A New 10-mg SMA-Based Fast Bimorph Actuator for Microrobotics

-- We present a new millimeter-scale bimorph actuator for microrobotic applications, driven by feedforward controlled shape-memory alloy (SMA) wires. The device weighs 10 mg, measures 14 mm in length, and occupies a volume of 4.8 mm The experimentally measured operational bandwidth is on the order of 20 Hz, and the unimorph and bimorph maximum low-frequency displacement outputs are on the order of 3.5 and 7 mm, respectively. T o test and demonstrate the functionality and suitability of the actuator for microrobotics, we developed the Fish-&-Ribbon-Inspired Small Swimming Harmonic roBot (FRISSHBot). Loosely inspired by carangiformes, the FRISSHBot leverages fluid-structure interaction (FSI) phenomena to propel itself forward, weighs 30 mg, measures 34 mm in length, operates at frequencies of up to 4 Hz, and swims at speeds of up to 3.06 mm s This robot is the lightest and smallest swimmer with onboard actuation developed to date. The vision of insect-scale robotic swarms working in harmony with humans to complete essential tasks for society will become a reality only once critical challenges in microfabrication, sensing, actuation, power, and computation are solved. One of these challenges is the creation of lightweight microactuators with low power consumption and versatile functionality. Numerous advanced and novel mm-to-cm-scale microsystems have been developed during the past few years using predominantly piezoelectric [1]-[8], electromagnetic [9]-[12], dielectric-elastomer (DE) [13]- [16], rotational motor [17]-[20], and shape-memory alloy (SMA) [21]-[25] actuation technologies. While, in the aggregate, these results represent innovation and progress in microrobotic design, rapid prototyping, control performance, autonomy, and energy efficiency, all the platforms presented in [1]-[20] are limited by the need for complex electronics and lack of sources of power with high energy densities. For obvious reasons, microactuators that require low operational power and simple electronics, generate high-force outputs, and exhibit high versatility are a superior choice for advanced autonomous microrobotics. One promising technological path in this direction is SMA-based actuation of the type presented in [21]-[25], which exhibits high-work densities (HWD) and requires low voltages of operation-- typically, 1 to 25 V.