Abstract-- Robotic exploration in extreme environments--such as caves, oceans, and planetary surfaces--poses significant challenges, particularly in locomotion across diverse terrains. Conventional wheeled or legged robots often struggle in these contexts due to surface variability. This paper presents ARCSnake V2, an amphibious, screw-propelled, snake-like robot designed for teleoperated or autonomous locomotion across land, granular media, and aquatic environments. ARCSnake V2 combines the high mobility of hyper-redundant snake robots with the terrain versatility of Archimedean screw propulsion. Key contributions include a water-sealed mechanical design with serially linked screw and joint actuation, an integrated buoyancy control system, and teleoperation via a kinematically-matched handheld controller . The robot's design and control architecture enable multiple locomotion modes--screwing, wheeling, and sidewinding--with smooth transitions between them. Robotic exploration in extreme environments, such as caves, oceans and planetary surfaces, poses significant challenges for the diverse set of terrains [1].

Movement disorders impact muscle strength and mobility, and despite therapeutic efforts, many people with movement disorders have challenges functioning independently. Soft wearable robots, or exosuits, offer a promising solution for continuous daily support, however, commercially viable devices are not widely available. Here, we introduce a design framework for lower limb exosuits centered on a soft pneumatically driven fabric-based actuator. Our design consists of a novel multi-material textile sleeve that incorporates braided mesh and knit-elastic materials to realize hyper-bending actuators. The actuators incorporate 3D-printed self-sealing end caps that are attached to a semi-rigid human-robot interface to secure them to the body. We will demonstrate the effectiveness of our exosuit in generating enough force to assist during sit-to-stand transitions.

This paper details the development of an interactive sculpture built from deprecated hardware technology and intentionally decomposable, transient materials. We detail a case study of "Strain" - an emotive prototype that reclaims two orphaned digital artifacts to power a kinetic sculpture made of common disposable objects. We use the Myo, an abandoned myoelectric armband, in concert with the Programmable Air, a soft-robotics prototyping project, to manipulate a pneumatic bladder array constructed from condoms, bamboo skewers, and a small library of 3D printed PLA plastic connectors designed to work with these generic parts. The resulting sculpture achieves surprisingly organic actuation. The goal of this project is to produce several reusable components: software to resuscitate the Myo Armband, homeostasis software for the Programmable Air or equivalent pneumatic projects, and a library of easily-printed parts that will work with generic bamboo disposables for sculptural prototyping. This project works to develop usable, repeatable engineering by applying it to a slightly whimsical object that promotes a strong emotional response in its audience. Through this, we transform the disposable into the sustainable. In this paper, we reflect on project-based insights into rescuing and revitalizing abandoned consumer electronics for future works.

Soft Robots distinguish themselves from traditional robots by embracing flexible kinematics. Because of their recent emergence, there exist numerous uncharted territories, including novel actuators, manufacturing processes, and advanced control methods. This research is centred on the design, fabrication, and control of a pneumatic soft robot. The principal objective is to develop a modular soft robot featuring with multiple segments, each one of three degrees of freedom. This yields to tubular structure with five independent degrees of freedom, enabling motion across three spatial dimensions. Physical construction leverages tin-cured silicone and a wax casting method, refined through iterative processes. 3D-printed PLA moulds, filled with silicone, yield the desired model, while bladder-like structures, are formed within using solidified paraffin wax positive moulds. For control, an empirically fine-tuned open-loop system is adopted. The project culminates in rigorous testing bending ability and weight carrying capacity and possible applications are discussed.

Data augmentation (DA) is a key factor in medical image analysis, such as in prostate cancer (PCa) detection on magnetic resonance images. State-of-the-art computer-aided diagnosis systems still rely on simplistic spatial transformations to preserve the pathological label post transformation. However, such augmentations do not substantially increase the organ as well as tumor shape variability in the training set, limiting the model's ability to generalize to unseen cases with more diverse localized soft-tissue deformations. We propose a new anatomy-informed transformation that leverages information from adjacent organs to simulate typical physiological deformations of the prostate and generates unique lesion shapes without altering their label. Due to its lightweight computational requirements, it can be easily integrated into common DA frameworks. We demonstrate the effectiveness of our augmentation on a dataset of 774 biopsy-confirmed examinations, by evaluating a state-of-the-art method for PCa detection with different augmentation settings.

The ongoing deep learning revolution has allowed computers to outclass humans in various games and perceive features imperceptible to humans during classification tasks. Current machine learning techniques have clearly distinguished themselves in specialized tasks. However, we have yet to see robots capable of performing multiple tasks at an expert level. Most work in this field is focused on the development of more sophisticated learning algorithms for a robot's controller given a largely static and presupposed robotic design. By focusing on the development of robotic bodies, rather than neural controllers, I have discovered that robots can be designed such that they overcome many of the current pitfalls encountered by neural controllers in multitask settings. Through this discovery, I also present novel metrics to explicitly measure the learning ability of a robotic design and its resistance to common problems such as catastrophic interference. Traditionally, the physical robot design requires human engineers to plan every aspect of the system, which is expensive and often relies on human intuition. In contrast, within the field of evolutionary robotics, evolutionary algorithms are used to automatically create optimized designs, however, such designs are often still limited in their ability to perform in a multitask setting. The metrics created and presented here give a novel path to automated design that allow evolved robots to synergize with their controller to improve the computational efficiency of their learning while overcoming catastrophic interference. Overall, this dissertation intimates the ability to automatically design robots that are more general purpose than current robots and that can perform various tasks while requiring less computation.

Abstract--Soft underwater robots typically explore bioinspired designs at the expense of power efficiency when compared to traditional underwater robots, which limits their practical use in real-world applications. A soft hydrostatic pressure sensor is configured as a bangbang controller actuating a swim bladder made from silicone balloons. Due to its simple design, low cost, and ease of fabrication using FDM printing and soft lithography, it serves as a starting point for the exploration of non-electronic underwater soft robots. A. Traditional Underwater Gliders Over the last several decades, underwater gliders have gained popularity among autonomous underwater vehicles (AUVs) [1], [2]. Compared to other AUVs, underwater gliders can achieve greater traveling distances, lower power consumption, and improved cost effectiveness.

Finding a realistic deformation that transforms one image into another, in case large deformations are required, is considered a key challenge in medical image analysis. Having a proper image registration approach to achieve this could unleash a number of applications requiring information to be transferred between images. Clinical adoption is currently hampered by many existing methods requiring extensive configuration effort before each use, or not being able to (realistically) capture large deformations. A recent multi-objective approach that uses the Multi-Objective Real-Valued Gene-pool Optimal Mixing Evolutionary Algorithm (MO-RV-GOMEA) and a dual-dynamic mesh transformation model has shown promise, exposing the trade-offs inherent to image registration problems and modeling large deformations in 2D. This work builds on this promise and introduces MOREA: the first evolutionary algorithm-based multi-objective approach to deformable registration of 3D images capable of tackling large deformations. MOREA includes a 3D biomechanical mesh model for physical plausibility and is fully GPU-accelerated. We compare MOREA to two state-of-the-art approaches on abdominal CT scans of 4 cervical cancer patients, with the latter two approaches configured for the best results per patient. Without requiring per-patient configuration, MOREA significantly outperforms these approaches on 3 of the 4 patients that represent the most difficult cases.

Nature provides several examples of organisms that utilize shape change as a means of operating in challenging, dynamic environments. For example, the spider Araneus Rechenbergi [1, 2] and the caterpillar of the Mother-of-Pearl Moth (Pleurotya ruralis) [3] transition from walking gaits to rolling in an attempt to escape predation. Across larger time scales, caterpillar-tobutterfly metamorphosis enables land to air transitions, while mobile to sessile metamorphosis, as observed in sea squirts, is accompanied by radical morphological change. Inspired by such change, engineers have created caterpillar-like rolling [4], modular [5, 6, 7], tensegrity [8, 9], plant-like growing [10], and origami [11, 12] robots that are capable of some degree of shape change. However, progress toward robots which dynamically adapt their resting shape to attain different modes of locomotion is still limited. Further, design of such robots and their controllers is still a manually intensive process. Despite the growing recognition of the importance of morphology and embodiment on enabling intelligent behavior in robots [13], most previous studies have approached the challenge of operating in multiple environments primarily through the design of appropriate control strategies.

Deep learning advanced to one of the most important technologies in almost all medical fields. Especially in areas, related to medical imaging it plays a big role. However, in interventional radiotherapy (brachytherapy) deep learning is still in an early phase. In this review, first, we investigated and scrutinised the role of deep learning in all processes of interventional radiotherapy and directly related fields. Additionally we summarised the most recent developments. To reproduce results of deep learning algorithms both source code and training data must be available. Therefore, a second focus of this work was on the analysis of the availability of open source, open data and open models. In our analysis, we were able to show that deep learning plays already a major role in some areas of interventional radiotherapy, but is still hardly presented in others. Nevertheless, its impact is increasing with the years, partly self-propelled but also influenced by closely related fields. Open source, data and models are growing in number but are still scarce and unevenly distributed among different research groups. The reluctance in publishing code, data and models limits reproducibility and restricts evaluation to mono-institutional datasets. Summarised, deep learning will change positively the workflow of interventional radiotherapy but there is room for improvement when it comes to reproducible results and standardised evaluation methods.