INFRASTRUCTURE SENSOR-ENABLED VEHICLE DA T A GENERA TION USING MUL TI-SENSOR FUSION FOR PROACTIVE SAFETY APPLICA TIONS A T WORK ZONE Suhala Rabab Saba Department of Civil, Construction & Environmental Engineering, The University of Alabama Smart Communities and Innovation Building (SCIB), 28 Kirkbride Lane, Tuscaloosa, AL 35487-0288 Email: ssaba@crimson.ua.edu Saba, Khan, Ahmad, Cao, Rahman, Zhao, Huynh, and Ozguven 3 ABSTRACT Infrastructure-based sensing and real-time trajectory generation hold significant promise for improving safety in high-risk roadway segments like work zones, yet practical deployments are hindered by perspective distortion, complex geometry, occlusions, and costs. This study tackles these barriers by (i) integrating roadside camera and LiDAR sensors into a cosimulation environment to develop a scalable, cost-effective vehicle detection and localization framework, and (ii) employing a Kalman Filter-based late fusion strategy to enhance trajectory consistency and accuracy. In simulation, the fusion algorithm reduced longitudinal error by up to 70% compared to individual sensors while preserving lateral accuracy within 1-3 meters. Field validation in an active work zone, using LiDAR, a radar-camera rig, and RTK-GPS as ground truth, demonstrated that the fused trajectories closely match real vehicle paths, even when single-sensor data are intermittent or degraded. These results confirm that KF based sensor fusion can reliably compensate for individual sensor limitations, providing precise and robust vehicle tracking capabilities. Our approach thus offers a practical pathway to deploy infrastructure-enabled multi-sensor systems for proactive safety measures in complex traffic environments. Keywords: work zone, fusion, lidar, camera, localization, safety Saba, Khan, Ahmad, Cao, Rahman, Zhao, Huynh, and Ozguven 4 INTRODUCTION Work zone crashes do not necessarily impact only the vehicles and people directly involved; instead, they have cascading effects that cause operational delays for passing vehicles and project completion delays for work zone contractors. The Federal Motor Carrier Safety Administration (FMCSA) report indicates that commercial motor vehicles (CMVs) are involved in one-third of work zone fatal crashes, although they represent only 5% of all vehicular traffic (1). In addition, speed is a contributing factor in 26% of all fatal work zone crashes (2). According to Jiao (2022) (3), 13% of CMV drivers are fatigued when they are involved in crashes.

Best subset selection in linear regression is well known to be nonconvex and computationally challenging to solve, as the number of possible subsets grows rapidly with increasing dimensionality of the problem. As a result, finding the global optimal solution via an exact optimization method for a problem with dimensions of 1000s may take an impractical amount of CPU time. This suggests the importance of finding suboptimal procedures that can provide good approximate solutions using much less computational effort than exact methods. In this work, we introduce a new procedure and compare it with other popular suboptimal algorithms to solve the best subset selection problem. Extensive computational experiments using synthetic and real data have been performed. The results provide insights into the performance of these methods in different data settings. The new procedure is observed to be a competitive suboptimal algorithm for solving the best subset selection problem for high-dimensional data.

This paper presents an implementation and analysis of a five-fingered robotic grasping system that combines contact-based control with inverse kinematics solutions. Using the PyBullet simulation environment and the DexHand v2 model, we demonstrate a comprehensive approach to achieving stable grasps through contact point optimization with force closure validation. Our method achieves movement efficiency ratings between 0.966-0.996 for non-thumb fingers and 0.879 for the thumb, while maintaining positional accuracy within 0.0267-0.0283m for non-thumb digits and 0.0519m for the thumb. The system demonstrates rapid position stabilization at 240Hz simulation frequency and maintains stable contact configurations throughout the grasp execution. Experimental results validate the effectiveness of our approach, while also identifying areas for future enhancement in thumb opposition movements and horizontal plane control.

A key consideration when training an LLM is whether the target language is more or less resourced, whether this is English compared to Welsh, or Python compared to Excel. Typical training data for programming languages consist of real program demonstrations coupled with human-written comments. Here we present novel approaches to the creation of such data for low resource programming languages. We generate fully-synthetic, textbook-quality demonstrations of common library functions in an example domain of Excel formulas, using a teacher model. We then finetune an underperforming student model, and show improvement on 2 question-answering datasets recast into the Excel domain. We show advantages of finetuning over standard, off-the-shelf RAG approaches, which can offer only modest improvement due to the unfamiliar target domain.

Object affordance and volumetric information are essential in devising effective grasping strategies under task-specific constraints. This paper presents an approach for inferring suitable grasping strategies from limited partial views of an object. To achieve this, a recurrent generative adversarial network (R-GAN) was proposed by incorporating a recurrent generator with long short-term memory (LSTM) units for it to process a variable number of depth scans. To determine object affordances, the AffordPose knowledge dataset is utilized as prior knowledge. Affordance retrieving is defined by the volume similarity measured via Chamfer Distance and action similarities. A Proximal Policy Optimization (PPO) reinforcement learning model is further implemented to refine the retrieved grasp strategies for task-oriented grasping. The retrieved grasp strategies were evaluated on a dual-arm mobile manipulation robot with an overall grasping accuracy of 89% for four tasks: lift, handle grasp, wrap grasp, and press.

The transition towards patient-centric healthcare necessitates a comprehensive understanding of patient journeys, which encompass all healthcare experiences and interactions across the care spectrum. Existing healthcare data systems are often fragmented and lack a holistic representation of patient trajectories, creating challenges for coordinated care and personalized interventions. Patient Journey Knowledge Graphs (PJKGs) represent a novel approach to addressing the challenge of fragmented healthcare data by integrating diverse patient information into a unified, structured representation. This paper presents a methodology for constructing PJKGs using Large Language Models (LLMs) to process and structure both formal clinical documentation and unstructured patient-provider conversations. These graphs encapsulate temporal and causal relationships among clinical encounters, diagnoses, treatments, and outcomes, enabling advanced temporal reasoning and personalized care insights. The research evaluates four different LLMs, such as Claude 3.5, Mistral, Llama 3.1, and Chatgpt4o, in their ability to generate accurate and computationally efficient knowledge graphs. Results demonstrate that while all models achieved perfect structural compliance, they exhibited variations in medical entity processing and computational efficiency. The paper concludes by identifying key challenges and future research directions. This work contributes to advancing patient-centric healthcare through the development of comprehensive, actionable knowledge graphs that support improved care coordination and outcome prediction.

The advancement of smart grid technologies necessitates the integration of cutting-edge computational methods to enhance predictive energy optimization. This study proposes a multi-faceted approach by incorporating (1) Deep Reinforcement Learning (DRL) agents trained using data from Digital Twins (DTs) to optimize energy consumption in real time, (2) Physics-Informed Neural Networks (PINNs) to seamlessly embed physical laws within the optimization process, ensuring model accuracy and interpretability, and (3) Blockchain (BC) technology to facilitate secure and transparent communication across the smart grid infrastructure. The model was trained and validated using comprehensive datasets, including smart meter energy consumption data, renewable energy outputs, dynamic pricing, and user preferences collected from IoT devices. The proposed framework achieved superior predictive performance with a Mean Absolute Error (MAE) of 0.237 kWh, Root Mean Square Error (RMSE) of 0.298 kWh, and an R-squared (R2) value of 0.978, indicating a 97.8% explanation of data variance. Classification metrics further demonstrated the model's robustness, achieving 97.7% accuracy, 97.8% precision, 97.6% recall, and an F1 Score of 97.7%. Comparative analysis with traditional models like Linear Regression, Random Forest, SVM, LSTM, and XGBoost revealed the superior accuracy and real-time adaptability of the proposed method. In addition to enhancing energy efficiency, the model reduced energy costs by 35%, maintained a 96% user comfort index, and increased renewable energy utilization to 40%. This study demonstrates the transformative potential of integrating PINNs, DT, and Blockchain technologies to optimize energy consumption in smart grids, paving the way for sustainable, secure, and efficient energy management systems.

Large language models (LLMs) have demonstrated immense capabilities in understanding textual data and are increasingly being adopted to help researchers accelerate scientific discovery through knowledge extraction (information retrieval), knowledge distillation (summarizing key findings and methodologies into concise forms), and knowledge synthesis (aggregating information from multiple scientific sources to address complex queries, generate hypothesis and formulate experimental plans). However, scientific data often exists in both visual and textual modalities. Vision language models (VLMs) address this by incorporating a pretrained vision backbone for processing images and a cross-modal projector that adapts image tokens into the LLM dimensional space, thereby providing richer multimodal comprehension. Nevertheless, off-the-shelf VLMs show limited capabilities in handling domain-specific data and are prone to hallucinations. We developed intelligent assistants finetuned from LLaVA models to enhance multimodal understanding in low-dose radiation therapy (LDRT)-a benign approach used in the treatment of cancer-related illnesses. Using multilingual data from 42,673 articles, we devise complex reasoning and detailed description tasks for visual question answering (VQA) benchmarks. Our assistants, trained on 50,882 image-text pairs, demonstrate superior performance over base models as evaluated using LLM-as-a-judge approach, particularly in reducing hallucination and improving domain-specific comprehension.

We investigate the flavour sector of the supersymmetric $SU(5)$ Grand Unified Theory (GUT) model using machine learning techniques. The minimal $SU(5)$ model is known to predict fermion masses that disagree with observed values in nature. There are two well-known approaches to address this issue: one involves introducing a 45-representation Higgs field, while the other employs a higher-dimensional operator involving the 24-representation GUT Higgs field. We compare these two approaches by numerically optimising a loss function, defined as the ratio of determinants of mass matrices. Our findings indicate that the 24-Higgs approach achieves the observed fermion masses with smaller modifications to the original minimal $SU(5)$ model.

Extracting anomaly causality facilitates diagnostics once monitoring systems detect system faults. Identifying anomaly causes in large systems involves investigating a more extensive set of monitoring variables across multiple subsystems. However, learning causal graphs comes with a significant computational burden that restrains the applicability of most existing methods in real-time and large-scale deployments. In addition, modern monitoring applications for large systems often generate large amounts of binary alarm flags, and the distinct characteristics of binary anomaly data -- the meaning of state transition and data sparsity -- challenge existing causality learning mechanisms. This study proposes an anomaly causal discovery approach (AnomalyCD), addressing the accuracy and computational challenges of generating causal graphs from binary flag data sets. The AnomalyCD framework presents several strategies, such as anomaly flag characteristics incorporating causality testing, sparse data and link compression, and edge pruning adjustment approaches. We validate the performance of this framework on two datasets: monitoring sensor data of the readout-box system of the Compact Muon Solenoid experiment at CERN, and a public data set for information technology monitoring. The results demonstrate the considerable reduction of the computation overhead and moderate enhancement of the accuracy of temporal causal discovery on binary anomaly data sets.