High-resolution imaging from array data in unknown inhomogeneous ambient media requires estimating both the medium properties and the object characteristics. For diverse measurements collected from different sources in different, changing media, we introduce in this paper an algorithm that recovers the ambient media properties needed for high-resolution imaging as well as the source locations and strengths that constitute the imaging target. This algorithm extends and improves upon our previous work on imaging through random media using array data. Previously, we addressed imaging through a single unknown random medium, either weakly scattering [ 1 ] or strongly scattering [ 2 ].

Large multiple antenna arrays coupled with accurate beamforming are essential in terahertz (THz) communications to ensure link reliability. However, as the number of antennas increases, beam alignment (focusing) and beam tracking in mobile networks incur prohibitive overhead. Additionally, the near-field region expands both with the size of antenna arrays and the carrier frequency, calling for adjustments in the beamforming to account for spherical wavefront instead of the conventional planar wave assumption. In this letter, we introduce a novel beam coherence time for mobile THz networks, to drastically reduce the rate of beam updates. Then, we propose a deep learning model, relying on a simple feedforward neural network with a time-dependent input, to predict the beam coherence time and adjust the beamforming on the fly with minimal overhead. Our numerical results demonstrate the effectiveness of the proposed approach by enabling higher data rates while reducing the overhead, especially at high (i.e., vehicular) mobility.

In recent years, deep learning-based methods have been proposed for solving inverse scattering problems (ISPs), but most of them heavily rely on data and suffer from limited generalization capabilities. In this paper, a new solving scheme is proposed where the solution is iteratively updated following the updating of the physics-driven neural network (PDNN), the hyperparameters of which are optimized by minimizing the loss function which incorporates the constraints from the collected scattered fields and the prior information about scatterers. Unlike data-driven neural network solvers, PDNN is trained only requiring the input of collected scattered fields and the computation of scattered fields corresponding to predicted solutions, thus avoids the generalization problem. Moreover, to accelerate the imaging efficiency, the subregion enclosing the scatterers is identified. Numerical and experimental results demonstrate that the proposed scheme has high reconstruction accuracy and strong stability, even when dealing with composite lossy scatterers.

This work presents a n approach to the inverse design of scattering systems by modifying the transmission matrix u sing reinforcement learning . We utilize Proximal Policy Optimization to navigate the highly non - convex landscape of the object function to achieve three types of transmission matri ces: (1) F ixed - ratio power conversion and z ero - transmission mode in r ank - 1 matri ces, (2) exceptional points with degenerate eigenvalues and unidirectional mode conversion, and (3) uniform channel participation is enforced when transmission eigenvalues are degenerate . Engineering wave propagation is a fast - moving domain. S ingularit ies of the scattering matrix (SM), or sub - SM, such as the transmission matrix (TM) or reflection matrix (RM) encode the scattering behavior of a n open system and can be exploited in sensing, switching, lasing and energy deposition [1,2] . Open system s can be described by effective non - Hermitian Hamiltonians, and their resonance frequencies corresponds to poles of SM. Frequency points at which the response vanishes are described by zeros, which are also usually complex value. Incident radiation is completely absorbed when a zero of the SM is brought to the real axis. Such coherent perfect absorption (CPA) is the time reversal of an outgoing wave at the lasing threshold [4] .

Recent advancements in robotics, control, and machine learning have facilitated progress in the challenging area of object manipulation. These advancements include, among others, the use of deep neural networks to represent dynamics that are partially observed by robot sensors, as well as effective control using sparse control signals. In this work, we explore a more general problem: the manipulation of acoustic waves, which are partially observed by a robot capable of influencing the waves through spatially sparse actuators. This problem holds great potential for the design of new artificial materials, ultrasonic cutting tools, energy harvesting, and other applications. We develop an efficient data-driven method for robot learning that is applicable to either focusing scattered acoustic energy in a designated region or suppressing it, depending on the desired task. The proposed method is better in terms of a solution quality and computational complexity as compared to a state-of-the-art learning based method for manipulation of dynamical systems governed by partial differential equations. Furthermore our proposed method is competitive with a classical semi-analytical method in acoustics research on the demonstrated tasks. We have made the project code publicly available, along with a web page featuring video demonstrations: https://gladisor.github.io/waves/.

We propose a methodology that exploits large and diverse data sets to accurately estimate the ambient medium's Green's functions in strongly scattering media. Given these estimates, obtained with and without the use of neural networks, excellent imaging results are achieved, with a resolution that is better than that of a homogeneous medium. This phenomenon, also known as super-resolution, occurs because the ambient scattering medium effectively enhances the physical imaging aperture. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.

Inverse Synthetic Aperture Radar (ISAR) imaging presents a formidable challenge when it comes to small everyday objects due to their limited Radar Cross-Section (RCS) and the inherent resolution constraints of radar systems. Existing ISAR reconstruction methods including backprojection (BP) often require complex setups and controlled environments, rendering them impractical for many real-world noisy scenarios. In this paper, we propose a novel Analysis-through-Synthesis (ATS) framework enabled by Neural Radiance Fields (NeRF) for high-resolution coherent ISAR imaging of small objects using sparse and noisy Ultra-Wideband (UWB) radar data with an inexpensive and portable setup. Our end-to-end framework integrates ultra-wideband radar wave propagation, reflection characteristics, and scene priors, enabling efficient 2D scene reconstruction without the need for costly anechoic chambers or complex measurement test beds. With qualitative and quantitative comparisons, we demonstrate that the proposed method outperforms traditional techniques and generates ISAR images of complex scenes with multiple targets and complex structures in Non-Line-of-Sight (NLOS) and noisy scenarios, particularly with limited number of views and sparse UWB radar scans. This work represents a significant step towards practical, cost-effective ISAR imaging of small everyday objects, with broad implications for robotics and mobile sensing applications.

The inverse medium problem, inherently ill-posed and nonlinear, presents significant computational challenges. This study introduces a novel approach by integrating a Neumann series structure within a neural network framework to effectively handle multiparameter inputs. Experiments demonstrate that our methodology not only accelerates computations but also significantly enhances generalization performance, even with varying scattering properties and noisy data. The robustness and adaptability of our framework provide crucial insights and methodologies, extending its applicability to a broad spectrum of scattering problems. These advancements mark a significant step forward in the field, offering a scalable solution to traditionally complex inverse problems.

In this work, we propose a deep learning-based imaging method for addressing the multi-frequency electromagnetic (EM) inverse scattering problem (ISP). By combining deep learning technology with EM physical laws, we have successfully developed a multi-frequency neural Born iterative method (NeuralBIM), guided by the principles of the single-frequency NeuralBIM. This method integrates multitask learning techniques with NeuralBIM's efficient iterative inversion process to construct a robust multi-frequency Born iterative inversion model. During training, the model employs a multitask learning approach guided by homoscedastic uncertainty to adaptively allocate the weights of each frequency's data. Additionally, an unsupervised learning method, constrained by the physical laws of ISP, is used to train the multi-frequency NeuralBIM model, eliminating the need for contrast and total field data. The effectiveness of the multi-frequency NeuralBIM is validated through synthetic and experimental data, demonstrating improvements in accuracy and computational efficiency for solving ISP. Moreover, this method exhibits strong generalization capabilities and noise resistance. The multi-frequency NeuralBIM method explores a novel inversion method for multi-frequency EM data and provides an effective solution for the electromagnetic ISP of multi-frequency data.

Objective: The transmit encoding model for synthetic aperture imaging is a robust and flexible framework for understanding the effects of acoustic transmission on ultrasound image reconstruction. Our objective is to use machine learning (ML) to construct scanning sequences, parameterized by time delays and apodization weights, that produce high-quality B-mode images. Approach: We use a custom ML model in PyTorch with simulated RF data from Field II to probe the space of possible encoding sequences for those that minimize a loss function that describes image quality. This approach is made computationally feasible by a novel formulation of the derivative for delay-and-sum beamforming. Main Results: When trained for a specified experimental setting (imaging domain, hardware restrictions, etc.), our ML model produces optimized encoding sequences that, when deployed in the REFoCUS imaging framework, improve a number of standard quality metrics over conventional sequences including resolution, field of view, and contrast. We demonstrate these results experimentally on both wire targets and a tissue-mimicking phantom. Significance: This work demonstrates that the set of commonly used encoding schemes represent only a narrow subset of those available. Additionally, it demonstrates the value for ML tasks in synthetic transmit aperture imaging to consider the beamformer within the model, instead of purely as a post-processing step.