Simulating hybrid magnonic quantum systems remains a challenge due to the large disparity between the timescales of the two systems. We present a massively parallel GPU-based simulation framework that enables fully coupled, large-scale modeling of on-chip magnon-photon circuits. T o accelerate design workflows, we develop a physics-informed machine learning surrogate trained on the simulation data, reducing computational cost while maintaining accuracy. This combined approach reveals real-time energy exchange dynamics and reproduces key phenomena such as anti-crossing behavior and the suppression of ferromagnetic resonance under strong electromagnetic fields. By addressing the multiscale and multiphysics challenges in magnon-photon modeling, our framework enables scalable simulation and rapid prototyping of next-generation quantum and spintronic devices. 1 Introduction Hybrid quantum systems, which combine distinct physical platforms, are a promising route toward advanced quantum technologies, as they harness strong interactions that may not be readily achievable in a single platform [1, 2]. These systems take many forms, coupling any two (or more) quantum platforms -- for example, superconducting qubits [3, 4], microwave resonators [5], single spins [6], spin ensembles [4, 7-9], or mechanical resonators [10-12] -- to harness strong interactions. These heterogeneous systems leverage complementary advantages of each component, but their rich multi-physics interactions pose formidable modeling challenges. A prominent example is cavity magnonics, where collective spin excitations (magnons) couple with microwave photons in a resonant cavity to form hybrid magnon-polariton modes when tuned into resonance [13-15]. These states are essential for quantum operations such as mode swapping [16, 17], quantum state storage [4, 18, 19], and dynamic control of energy exchange [19, 20]. The hallmark experimental signature of strong magnon-photon coupling is a pronounced avoided crossing (mode splitting) in the frequency spectrum, in agreement with theoretical predictions [21] and observed in many 3D [13, 22] and on-chip 2D [7, 8, 23] cavity based systems.

Designing high-performance substrate-integrated waveguide (SIW) filters with both closely spaced and widely separated resonances is challenging. Consequently, there is a growing need for robust methods that reduce reliance on time-consuming electromagnetic (EM) simulations. In this study, a deep learning-based framework was developed and validated for the inverse design of multi-mode SIW filters with both closely spaced and widely separated resonances. A series of SIW filters were designed, fabricated, and experimentally evaluated. A three-stage deep learning framework was implemented, consisting of a Feedforward Inverse Model (FIM), a Hybrid Inverse-Forward Residual Refinement Network (HiFR\textsuperscript{2}-Net), and an Iterative Residual Correction Network (IRC-Net). The design methodology and performance of each model were systematically analyzed. Notably, IRC-Net outperformed both FIM and HiFR\textsuperscript{2}-Net, achieving systematic error reduction over five correction iterations. Experimental results showed a reduction in mean squared error (MSE) from 0.00191 to 0.00146 and mean absolute error (MAE) from 0.0262 to 0.0209, indicating improved accuracy and convergence. The proposed framework demonstrates the capability to enable robust, accurate, and generalizable inverse design of complex microwave filters with minimal simulation cost. This approach is expected to facilitate rapid prototyping of advanced filter designs and could extend to other high-frequency components in microwave and millimeter-wave technologies.

The goal of inverse design in distributed circuits is to generate near-optimal designs that meet a desirable transfer function specification. Existing design exploration methods use some combination of strategies involving artificial grids, differentiable evaluation procedures, and specific template topologies. However, real-world design practices often require non-differentiable evaluation procedures, varying topologies, and near-continuous placement spaces. In this paper, we propose DCIDA, a design exploration framework that learns a near-optimal design sampling policy for a target transfer function. DCIDA decides all design factors in a compound single-step action by sampling from a set of jointly-trained conditional distributions generated by the policy. Utilizing an injective interdependent ``map", DCIDA transforms raw sampled design ``actions" into uniquely equivalent physical representations, enabling the framework to learn the conditional dependencies among joint ``raw'' design decisions. Our experiments demonstrate DCIDA's Transformer-based policy network achieves significant reductions in design error compared to state-of-the-art approaches, with significantly better fit in cases involving more complex transfer functions.

As free-space optical systems grow in scale and complexity, troubleshooting becomes increasingly time-consuming and, in the case of remote installations, perhaps impractical. An example of a task that is often laborious is the alignment of a high-finesse optical resonator, which is highly sensitive to the mode of the input beam. In this work, we demonstrate how machine learning can be used to achieve autonomous mode-matching of a free-space optical resonator with minimal supervision. Our approach leverages sample-efficient algorithms to reduce data requirements while maintaining a simple architecture for easy deployment. The reinforcement learning scheme that we have developed shows that automation is feasible even in systems prone to drift in experimental parameters, as may well be the case in real-world applications.

We present an end-to-end workflow for superconducting qubit readout that embeds co-designed Neural Networks (NNs) into the Quantum Instrumentation Control Kit (QICK). Capitalizing on the custom firmware and software of the QICK platform, which is built on Xilinx RFSoC FPGAs, we aim to leverage machine learning (ML) to address critical challenges in qubit readout accuracy and scalability. The workflow utilizes the hls4ml package and employs quantization-aware training to translate ML models into hardware-efficient FPGA implementations via user-friendly Python APIs. We experimentally demonstrate the design, optimization, and integration of an ML algorithm for single transmon qubit readout, achieving 96% single-shot fidelity with a latency of 32ns and less than 16% FPGA look-up table resource utilization. Our results offer the community an accessible workflow to advance ML-driven readout and adaptive control in quantum information processing applications.

Large language models (LLMs) such as ChatGPT, Gemini, LlaMa, and Claude are trained on massive quantities of text parsed from the internet and have shown a remarkable ability to respond to complex prompts in a manner often indistinguishable from humans. We present a LLM fine-tuned on up to 40,000 data that can predict electromagnetic spectra over a range of frequencies given a text prompt that only specifies the metasurface geometry. Results are compared to conventional machine learning approaches including feed-forward neural networks, random forest, linear regression, and K-nearest neighbor (KNN). Remarkably, the fine-tuned LLM (FT-LLM) achieves a lower error across all dataset sizes explored compared to all machine learning approaches including a deep neural network. We also demonstrate the LLM's ability to solve inverse problems by providing the geometry necessary to achieve a desired spectrum. LLMs possess some advantages over humans that may give them benefits for research, including the ability to process enormous amounts of data, find hidden patterns in data, and operate in higher-dimensional spaces. We propose that fine-tuning LLMs on large datasets specific to a field allows them to grasp the nuances of that domain, making them valuable tools for research and analysis.

Designing distributed filtering circuits (DFCs) is complex and time-consuming, with the circuit performance relying heavily on the expertise and experience of electronics engineers. However, manual design methods tend to have exceedingly low-efficiency. This study proposes a novel end-to-end automated method for fabricating circuits to improve the design of DFCs. The proposed method harnesses reinforcement learning (RL) algorithms, eliminating the dependence on the design experience of engineers. Thus, it significantly reduces the subjectivity and constraints associated with circuit design. The experimental findings demonstrate clear improvements in both design efficiency and quality when comparing the proposed method with traditional engineer-driven methods. In particular, the proposed method achieves superior performance when designing complex or rapidly evolving DFCs. Furthermore, compared to existing circuit automation design techniques, the proposed method demonstrates superior design efficiency, highlighting the substantial potential of RL in circuit design automation.

In multilingual speech recognition systems, a situation can often arise when the language is not known in advance, but the signal has already been received and is being processed. For such cases, some generalized model is needed that will be able to respond to phonetic differences and, depending on them, correctly recog-nize speech in the desired language. To build such a model, it is necessary to set the values of phonetic parameters, and then compare similar sounds, establishing significant differences.

Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series task NARMA-10. We demonstrate the existence of three regions, defined by the input power and the frequency detuning between the optical source and the microring resonance, that reveal the cavity transition from linear to nonlinear regimes. One of these regions offers very low error in time-series prediction under relatively low input power and number of nodes while the other regions either lack nonlinearity or become unstable. This study provides insight into the design of the MRR and the optimization of its physical properties for improving the prediction performance of time-delay reservoir computing.

Optical packet header recognition is an important signal processing task of optical communication networks. In this work, we propose an all-optical reservoir, consisting of integrated double-ring resonators (DRRs) as nodes, for fast and accurate optical packet header recognition. As the delay-bandwidth product (DBP) of the node is a key figure-of-merit in the reservoir, we adopt a deep reinforcement learning algorithm to maximize the DBPs for various types of DRRs, which has the advantage of full parameter space optimization and fast convergence speed. Intriguingly, the optimized DBPs of the DRRs in cascaded, parallel, and embedded configurations reach the same maximum value, which is believed to be the global maximum. Finally, 3-bit and 6-bit packet header recognition tasks are performed with the all-optical reservoir consisting of the optimized cascaded rings, which have greatly reduced chip size and the desired "flat-top" delay spectra. Using this optical computing scheme, word-error rates as low as 5*10-4 and 9*10-4 are achieved for 3-bit and 6-bit packet header recognition tasks, respectively, which are one order of magnitude better than the previously reported values.