This paper presents environment-adaptive pinch-lifting built on a slot-constrained adaptive linkage (SCAL) and instantiated in two complementary fingers: SCAL-R, a rotational-drive design with an active fingertip that folds inward after contact to form an envelope, and SCAL-L, a linear-drive design that passively opens on contact to span wide or weak-feature objects. Both fingers convert surface following into an upward lifting branch while maintaining fingertip orientation, enabling thin or low-profile targets to be raised from supports with minimal sensing and control. Two-finger grippers are fabricated via PLA-based 3D printing. Experiments evaluate (i) contact-preserving sliding and pinch-lifting on tabletops, (ii) ramp negotiation followed by lift, and (iii) handling of bulky objects via active enveloping (SCAL-R) or contact-triggered passive opening (SCAL-L). Across dozens of trials on small parts, boxes, jars, and tape rolls, both designs achieve consistent grasps with limited tuning. A quasi-static analysis provides closed-form fingertip-force models for linear parallel pinching and two-point enveloping, offering geometry-aware guidance for design and operation. Overall, the results indicate complementary operating regimes and a practical path to robust, environment-adaptive grasping with simple actuation.

Abstract-- This paper introduces an anthropomorphic robot hand built entirely using LEGO MINDSTORMS: the Educational SoftHand-A, a tendon-driven, highly-underactuated robot hand based on the Pisa/IIT SoftHand and related hands. T o be suitable for an educational context, the design is constrained to use only standard LEGO pieces with tests using common equipment available at home. The hand features dual motors driving an agonist/antagonist opposing pair of tendons on each finger, which are shown to result in reactive fine control. The finger motions are synchonized through soft synergies, implemented with a differential mechanism using clutch gears. Altogether, this design results in an anthropomorphic hand that can adaptively grasp a broad range of objects using a simple actuation and control mechanism. Since the hand can be constructed from LEGO pieces and uses state-of-the-art design concepts for robotic hands, it has the potential to educate and inspire children to learn about the frontiers of modern robotics.

CYJ Hand-0 is a 21-DOF humanoid dexterous hand featuring a hybrid tendon-driven actuation system that combines shape memory alloys (SMAs) and DC motors. The hand employs high-strength fishing line as artificial tendons and uses a fully 3D-printed AlSi10Mg metal frame designed to replicate the skeletal and tendon-muscle structure of the human hand. A linear motor-driven module controls finger flexion, while an SMA-based module enables finger extension and lateral abduction. These modules are integrated into a compact hybrid actuation unit mounted on a custom rear support structure. Mechanical and kinematic experiments, conducted under an Arduino Mega 2560-based control system, validate the effectiveness of the design and demonstrate its biomimetic dexterity.

We present a novel under-actuated gripper with two 3-joint fingers, which realizes force feedback control by the deep learning technique- Long Short-Term Memory (LSTM) model, without any force sensor. First, a five-linkage mechanism stacked by double four-linkages is designed as a finger to automatically achieve the transformation between parallel and enveloping grasping modes. This enables the creation of a low-cost under-actuated gripper comprising a single actuator and two 3-phalange fingers. Second, we devise theoretical models of kinematics and power transmission based on the proposed gripper, accurately obtaining fingertip positions and contact forces. Through coupling and decoupling of five-linkage mechanisms, the proposed gripper offers the expected capabilities of grasping payload/force/stability and objects with large dimension ranges. Third, to realize the force control, an LSTM model is proposed to determine the grasping mode for synthesizing force-feedback control policies that exploit contact sensing after outlining the uncertainty of currents using a statistical method. Finally, a series of experiments are implemented to measure quantitative indicators, such as the payload, grasping force, force sensing, grasping stability and the dimension ranges of objects to be grasped. Additionally, the grasping performance of the proposed gripper is verified experimentally to guarantee the high versatility and robustness of the proposed gripper.

Robotic grippers are the end effector in the robot system of handling any task which used for performing various operations for the purpose of industrial application and hazardous tasks.In this paper, we developed the mathematical model for multi fingers robotics grippers. we are concerned with Jamia'shand which is developed in Robotics Lab, Mechanical Engineering Deptt, Faculty of Engg & Technolgy, Jamia Millia Islamia, India. This is a tendon-driven gripper each finger having three DOF having a total of 11 DOF. The term tendon is widely used to imply belts, cables, or similar types of applications. It is made up of three fingers and a thumb. Every finger and thumb has one degree of freedom. The power transmission mechanism is a rope and pulley system. Both hands have similar structures. Aluminum from the 5083 families was used to make this product. The gripping force can be adjusted we have done the kinematics, force, and dynamic analysis by developing a Mathematical model for the four-finger robotics grippers and their thumb. we focused it control motions in X and Y Displacements with the angular positions movements and we make the force analysis of the four fingers and thumb calculate the maximum weight, force, and torque required to move it with mass. Draw the force -displacements graph which shows the linear behavior up to 250 N and shows nonlinear behavior beyond this. and required Dmin of wire is 0.86 mm for grasping the maximum 1 kg load also developed the dynamic model (using energy )approach lagrangian method to find it torque required to move the fingers.

Caves and lava tubes on the Moon and Mars are sites of geological and astrobiological interest but consist of terrain that is inaccessible with traditional robot locomotion. To support the exploration of these sites, we present ReachBot, a robot that uses extendable booms as appendages to manipulate itself with respect to irregular rock surfaces. The booms terminate in grippers equipped with microspines and provide ReachBot with a large workspace, allowing it to achieve force closure in enclosed spaces such as the walls of a lava tube. To propel ReachBot, we present a contact-before-motion planner for non-gaited legged locomotion that utilizes internal force control, similar to a multi-fingered hand, to keep its long, slender booms in tension. Motion planning also depends on finding and executing secure grips on rock features. We use a Monte Carlo simulation to inform gripper design and predict grasp strength and variability. Additionally, we use a two-step perception system to identify possible grasp locations. To validate our approach and mechanisms under realistic conditions, we deployed a single ReachBot arm and gripper in a lava tube in the Mojave Desert. The field test confirmed that ReachBot will find many targets for secure grasps with the proposed kinematic design.

Compared to fully-actuated robotic end-effectors, underactuated ones are generally more adaptive, robust, and cost-effective. However, state estimation for underactuated hands is usually more challenging. Vision-based tactile sensors, like Gelsight, can mitigate this issue by providing high-resolution tactile sensing and accurate proprioceptive sensing. As such, we present GelLink, a compact, underactuated, linkage-driven robotic finger with low-cost, high-resolution vision-based tactile sensing and proprioceptive sensing capabilities. In order to reduce the amount of embedded hardware, i.e. the cameras and motors, we optimize the linkage transmission with a planar linkage mechanism simulator and develop a planar reflection simulator to simplify the tactile sensing hardware. As a result, GelLink only requires one motor to actuate the three phalanges, and one camera to capture tactile signals along the entire finger. Overall, GelLink is a compact robotic finger that shows adaptability and robustness when performing grasping tasks. The integration of vision-based tactile sensors can significantly enhance the capabilities of underactuated fingers and potentially broaden their future usage.

This paper introduces the BRL/Pisa/IIT (BPI) SoftHand: a single actuator-driven, low-cost, 3D-printed, tendon-driven, underactuated robot hand that can be used to perform a range of grasping tasks. Based on the adaptive synergies of the Pisa/IIT SoftHand, we design a new joint system and tendon routing to facilitate the inclusion of both soft and adaptive synergies, which helps us balance durability, affordability and grasping performance of the hand. The focus of this work is on the design, simulation, synergies and grasping tests of this SoftHand. The novel phalanges are designed and printed based on linkages, gear pairs and geometric restraint mechanisms, and can be applied to most tendon-driven robotic hands. We show that the robot hand can successfully grasp and lift various target objects and adapt to hold complex geometric shapes, reflecting the successful adoption of the soft and adaptive synergies. We intend to open-source the design of the hand so that it can be built cheaply on a home 3D-printer. For more detail: https://sites.google.com/view/bpi-softhandtactile-group-bri/brlpisaiit-softhand-design