Abstract-- Robotic pollination offers a promising alternative to manual labor and bumblebee-assisted methods in controlled agriculture, where wind-driven pollination is absent and regulatory restrictions limit the use of commercial pollinators. In this work, we present and validate a vision-guided robotic framework that uses data from an end-effector mounted RGB-D sensor and combines 3D plant reconstruction, targeted grasp planning, and physics-based vibration modeling to enable precise pollination. First, the plant is reconstructed in 3D and registered to the robot coordinate frame to identify obstacle-free grasp poses along the main stem. Second, a discrete elastic rod model predicts the relationship between actuation parameters and flower dynamics, guiding the selection of optimal pollination strategies. Finally, a manipulator with soft grippers grasps the stem and applies controlled vibrations to induce pollen release. End-to-end experiments demonstrate a 92.5% main-stem grasping success rate, and simulation-guided optimization of vibration parameters further validates the feasibility of our approach, ensuring that the robot can safely and effectively perform pollination without damaging the flower . T o our knowledge, this is the first robotic system to jointly integrate vision-based grasping and vibration modeling for automated precision pollination.

-- The small scale of urban farms and the commercial availability of low-cost robots (such as the FarmBot) that automate simple tending tasks enable an accessible platform for plant phenotyping. We have used a FarmBot with a custom camera end-effector to estimate strawberry plant flower pose (for robotic pollination) from acquired 3D point cloud models. We describe a novel algorithm that translates individual occupancy grids along orthogonal axes of a point cloud to obtain 2D images corresponding to the six viewpoints. For each image, 2D object detection models for flowers are used to identify 2D bounding boxes which can be converted into the 3D space to extract flower point clouds. Pose estimation is performed by fitting three shapes (superellipsoids, paraboloids and planes) to the flower point clouds and compared with manually labeled ground truth. Our method successfully finds approximately 80% of flowers scanned using our customized FarmBot platform and has a mean flower pose error of 7.7 degrees, which is sufficient for robotic pollination and rivals previous results. Urban farms [1] provide healthy food to local communities and can serve as platforms for education and sustainability.

-- Monitoring flowers over time is essential for precision robotic pollination in agriculture. T o accomplish this, a continuous spatial-temporal observation of plant growth can be done using stationary RGB-D cameras. However, image registration becomes a serious challenge due to changes in the visual appearance of the plant caused by the pollination process and occlusions from growth and camera angles. Plants flower in a manner that produces distinct clusters on branches. This paper presents a method for matching flower clusters using descriptors generated from RGB-D data and considers allowing for spatial uncertainty within the cluster . The proposed approach leverages the Unscented Transform to efficiently estimate plant descriptor uncertainty tolerances, enabling a robust image-registration process despite temporal changes. The Unscented Transform is used to handle the nonlinear transformations by propagating the uncertainty of flower positions to determine the variations in the descriptor domain. A Monte Carlo simulation is used to validate the Unscented Transform results, confirming our method's effectiveness for flower cluster matching. Therefore, it can facilitate improved robotics pollination in dynamic environments. Although global agriculture relies heavily on pollination, evidence has shown that the population of natural pollinators is decreasing, raising concerns about food and the economy [1].

This study presents Flower Pose Estimation (FloPE), a real-time flower pose estimation framework for computationally constrained robotic pollination systems. Robotic pollination has been proposed to supplement natural pollination to ensure global food security due to the decreased population of natural pollinators. However, flower pose estimation for pollination is challenging due to natural variability, flower clusters, and high accuracy demands due to the flowers' fragility when pollinating. This method leverages 3D Gaussian Splatting to generate photorealistic synthetic datasets with precise pose annotations, enabling effective knowledge distillation from a high-capacity teacher model to a lightweight student model for efficient inference. The approach was evaluated on both single and multi-arm robotic platforms, achieving a mean pose estimation error of 0.6 cm and 19.14 degrees within a low computational cost. Our experiments validate the effectiveness of FloPE, achieving up to 78.75% pollination success rate and outperforming prior robotic pollination techniques.

Cocoa is a multi-billion-dollar industry but research on improving yields through pollination remains limited. New embedded hardware and AI-based data analysis is advancing information on cocoa flower visitors, their identity and implications for yields. We present the first cocoa flower visitor dataset containing 5,792 images of Ceratopogonidae, Formicidae, Aphididae, Araneae, and Encyrtidae, and 1,082 background cocoa flower images. This dataset was curated from 23 million images collected over two years by embedded cameras in cocoa plantations in Hainan province, China. We exemplify the use of the dataset with different sizes of YOLOv8 models and by progressively increasing the background image ratio in the training set to identify the best-performing model. The medium-sized YOLOv8 model achieved the best results with 8% background images (F1 Score of 0.71, mAP50 of 0.70). Overall, this dataset is useful to compare the performance of deep learning model architectures on images with low contrast images and difficult detection targets. The data can support future efforts to advance sustainable cocoa production through pollination monitoring projects.

The decline of bee and wind-based pollination systems in greenhouses due to controlled environments and limited access has boost the importance of finding alternative pollination methods. Robotic based pollination systems have emerged as a promising solution, ensuring adequate crop yield even in challenging pollination scenarios. This paper presents a comprehensive review of the current robotic-based pollinators employed in greenhouses. The review categorizes pollinator technologies into major categories such as air-jet, water-jet, linear actuator, ultrasonic wave, and air-liquid spray, each suitable for specific crop pollination requirements. However, these technologies are often tailored to particular crops, limiting their versatility. The advancement of science and technology has led to the integration of automated pollination technology, encompassing information technology, automatic perception, detection, control, and operation. This integration not only reduces labor costs but also fosters the ongoing progress of modern agriculture by refining technology, enhancing automation, and promoting intelligence in agricultural practices. Finally, the challenges encountered in design of pollinator are addressed, and a forward-looking perspective is taken towards future developments, aiming to contribute to the sustainable advancement of this technology.

When performing complex multi-step reasoning tasks, the ability of Large Language Models (LLMs) to derive structured intermediate proof steps is important for ensuring that the models truly perform the desired reasoning and for improving models' explainability. This paper is centred around a focused study: whether the current state-of-the-art generalist LLMs can leverage the structures in a few examples to better construct the proof structures with \textit{in-context learning}. Our study specifically focuses on structure-aware demonstration and structure-aware pruning. We demonstrate that they both help improve performance. A detailed analysis is provided to help understand the results.

Global food production depends upon successful pollination, a process that relies on natural and managed pollinators. However, natural pollinators are declining due to different factors, including climate change, habitat loss, and pesticide use. Thus, developing alternative pollination methods is essential for sustainable crop production. This paper introduces a robotic system for precision pollination in apples, which are not self-pollinating and require precise delivery of pollen to the stigmatic surfaces of the flowers. The proposed robotic system consists of a machine vision system to identify target flowers and a mechatronic system with a 6-DOF UR5e robotic manipulator and an electrostatic sprayer. Field trials of this system in 'Honeycrisp' and 'Fuji' apple orchards have shown promising results, with the ability to pollinate flower clusters at an average spray cycle time of 6.5 seconds. The robotic pollination system has achieved encouraging fruit set and quality, comparable to naturally pollinated fruits in terms of color, weight, diameter, firmness, soluble solids, and starch content. However, the results for fruit set and quality varied between different apple cultivars and pollen concentrations. This study demonstrates the potential for a robotic artificial pollination system to be an efficient and sustainable method for commercial apple production. Further research is needed to refine the system and assess its suitability across diverse orchard environments and apple cultivars.

Effective pollination is a key challenge for indoor farming, since bees struggle to navigate without the sun. While a variety of robotic system solutions have been proposed, it remains difficult to autonomously check that a flower has been sufficiently pollinated to produce high-quality fruit, which is especially critical for self-pollinating crops such as strawberries. To this end, this work proposes a novel robotic system for indoor farming. The proposed hardware combines a 7-degree-of-freedom (DOF) manipulator arm with a custom end-effector, comprised of an endoscope camera, a 2-DOF microscope subsystem, and a custom vibrating pollination tool; this is paired with algorithms to detect and estimate the pose of strawberry flowers, navigate to each flower, pollinate using the tool, and inspect with the microscope. The key novelty is vibrating the flower from below while simultaneously inspecting with a microscope from above. Each subsystem is validated via extensive experiments.

This paper introduces Fusion Intelligence (FI), a bio-inspired intelligent system, where the innate sensing, intelligence and unique actuation abilities of biological organisms such as bees and ants are integrated with the computational power of Artificial Intelligence (AI). This interdisciplinary field seeks to create systems that are not only smart but also adaptive and responsive in ways that mimic the nature. As FI evolves, it holds the promise of revolutionizing the way we approach complex problems, leveraging the best of both biological and digital worlds to create solutions that are more effective, sustainable, and harmonious with the environment. We demonstrate FI's potential to enhance agricultural IoT system performance through a simulated case study on improving insect pollination efficacy (entomophily).