--We present a method for effectively planning the motion trajectory of robots in manufacturing tasks, the tool-paths of which are usually complex and have a large number of discrete time constraints as waypoints. Kinematic redundancy also exists in these robotic systems. The jerk of motion is optimized in our trajectory planning method at the meanwhile of fabrication process to improve the quality of fabrication. Our method is based on a sampling strategy and consists of two major parts. After determining an initial path by graph-search, a greedy algorithm is adopted to optimize a path by locally applying adaptive filers in the regions with large jerks. The filtered result is obtained by numerical optimization. In order to achieve efficient computation, an adaptive sampling method is developed for learning a collision-indication function that is represented as a support-vector machine. Applications in robot-assisted 3D printing are given in this paper to demonstrate the functionality of our approach. Abstract --In robot-assisted manufacturing applications, robotic arms are employed to realize the motion of workpieces (or machining tools) specified as a sequence of waypoints with the positions of tool tip and the tool orientations constrained. The required degree-of-freedom (DOF) is often less than the robotic hardware system (e.g., a robotic arm has 6-DOF). Specifically, rotations of the workpiece around the axis of a tool can be arbitrary (see Figure 1 for an example). By using this redundancy - i.e., there are many possible poses of a robotic arm to realize a given waypoint, the trajectory of robots can be optimized to consider the performance of motion in velocity, acceleration and jerk in the joint space. In addition, when fabricating complex models each tool-path can have a large amount of waypoints. It is crucial for a motion planning algorithm to compute a smooth and collision-free trajectory of robot to improve fabrication quality. The time taken by the planning algorithm should not significantly lengthen the total manufacturing time; ideally it would remain hidden as computing motions for a layer can be done while the previous layer is printing. The method presented in this paper provides an efficient framework to tackle this problem. The framework has been well tested on our robot-assisted additive manufacturing system to demonstrate its effectiveness and can be generally applied to other robot-assisted manufacturing systems.

A wide range of sustainability and grid-integration strategies depend on workload shifting, which aligns the timing of energy consumption with external signals such as grid curtailment events, carbon intensity, or time-of-use electricity prices. The main challenge lies in the online nature of the problem: operators must make real-time decisions (e.g., whether to consume energy now) without knowledge of the future. While forecasts of signal values are typically available, prior work on learning-augmented online algorithms has relied almost exclusively on simple point forecasts. In parallel, the forecasting research has made significant progress in uncertainty quantification (UQ), which provides richer and more fine-grained predictive information. In this paper, we study how online workload shifting can leverage UQ predictors to improve decision-making. We introduce $\texttt{UQ-Advice}$, a learning-augmented algorithm that systematically integrates UQ forecasts through a $\textit{decision uncertainty score}$ that measures how forecast uncertainty affects optimal future decisions. By introducing $\textit{UQ-robustness}$, a new metric that characterizes how performance degrades with forecast uncertainty, we establish theoretical performance guarantees for $\texttt{UQ-Advice}$. Finally, using trace-driven experiments on carbon intensity and electricity price data, we demonstrate that $\texttt{UQ-Advice}$ consistently outperforms robust baselines and existing learning-augmented methods that ignore uncertainty.

Group-fairness metrics (e.g., equalized odds) can vary sharply across resamples and are especially brittle under distribution shift, undermining reliable audits. We propose a Wasserstein distributionally robust framework that certifies worst-case group fairness over a ball of plausible test distributions centered at the empirical law. Our formulation unifies common group fairness notions via a generic conditional-probability functional and defines $\varepsilon$-Wasserstein Distributional Fairness ($\varepsilon$-WDF) as the audit target. Leveraging strong duality, we derive tractable reformulations and an efficient estimator (DRUNE) for $\varepsilon$-WDF. We prove feasibility and consistency and establish finite-sample certification guarantees for auditing fairness, along with quantitative bounds under smoothness and margin conditions. Across standard benchmarks and classifiers, $\varepsilon$-WDF delivers stable fairness assessments under distribution shift, providing a principled basis for auditing and certifying group fairness beyond observational data.

In modern logistics management systems, route planning requires high efficiency. The Open Capacitated Vehicle Routing Problem (OCVRP) deals with finding optimal delivery routes for a fleet of vehicles serving geographically distributed customers, without requiring the vehicles to return to the depot after deliveries. The present study is comparative in nature and speaks of two algorithms for OCVRP solution: Ant Colony Optimization (ACO), a nature-inspired metaheuristic; and Google OR-Tools, an industry-standard toolkit for optimization. Both implementations were developed in Python and using a custom dataset. Performance appraisal was based on routing efficiency, computation time, and scalability. The results show that ACO allows flexibility in routing parameters while OR-Tools runs much faster with more consistency and requires less input. This could help choose among routing strategies for scalable real-time logistics systems.

Aiming at the problem of driver's perception lag and low utilization efficiency of space-time resources in expressway ramp confluence area, based on the preemptive spatiotemporal trajectory Adjustment system, from the perspective of coordinating spatiotemporal resources, the reasonable value of safe space-time distance in trajectory pre-preparation is quantitatively analyzed. The minimum safety gap required for ramp vehicles to merge into the mainline is analyzed by introducing double positioning error and spatiotemporal trajectory tracking error. A merging control strategy for autonomous driving heterogeneous vehicles is proposed, which integrates vehicle type, driving intention, and safety spatiotemporal distance. The specific confluence strategies of ramp target vehicles and mainline cooperative vehicles under different vehicle types are systematically expounded. A variety of traffic flow and speed scenarios are used for full combination simulation. By comparing the time-position-speed diagram, the vehicle operation characteristics and the dynamic difference of confluence are qualitatively analyzed, and the average speed and average delay are used as the evaluation indices to quantitatively evaluate the performance advantages of the preemptive cooperative confluence control strategy. The results show that the maximum average delay improvement rates of mainline and ramp vehicles are 90.24 % and 74.24 %, respectively. The proposed strategy can effectively avoid potential vehicle conflicts and emergency braking behaviors, improve driving safety in the confluence area, and show significant advantages in driving stability and overall traffic efficiency optimization.

In stochastic optimal control the distribution of the exogenous noise is typically unknown and must be inferred from limited data before dynamic programming (DP)-based solution schemes can be applied. If the conditional expectations in the DP recursions are estimated via kernel regression, however, the historical sample paths enter the solution procedure directly as they determine the evaluation points of the cost-to-go functions. The resulting data-driven DP scheme is asymptotically consistent and admits efficient computational solution when combined with parametric value function approximations. If training data is sparse, however, the estimated cost-to-go functions display a high variability and an optimistic bias, while the corresponding control policies perform poorly in out-of-sample tests. To mitigate these small sample effects, we propose a robust data-driven DP scheme, which replaces the expectations in the DP recursions with worst-case expectations over a set of distributions close to the best estimate.

Variational inference algorithms provide the most effective framework for large-scale training of Bayesian nonparametric models. Stochastic online approaches are promising, but are sensitive to the chosen learning rate and often converge to poor local optima. We present a new algorithm, memoized online variational inference, which scales to very large (yet finite) datasets while avoiding the complexities of stochastic gradient. Our algorithm maintains finite-dimensional sufficient statistics from batches of the full dataset, requiring some additional memory but still scaling to millions of examples. Exploiting nested families of variational bounds for infinite nonparametric models, we develop principled birth and merge moves allowing non-local optimization.

We investigate two new optimization problems -- minimizing a submodular function subject to a submodular lower bound constraint (submodular cover) and maximizing a submodular function subject to a submodular upper bound constraint (submodular knapsack). We are motivated by a number of real-world applications in machine learning including sensor placement and data subset selection, which require maximizing a certain submodular function (like coverage or diversity) while simultaneously minimizing another (like cooperative cost). These problems are often posed as minimizing the difference between submodular functions [9, 23] which is in the worst case inapproximable. We show, however, that by phrasing these problems as constrained optimization, which is more natural for many applications, we achieve a number of bounded approximation guarantees. We also show that both these problems are closely related and, an approximation algorithm solving one can be used to obtain an approximation guarantee for the other.

Tetris is a popular video game that has been widely used as a benchmark for various optimization techniques including approximate dynamic programming (ADP) algorithms. A close look at the literature of this game shows that while ADP algorithms, that have been (almost) entirely based on approximating the value function (value function based), have performed poorly in Tetris, the methods that search directly in the space of policies by learning the policy parameters using an optimization black box, such as the cross entropy (CE) method, have achieved the best reported results. This makes us conjecture that Tetris is a game in which good policies are easier to represent, and thus, learn than their corresponding value functions. So, in order to obtain a good performance with ADP, we should use ADP algorithms that search in a policy space, instead of the more traditional ones that search in a value function space. In this paper, we put our conjecture to test by applying such an ADP algorithm, called classification-based modified policy iteration (CBMPI), to the game of Tetris. Our extensive experimental results show that for the first time an ADP algorithm, namely CBMPI, obtains the best results reported in the literature for Tetris in both small $10\times 10$ and large $10\times 20$ boards. Although the CBMPI's results are similar to those achieved by the CE method in the large board, CBMPI uses considerably fewer (almost 1/10) samples (call to the generative model of the game) than CE.

We propose an efficient discrete optimization algorithm for selecting a subset of training data to induce sparsity for Gaussian process regression. The algorithm estimates this inducing set and the hyperparameters using a single objective, either the marginal likelihood or a variational free energy. The space and time complexity are linear in the training set size, and the algorithm can be applied to large regression problems on discrete or continuous domains. Empirical evaluation shows state-of-art performance in the discrete case and competitive results in the continuous case.