Abstract--Weeds significantly reduce crop yields worldwide and pose major challenges to sustainable agriculture. Traditional weed management methods, primarily relying on chemical herbicides, risk environmental contamination and lead to the emergence of herbicide-resistant species. Precision weeding, leveraging computer vision and machine learning methods, offers a promising eco-friendly alternative but is often limited by reliance on high-power computational platforms. This work presents an optimized, low-power edge AI system for weeds detection based on the YOLOv8n object detector deployed on the STM32U575ZI microcontroller . Several compression techniques are applied to the detection model, including structured pruning, integer quantization and input image resolution scaling in order to meet strict hardware constraints. The model is trained and evaluated on the CropAndWeed dataset with 74 plant species, achieving a balanced trade-off between detection accuracy and efficiency. Our system supports real-time, in-situ weeds detection with a minimal energy consumption of 51.8mJ per inference, enabling scalable deployment in power-constrained agricultural environments. EEDS are widespread and persistent plants, known for their rapid reproduction and effective seed dispersal strategies. They are among the primary contributors to crop yield loss globally, posing a significant challenge for farmers and agricultural stakeholders [1].

Precise semantic segmentation of crops and weeds is necessary for agricultural weeding robots. However, training deep learning models requires large annotated datasets, which are costly to obtain in real fields. Synthetic data can reduce this burden, but the gap between simulated and real images remains a challenge. In this paper, we present a pipeline for procedural generation of synthetic crop-weed images using Blender, producing annotated datasets under diverse conditions of plant growth, weed density, lighting, and camera angle. We benchmark several state-of-the-art segmentation models on synthetic and real datasets and analyze their cross-domain generalization. Our results show that training on synthetic images leads to a sim-to-real gap of 10%, surpassing previous state-of-the-art methods. Moreover, synthetic data demonstrates good generalization properties, outperforming real datasets in cross-domain scenarios. These findings highlight the potential of synthetic agricultural datasets and support hybrid strategies for more efficient model training.

Uniform and excessive herbicide application in modern agriculture contributes to increased input costs, environmental pollution, and the emergence of herbicide resistant weeds. To address these challenges, we developed a vision guided, AI-driven variable rate sprayer system capable of detecting weed presence, estimating canopy size, and dynamically adjusting nozzle activation in real time. The system integrates lightweight YOLO11n and YOLO11n-seg deep learning models, deployed on an NVIDIA Jetson Orin Nano for onboard inference, and uses an Arduino Uno-based relay interface to control solenoid actuated nozzles based on canopy segmentation results. Indoor trials were conducted using 15 potted Hibiscus rosa sinensis plants of varying canopy sizes to simulate a range of weed patch scenarios. The YOLO11n model achieved a mean average precision (mAP@50) of 0.98, with a precision of 0.99 and a recall close to 1.0. The YOLO11n-seg segmentation model achieved a mAP@50 of 0.48, precision of 0.55, and recall of 0.52. System performance was validated using water sensitive paper, which showed an average spray coverage of 24.22% in zones where canopy was present. An upward trend in mean spray coverage from 16.22% for small canopies to 21.46% and 21.65% for medium and large canopies, respectively, demonstrated the system's capability to adjust spray output based on canopy size in real time. These results highlight the potential of combining real time deep learning with low-cost embedded hardware for selective herbicide application. Future work will focus on expanding the detection capabilities to include three common weed species in South Dakota: water hemp (Amaranthus tuberculatus), kochia (Bassia scoparia), and foxtail (Setaria spp.), followed by further validation in both indoor and field trials within soybean and corn production systems.

Weed control is a critical challenge in modern agriculture, as weeds compete with crops for essential nutrient resources, significantly reducing crop yield and quality. Traditional weed control methods, including chemical and mechanical approaches, have real-life limitations such as associated environmental impact and efficiency. An emerging yet effective approach is laser weeding, which uses a laser beam as the stem cutter. Although there have been studies that use deep learning in weed recognition, its application in intelligent laser weeding still requires a comprehensive understanding. Thus, this study represents the first empirical investigation of weed recognition for laser weeding. To increase the efficiency of laser beam cut and avoid damaging the crops of interest, the laser beam shall be directly aimed at the weed root. Yet, weed stem detection remains an under-explored problem. We integrate the detection of crop and weed with the localization of weed stem into one end-to-end system. To train and validate the proposed system in a real-life scenario, we curate and construct a high-quality weed stem detection dataset with human annotations. The dataset consists of 7,161 high-resolution pictures collected in the field with annotations of 11,151 instances of weed. Experimental results show that the proposed system improves weeding accuracy by 6.7% and reduces energy cost by 32.3% compared to existing weed recognition systems.

Sustainable agriculture plays a crucial role in ensuring world food security for consumers. A critical challenge faced by sustainable precision agriculture is weed growth, as weeds share essential resources with the crops, such as water, soil nutrients, and sunlight, which notably affect crop yields. The traditional methods employed to combat weeds include the usage of chemical herbicides and manual weed removal methods. However, these could damage the environment and pose health hazards. The adoption of automated computer vision technologies and ground agricultural consumer electronic vehicles in precision agriculture offers sustainable, low-carbon solutions. However, prior works suffer from issues such as low accuracy and precision and high computational expense. This work proposes EcoWeedNet, a novel model with enhanced weed detection performance without adding significant computational complexity, aligning with the goals of low-carbon agricultural practices. Additionally, our model is lightweight and optimal for deployment on ground-based consumer electronic agricultural vehicles and robots. The effectiveness of the proposed model is demonstrated through comprehensive experiments on the CottonWeedDet12 benchmark dataset reflecting real-world scenarios. EcoWeedNet achieves performance close to that of large models yet with much fewer parameters. (approximately 4.21% of the parameters and 6.59% of the GFLOPs of YOLOv4). This work contributes effectively to the development of automated weed detection methods for next-generation agricultural consumer electronics featuring lower energy consumption and lower carbon footprint. This work paves the way forward for sustainable agricultural consumer technologies.

In automated crop protection tasks such as weed control, disease diagnosis, and pest monitoring, deep learning has demonstrated significant potential. However, these advanced models rely heavily on high-quality, diverse datasets, often limited and costly in agricultural settings. Traditional data augmentation can increase dataset volume but usually lacks the real-world variability needed for robust training. This study presents a new approach for generating synthetic images to improve deep learning-based object detection models for intelligent weed control. Our GenAI-based image generation pipeline integrates the Segment Anything Model (SAM) for zero-shot domain adaptation with a text-to-image Stable Diffusion Model, enabling the creation of synthetic images that capture diverse real-world conditions. We evaluate these synthetic datasets using lightweight YOLO models, measuring data efficiency with mAP50 and mAP50-95 scores across varying proportions of real and synthetic data. Notably, YOLO models trained on datasets with 10% synthetic and 90% real images generally demonstrate superior mAP50 and mAP50-95 scores compared to those trained solely on real images. This approach not only reduces dependence on extensive real-world datasets but also enhances predictive performance. The integration of this approach opens opportunities for achieving continual self-improvement of perception modules in intelligent technical systems.

The advancements in precision agriculture are vital to support the increasing demand for global food supply. Precision spot spraying is a major step towards reducing chemical usage for pest and weed control in agriculture. A novel spot spraying algorithm that autonomously detects weeds and performs trajectory planning for the sprayer nozzle has been proposed. Furthermore, this research introduces a vision-based autonomous navigation system that operates through the detected crop row, effectively synchronizing with an autonomous spraying algorithm. This proposed system is characterized by its cost effectiveness that enable the autonomous spraying of herbicides onto detected weeds.

Automatic weeding technologies have attained a lot of attention lately, because of the harms and challenges weeds are causing for livestock farming, in addition to that weeds reduce yields. We are targeting automatic and mechanical Rumex weeding in open pasture fields using light weight mobile field robot technologies. We describe a mobile weeding robot with GNSS navigation, 3D computer vision for weed detection, and a robot arm with a mechanical weeding tool. Our main contribution is showing the feasibility of light weight robot, sensor, and tool technologies in mechanical removal of weed seedlings.

Blackgrass (Alopecurus myosuroides) is a competitive weed that has wide-ranging impacts on food security by reducing crop yields and increasing cultivation costs. In addition to the financial burden on agriculture, the application of herbicides as a preventive to blackgrass can negatively affect access to clean water and sanitation. The WeedScout project introduces a Real-Rime Autonomous Black-Grass Classification and Mapping (RT-ABGCM), a cutting-edge solution tailored for real-time detection of blackgrass, for precision weed management practices. Leveraging Artificial Intelligence (AI) algorithms, the system processes live image feeds, infers blackgrass density, and covers two stages of maturation. The research investigates the deployment of You Only Look Once (YOLO) models, specifically the streamlined YOLOv8 and YOLO-NAS, accelerated at the edge with the NVIDIA Jetson Nano (NJN). By optimising inference speed and model performance, the project advances the integration of AI into agricultural practices, offering potential solutions to challenges such as herbicide resistance and environmental impact. Additionally, two datasets and model weights are made available to the research community, facilitating further advancements in weed detection and precision farming technologies.

Effective weed control plays a crucial role in optimizing crop yield and enhancing agricultural product quality. However, the reliance on herbicide application not only poses a critical threat to the environment but also promotes the emergence of resistant weeds. Fortunately, recent advances in precision weed management enabled by ML and DL provide a sustainable alternative. Despite great progress, existing algorithms are mainly developed based on supervised learning approaches, which typically demand large-scale datasets with manual-labeled annotations, which is time-consuming and labor-intensive. As such, label-efficient learning methods, especially semi-supervised learning, have gained increased attention in the broader domain of computer vision and have demonstrated promising performance. These methods aim to utilize a small number of labeled data samples along with a great number of unlabeled samples to develop high-performing models comparable to the supervised learning counterpart trained on a large amount of labeled data samples. In this study, we assess the effectiveness of a semi-supervised learning framework for multi-class weed detection, employing two well-known object detection frameworks, namely FCOS and Faster-RCNN. Specifically, we evaluate a generalized student-teacher framework with an improved pseudo-label generation module to produce reliable pseudo-labels for the unlabeled data. To enhance generalization, an ensemble student network is employed to facilitate the training process. Experimental results show that the proposed approach is able to achieve approximately 76\% and 96\% detection accuracy as the supervised methods with only 10\% of labeled data in CottenWeedDet3 and CottonWeedDet12, respectively. We offer access to the source code, contributing a valuable resource for ongoing semi-supervised learning research in weed detection and beyond.