This study considers multiple reconfigurable intelligent surfaces (RISs)-aided multiuser downlink systems with the goal of jointly optimizing the transmitter precoding and RIS phase shift matrix to maximize spectrum efficiency. Unlike prior work that assumed ideal RIS reflectivity, a practical coupling effect is considered between reflecting amplitude and phase shift for the RIS elements. This makes the optimization problem non-convex. To address this challenge, we propose a deep deterministic policy gradient (DDPG)-based deep reinforcement learning (DRL) framework. The proposed model is evaluated under both fixed and random numbers of users in practical mmWave channel settings. Simulation results demonstrate that, despite its complexity, the proposed DDPG approach significantly outperforms optimization-based algorithms and double deep Q-learning, particularly in scenarios with random user distributions.

--Optimizing discrete phase shifts in large-scale recon-figurable intelligent surfaces (RISs) is challenging due to their non-convex and non-linear nature. In this letter, we propose a heuristic-integrated deep reinforcement learning (DRL) framework that (1) leverages accumulated actions over multiple steps in the double deep Q-network (DDQN) for RIS column-wise control and (2) integrates a greedy algorithm (GA) into each DRL step to refine the state via fine-grained, element-wise optimization of RIS configurations. By learning from GA-included states, the proposed approach effectively addresses RIS optimization within a small DRL action space, demonstrating its capability to optimize phase-shift configurations of large-scale RISs. ECONFIGURABLE intelligent surface (RIS) is a promising technology for 6G networks by enabling intelligent adaptivity of the wireless propagation environment. Typically, an RIS consists of numerous unit cells, the phase shift configuration of which plays a crucial role in enhancing the system performance of RIS-assisted networks, including data rate, energy efficiency, channel capacity, etc. [1].

--This paper explores the design of beamforming codebooks for the base station (BS) and for the reconfigurable intelligent surfaces (RISs) in an active sensing scheme for uplink localization, in which the mobile user transmits a sequence of pilots to the BS through reflection at the RISs, and the BS and the RISs are adaptively configured by carefully choosing BS beamforming codeword and RIS codewords from their respective codebooks in a sequential manner to progressively focus onto the user . Most existing codebook designs for RIS are not tailored for active sensing, by which we mean the choice of the next codeword should depend on the measurements made so far, and the sequence of codewords should dynamically focus reflection toward the user . Moreover, most existing codeword selection methods rely on exhaustive search in beam training to identify the codeword with the highest signal-to-noise ratio (SNR), thus incurring substantial pilot overhead as the size of the codebook scales. This paper proposes a learning-based approach for codebook construction and for codeword selection for active sensing. The proposed learning approach aims to locate a target in the service area by recursively selecting a sequence of BS beamforming codewords and RIS codewords from the respective codebooks as more measurements become available without exhaustive beam training. The codebook design and the codeword selection fuse key ideas from the vector quantized variational autoencoder (VQ-V AE) and the long short-term memory (LSTM) network to learn respectively the discrete function space of the codebook and the temporal dependencies between measurements. The device is typically placed in the reflecting path between the transceivers, with its configuration wirelessly controlled by the transceivers via a control link. Manuscript submitted to IEEE Transactions on Wireless Communications on September 6, 2024, revised on January 12, 2025, accepted on March 5, 2025. Wei Y u is with The Edward S. Rogers Sr. This work is supported by the Natural Sciences and Engineering Research Council of Canada via the Canada Research Chairs program. The materials in this paper have been accepted in part at the IEEE Workshop on Signal Processing Advances in Wireless Communications (SP A WC), Lucca, Italy, September 2024 [1]. Codebook-based limited control link rate protocol can substantially reduce the control overhead [7], [8]. With the RIS codebook stored at the controller and at the RIS, the controller only needs to send the codeword index in order to configure the RIS.

In this paper, we study the problem of promptly detecting the presence of non-cooperative activity from one or more Reconfigurable Intelligent Surfaces (RISs) with unknown characteristics lying in the vicinity of a Multiple-Input Multiple-Output (MIMO) communication system using Orthogonal Frequency-Division Multiplexing (OFDM) transmissions. We first present a novel wideband channel model incorporating RISs as well as non-reconfigurable stationary surfaces, which captures both the effect of the RIS actuation time on the channel in the frequency domain as well as the difference between changing phase configurations during or among transmissions. Considering that RISs may operate under the coordination of a third-party system, and thus, may negatively impact the communication of the intended MIMO OFDM system, we present a novel RIS activity detection framework that is unaware of the distribution of the phase configuration of any of the non-cooperative RISs. In particular, capitalizing on the knowledge of the data distribution at the multi-antenna receiver, we design a novel online change point detection statistic that combines a deep support vector data description model with the scan $B$-test. The presented numerical investigations demonstrate the improved detection accuracy as well as decreased computational complexity of the proposed RIS detection approach over existing change point detection schemes.

This paper aims to simultaneously optimize indoor wireless and daylight performance by adjusting the positions of windows and the beam directions of window-deployed reconfigurable intelligent surfaces (RISs) for RIS-aided outdoor-to-indoor (O2I) networks utilizing large language models (LLM) as optimizers. Firstly, we illustrate the wireless and daylight system models of RIS-aided O2I networks and formulate a joint optimization problem to enhance both wireless traffic sum rate and daylight illumination performance. Then, we present a multi-modal LLM-based window optimization (LMWO) framework, accompanied by a prompt construction template to optimize the overall performance in a zero-shot fashion, functioning as both an architect and a wireless network planner. Finally, we analyze the optimization performance of the LMWO framework and the impact of the number of windows, room size, number of RIS units, and daylight factor. Numerical results demonstrate that our proposed LMWO framework can achieve outstanding optimization performance in terms of initial performance, convergence speed, final outcomes, and time complexity, compared with classic optimization methods. The building's wireless performance can be significantly enhanced while ensuring indoor daylight performance.

This paper addresses an uplink localization problem in which a base station (BS) aims to locate a remote user with the help of reconfigurable intelligent surfaces (RISs). We propose a strategy in which the user transmits pilots sequentially and the BS adaptively adjusts the sensing vectors, including the BS beamforming vector and multiple RIS reflection coefficients based on the observations already made, to eventually produce an estimated user position. This is a challenging active sensing problem for which finding an optimal solution involves searching through a complicated functional space whose dimension increases with the number of measurements. We show that the long short-term memory (LSTM) network can be used to exploit the latent temporal correlation between measurements to automatically construct scalable state vectors. Subsequently, the state vector is mapped to the sensing vectors for the next time frame via a deep neural network (DNN). A final DNN is used to map the state vector to the estimated user position. Numerical result illustrates the advantage of the active sensing design as compared to non-active sensing methods. The proposed solution produces interpretable results and is generalizable in the number of sensing stages. Remarkably, we show that a network with one BS and multiple RISs can outperform a comparable setting with multiple BSs.

Semantic communication has gained significant attention recently due to its advantages in achieving higher transmission efficiency by focusing on semantic information instead of bit-level information. However, current AI-based semantic communication methods require digital hardware for implementation. With the rapid advancement on reconfigurable intelligence surfaces (RISs), a new approach called on-the-air diffractional deep neural networks (D$^2$NN) can be utilized to enable semantic communications on the wave domain. This paper proposes a new paradigm of RIS-based on-the-air semantic communications, where the computational process occurs inherently as wireless signals pass through RISs. We present the system model and discuss the data and control flows of this scheme, followed by a performance analysis using image transmission as an example. In comparison to traditional hardware-based approaches, RIS-based semantic communications offer appealing features, such as light-speed computation, low computational power requirements, and the ability to handle multiple tasks simultaneously.

In this paper, we study the problem of joint active and passive beamforming for reconfigurable intelligent surface (RIS)-assisted massive multiple-input multiple-output systems towards the extension of the wireless cellular coverage in 3D, where multiple RISs, each equipped with an array of passive elements, are deployed to assist a base station (BS) to simultaneously serve multiple unmanned aerial vehicles (UAVs) in the same time-frequency resource of 5G wireless communications. With a focus on ensuring fairness among UAVs, our objective is to maximize the minimum signal-to-interference-plus-noise ratio (SINR) at UAVs by jointly optimizing the transmit beamforming parameters at the BS and phase shift parameters at RISs. We propose two novel algorithms to address this problem. The first algorithm aims to mitigate interference by calculating the BS beamforming matrix through matrix inverse operations once the phase shift parameters are determined. The second one is based on the principle that one RIS element only serves one UAV and the phase shift parameter of this RIS element is optimally designed to compensate the phase offset caused by the propagation and fading. To obtain the optimal parameters, we utilize one state-of-the-art reinforcement learning algorithm, deep deterministic policy gradient, to solve these two optimization problems. Simulation results are provided to illustrate the effectiveness of our proposed solution and some insightful remarks are observed.

The advent of reconfigurable intelligent surfaces(RISs) brings along significant improvements for wireless technology on the verge of beyond-fifth-generation networks (B5G).The proven flexibility in influencing the propagation environment opens up the possibility of programmatically altering the wireless channel to the advantage of network designers, enabling the exploitation of higher-frequency bands for superior throughput overcoming the challenging electromagnetic (EM) propagation properties at these frequency bands. However, RISs are not magic bullets. Their employment comes with significant complexity, requiring ad-hoc deployments and management operations to come to fruition. In this paper, we tackle the open problem of bringing RISs to the field, focusing on areas with little or no coverage. In fact, we present a first-of-its-kind deep reinforcement learning (DRL) solution, dubbed as D-RISA, which trains a DRL agent and, in turn, obtain san optimal RIS deployment. We validate our framework in the indoor scenario of the Rennes railway station in France, assessing the performance of our algorithm against state-of-the-art (SOA) approaches. Our benchmarks showcase better coverage, i.e., 10-dB increase in minimum signal-to-noise ratio (SNR), at lower computational time (up to -25 percent) while improving scalability towards denser network deployments.

This paper puts forth a new, reconfigurable intelligent surface (RIS)-assisted, uplink, user-centric cell-free (UCCF) system managed with the assistance of a digital twin (DT). Specifically, we propose a novel learning framework that maximizes the sum-rate by jointly optimizing the access point and user association (AUA), power control, and RIS beamforming. This problem is challenging and has never been addressed due to its prohibitively large and complex solution space. Our framework decouples the AUA from the power control and RIS beamforming (PCRB) based on the different natures of their variables, hence reducing the solution space. A new position-adaptive binary particle swarm optimization (PABPSO) method is designed for the AUA. Two twin-delayed deep deterministic policy gradient (TD3) models with new and refined state pre-processing layers are developed for the PCRB. Another important aspect is that a DT is leveraged to train the learning framework with its replay of channel estimates stored. The AUA, power control, and RIS beamforming are only tested in the physical environment at the end of selected epochs. Simulations show that using RISs contributes to considerable increases in the sum-rate of UCCF systems, and the DT dramatically reduces overhead with marginal performance loss. The proposed framework is superior to its alternatives in terms of sum-rate and convergence stability. Y. Cui and T. Lv are with the School of Information and Communication Engineering, Beijing University of Posts and Telecommunications (BUPT), Beijing 100876, China (e-mail: {cuiyingping, lvtiejun,}@bupt.edu.cn).