Soft robots are powerful tools for manipulating delicate objects, yet their adoption is hindered by two gaps: the lack of integrated tactile sensing and sensor signal distortion caused by actuator deformations. This paper addresses these challenges by introducing the SoftMag actuator: a magnetic tactile-sensorized soft actuator. Unlike systems relying on attached sensors or treating sensing and actuation separately, SoftMag unifies them through a shared architecture while confronting the mechanical parasitic effect, where deformations corrupt tactile signals. A multiphysics simulation framework models this coupling, and a neural-network-based decoupling strategy removes the parasitic component, restoring sensing fidelity. Experiments including indentation, quasi-static and step actuation, and fatigue tests validate the actuator's performance and decoupling effectiveness. Building upon this foundation, the system is extended into a two-finger SoftMag gripper, where a multi-task neural network enables real-time prediction of tri-axial contact forces and position. Furthermore, a probing-based strategy estimates object firmness during grasping. Validation on apricots shows a strong correlation (Pearson r over 0.8) between gripper-estimated firmness and reference measurements, confirming the system's capability for non-destructive quality assessment. Results demonstrate that combining integrated magnetic sensing, learning-based correction, and real-time inference enables a soft robotic platform that adapts its grasp and quantifies material properties. The framework offers an approach for advancing sensorized soft actuators toward intelligent, material-aware robotics.

Department of Mathematical and Computer Sciences, Physical Sciences and Earth Sciences, University of Messina, 8166 Messina, Italy Complex and even chaotic dynamics, though prevalent in many natural and engineered systems, has been largely avoided in the design of electromechanical systems due to concerns about wear and controlability. Here, we demonstrate that complex dynamics might be particularly advantageous in soft robotics, offering new functionalities beyond motion not easily achievable with traditional actuation methods. We designed and realized resilient magnetic soft actuators capable of operating in a tunable dynamic regime for tens of thousands cycles without fatigue. We experimentally demonstrated the application of these actuators for true random number generation and stochastic computing. These findings show that exploring the complex dynamics in soft robotics would extend the application scenarios in soft computing, human-robot interaction and collaborative robots as we demonstrate with biomimetic blinking and randomized voice modulation. A large number of mechanical systems, including simple ones such as the double pendulum, exhibit dynamics characterized by deterministic periodic and chaotic responses depending on the excitation frequency f and amplitude A of the applied force [1]. Mechanical systems with a tendency to chaotisation demonstrate multiple resonances and various transitions to chaos [2]. Today, the concept of complexity and, especially, deterministic chaos that refers to systems without stochastic fluctuations jet losing stability of phase space trajectories is explored for a variety of directions [3] even including biological systems [4] or optics [5]. In particular, chaos is a fundamental aspect of electromechanical systems and is broadly explored in motion planning for mobile rigid robots, fluid mixing, and improving energy harvesting, as well as in mechanisms used in washing machines, dishwashers, and air conditioners [6]. Although the analysis of traditional robotics and mechanisms has revealed inherent chaotic dynamics [7], chaos can also be intentionally generated through nonlinear feedback [6] to achieve specific functionalities. In contrast to rigid mechanisms, soft actuators can facilitate transition into complex dynamics without the need for dedicated feedback algorithms. Mechanically soft actuators do not possess any rigid components in their embodiment rendering them ideally suited to explore complex and even chaotic dynamics which is typically observed at higher frequencies (Supplementary Tables 1 and 2). The inherent nonlinear oscillations emerging in soft actuators for specific parameter values [8, 9] can be applied for secure, biomimetic, and soft computing applications.

Soft robots have been increasingly utilized as sophisticated tools in physical rehabilitation, particularly for assisting patients with neuromotor impairments. However, many soft robotics for rehabilitation applications are characterized by limitations such as slow response times, restricted range of motion, and low output force. There are also limited studies on the precise position and force control of wearable soft actuators. Furthermore, not many studies articulate how bellow-structured actuator designs quantitatively contribute to the robots' capability. This study introduces a paradigm of upper limb soft actuator design. This paradigm comprises two actuators: the Lobster-Inspired Silicone Pneumatic Robot (LISPER) for the elbow and the Scallop-Shaped Pneumatic Robot (SCASPER) for the shoulder. LISPER is characterized by higher bandwidth, increased output force/torque, and high linearity. SCASPER is characterized by high output force/torque and simplified fabrication processes. Comprehensive analytical models that describe the relationship between pressure, bending angles, and output force for both actuators were presented so the geometric configuration of the actuators can be set to modify the range of motion and output forces. The preliminary test on a dummy arm is conducted to test the capability of the actuators.

The rapid advancement in physical human-robot interaction (HRI) has accelerated the development of soft robot designs and controllers. Controlling soft robots, especially soft hand grasping, is challenging due to their continuous deformation, motivating the use of reduced model-based controllers for real-time dynamic performance. Most existing models, however, suffer from computational inefficiency and complex parameter identification, limiting their real-time applicability. To address this, we propose a paradigm coupling Pseudo-Rigid Body Modeling with the Logarithmic Decrement Method for parameter estimation (PRBM plus LDM). Using a soft robotic hand test bed, we validate PRBM plus LDM for predicting position and force output from pressure input and benchmark its performance. We then implement PRBM plus LDM as the basis for closed-loop position and force controllers. Compared to a simple PID controller, the PRBM plus LDM position controller achieves lower error (average maximum error across all fingers: 4.37 degrees versus 20.38 degrees). For force control, PRBM plus LDM outperforms constant pressure grasping in pinching tasks on delicate objects: potato chip 86 versus 82.5, screwdriver 74.42 versus 70, brass coin 64.75 versus 35. These results demonstrate PRBM plus LDM as a computationally efficient and accurate modeling technique for soft actuators, enabling stable and flexible grasping with precise force regulation.

This paper presents a unified framework to analyze the manipulability and compliance of modular soft-rigid hybrid robotic fingers. The approach applies to both hydraulic and pneumatic actuation systems. A Jacobian-based formulation maps actuator inputs to joint and task-space responses. Hydraulic actuators are modeled under incompressible assumptions, while pneumatic actuators are described using nonlinear pressure-volume relations. The framework enables consistent evaluation of manipulability ellipsoids and compliance matrices across actuation modes. We validate the analysis using two representative hands: DexCo (hydraulic) and Edgy-2 (pneumatic). Results highlight actuation-dependent trade-offs in dexterity and passive stiffness. These findings provide insights for structure-aware design and actuator selection in soft-rigid robotic fingers.

The nonlinear mechanical response of soft materials and slender structures is purposefully harnessed to program functions by design in soft robotic actuators, such as sequencing, amplified response, fast energy release, etc. However, typical designs of nonlinear actuators - e.g. balloons, inverted membranes, springs - have limited design parameters space and complex fabrication processes, hindering the achievement of more elaborated functions. Mechanical metamaterials, on the other hand, have very large design parameter spaces, which allow fine-tuning of nonlinear behaviours. In this work, we present a novel approach to fabricate nonlinear inflatables based on metamaterials and origami (Meta-Ori) as monolithic parts that can be fully 3D printed via Fused Deposition Modeling (FDM) using thermoplastic polyurethane (TPU) commercial filaments. Our design consists of a metamaterial shell with cylindrical topology and nonlinear mechanical response combined with a Kresling origami inflatable acting as a pneumatic transmitter. We develop and release a design tool in the visual programming language Grasshopper to interactively design our Meta-Ori. We characterize the mechanical response of the metashell and the origami, and the nonlinear pressure-volume curve of the Meta-Ori inflatable and, lastly, we demonstrate the actuation sequencing of a bi-segment monolithic Meta-Ori soft actuator.

The intrinsic nonlinearities of soft robots present significant control but simultaneously provide them with rich computational potential. Reservoir computing (RC) has shown effectiveness in online learning systems for controlling nonlinear systems such as soft actuators. Conventional RC can be extended into physical reservoir computing (PRC) by leveraging the nonlinear dynamics of soft actuators for computation. This paper introduces a PRC-based online learning framework to control the motion of a pneumatic soft bending actuator, utilizing another pneumatic soft actuator as the PRC model. Unlike conventional designs requiring two RC models, the proposed control system employs a more compact architecture with a single RC model. Additionally, the framework enables zero-shot online learning, addressing limitations of previous PRC-based control systems reliant on offline training. Simulations and experiments validated the performance of the proposed system. Experimental results indicate that the PRC model achieved superior control performance compared to a linear model, reducing the root-mean-square error (RMSE) by an average of over 37% in bending motion control tasks. The proposed PRC-based online learning control framework provides a novel approach for harnessing physical systems' inherent nonlinearities to enhance the control of soft actuators.

Soft robots, made from compliant materials, exhibit complex dynamics due to their flexibility and high degrees of freedom. Controlling soft robots presents significant challenges, particularly underactuation, where the number of inputs is fewer than the degrees of freedom. This research aims to develop a digital twin for multi-fingered soft grippers to advance the development of underactuation algorithms. The digital twin is designed to capture key effects observed in soft robots, such as nonlinearity, hysteresis, uncertainty, and time-varying phenomena, ensuring it closely replicates the behavior of a real-world soft gripper. Uncertainty is simulated using the Monte Carlo method. With the digital twin, a Q-learning algorithm is preliminarily applied to identify the optimal motion speed that minimizes uncertainty caused by the soft robots. Underactuated motions are successfully simulated within this environment. This digital twin paves the way for advanced machine learning algorithm training.

Robotic systems' mobility is constrained by power sources and wiring. While pneumatic actuators remain tethered to air supplies, we developed a new actuator utilizing light energy. Inspired by nocturnal animals' eyes, we designed a bilayer soft actuator incorporating Laser-Induced Graphene (LIG) on the inner surface of a silicone layer. This design maintains silicone's transparency and flexibility while achieving 54% faster response time compared to conventional actuators through enhanced photothermal conversion.

Soft pneumatic fingers are of great research interest. However, their significant potential is limited as most of them can generate only one motion, mostly bending. The conventional design of soft fingers does not allow them to switch to another motion mode. In this paper, we developed a novel multi-modal and single-actuated soft finger where its motion mode is switched by changing the finger's temperature. Our soft finger is capable of switching between three distinctive motion modes: bending, twisting, and extension-in approximately five seconds. We carried out a detailed experimental study of the soft finger and evaluated its repeatability and range of motion. It exhibited repeatability of around one millimeter and a fifty percent larger range of motion than a standard bending actuator. We developed an analytical model for a fiber-reinforced soft actuator for twisting motion. This helped us relate the input pressure to the output twist radius of the twisting motion. This model was validated by experimental verification. Further, a soft robotic gripper with multiple grasp modes was developed using three actuators. This gripper can adapt to and grasp objects of a large range of size, shape, and stiffness. We showcased its grasping capabilities by successfully grasping a small berry, a large roll, and a delicate tofu cube.