Infrastructure Sensor-enabled Vehicle Data Generation using Multi-Sensor Fusion for Proactive Safety Applications at Work Zone

INFRASTRUCTURE SENSOR-ENABLED VEHICLE DA T A GENERA TION USING MUL TI-SENSOR FUSION FOR PROACTIVE SAFETY APPLICA TIONS A T WORK ZONE Suhala Rabab Saba Department of Civil, Construction & Environmental Engineering, The University of Alabama Smart Communities and Innovation Building (SCIB), 28 Kirkbride Lane, Tuscaloosa, AL 35487-0288 Email: ssaba@crimson.ua.edu Saba, Khan, Ahmad, Cao, Rahman, Zhao, Huynh, and Ozguven 3 ABSTRACT Infrastructure-based sensing and real-time trajectory generation hold significant promise for improving safety in high-risk roadway segments like work zones, yet practical deployments are hindered by perspective distortion, complex geometry, occlusions, and costs. This study tackles these barriers by (i) integrating roadside camera and LiDAR sensors into a cosimulation environment to develop a scalable, cost-effective vehicle detection and localization framework, and (ii) employing a Kalman Filter-based late fusion strategy to enhance trajectory consistency and accuracy. In simulation, the fusion algorithm reduced longitudinal error by up to 70% compared to individual sensors while preserving lateral accuracy within 1-3 meters. Field validation in an active work zone, using LiDAR, a radar-camera rig, and RTK-GPS as ground truth, demonstrated that the fused trajectories closely match real vehicle paths, even when single-sensor data are intermittent or degraded. These results confirm that KF based sensor fusion can reliably compensate for individual sensor limitations, providing precise and robust vehicle tracking capabilities. Our approach thus offers a practical pathway to deploy infrastructure-enabled multi-sensor systems for proactive safety measures in complex traffic environments. Keywords: work zone, fusion, lidar, camera, localization, safety Saba, Khan, Ahmad, Cao, Rahman, Zhao, Huynh, and Ozguven 4 INTRODUCTION Work zone crashes do not necessarily impact only the vehicles and people directly involved; instead, they have cascading effects that cause operational delays for passing vehicles and project completion delays for work zone contractors. The Federal Motor Carrier Safety Administration (FMCSA) report indicates that commercial motor vehicles (CMVs) are involved in one-third of work zone fatal crashes, although they represent only 5% of all vehicular traffic (1). In addition, speed is a contributing factor in 26% of all fatal work zone crashes (2). According to Jiao (2022) (3), 13% of CMV drivers are fatigued when they are involved in crashes.