Technology Engineering How does 3D printing work? Rapid prototyping is a relatively simple process that can be scaled up or down. Breakthroughs, discoveries, and DIY tips sent every weekday. Since 3D printers debuted in the 1980s, the devices have been used to build meat, chocolate, human organs, clothing, cars, and houses . It's more mainstream than ever, and you can buy a machine for less than $200.

Abstract--Correct identification of failure mechanisms is essential for manufacturers to ensure the quality of their products. Certain failures of printheads developed by Canon Production Printing can be identified from the behavior of individual nozzles, the states of which are constantly recorded and can form distinct patterns in terms of the number of failed nozzles over time, and in space in the nozzle grid. In our work, we investigate the problem of printhead failure classification based on a multifaceted dataset of nozzle logging and propose a Machine Learning classification approach for this problem. We follow the feature-based framework of time-series classification, where a set of time-based and spatial features was selected with the guidance of domain experts. Several traditional ML classifiers were evaluated, and the One-vs-Rest Random Forest was found to have the best performance. The proposed model outperformed an in-house rule-based baseline in terms of a weighted F1 score for several failure mechanisms. Identifying failure mechanisms is a critical part of industrial corrective maintenance for manufacturers to ensure the quality of their products [1].

Automatic Section Control (ASC) is a long-standing trend for spraying in agriculture. It promises to minimise spray overlap areas. The core idea is to (i) switch off spray nozzles on areas that have already been sprayed, and (ii) to dynamically adjust nozzle flow rates along the boom bar that holds the spray nozzles when velocities of boom sections vary during turn maneuvers. ASC is not possible without sensors for accurate positioning data. Spraying and the movement of modern wide boom bars are highly dynamic processes. In addition, many uncertainty factors have an effect such as cross wind drift, nozzle clogging in open-field conditions, etc. In view of this complexity, the natural question arises if a simpler alternative exist. Therefore, ASC is compared to a proposed simpler one- or two-sections alternative that uses predictive spray switching. The comparison is provided under nominal conditions. Agricultural spraying is intrinsically linked to area coverage path planning and spray switching logic. Combinations of two area coverage path planning and switching logics as well as 3 sections-setups are compared. The three sections-setups differ by controlling 48 sections, 2 sections or controlling all nozzles uniformly with the same control signal as one single section. Methods are evaluated on 10 diverse real-world field examples, including non-convex field contours, freeform mainfield lanes and multiple obstacle areas. An economic cost analysis is provided to compare the methods. A preferred method is suggested that (i) minimises area coverage pathlength, (ii) offers intermediate overlap, (iii) is suitable for manual driving by following a pre-planned predictive spray switching logic for an area coverage path plan, and (iv) and in contrast to ASC can be implemented sensor-free and at low cost. Surprisingly strong economic arguments are found to not recommend ASC for small farms.

Plants need regular and the appropriate amount of watering to thrive and survive. While agricultural robots exist that can spray water on plants and crops such as the , they are expensive and have limited mobility and/or functionality. We introduce a novel autonomous mobile plant watering robot that uses a 6 degree of freedom (DOF) manipulator, connected to a 4 wheel drive alloy chassis, to be able to hold a garden hose, recognize and detect plants, and to water them with the appropriate amount of water by being able to insert a soil humidity/moisture sensor into the soil. The robot uses Jetson Nano and Arduino microcontroller and real sense camera to perform computer vision to detect plants using real-time YOLOv5 with the Pl@ntNet-300K dataset. The robot uses LIDAR for object and collision avoideance and does not need to move on a pre-defined path and can keep track of which plants it has watered. We provide the Denavit-Hartenberg (DH) Table, forward kinematics, differential driving kinematics, and inverse kinematics along with simulation and experiment results

This paper presents within an arable farming context a predictive logic for the on- and off-switching of a set of nozzles attached to a boom aligned along a working width and carried by a machinery with the purpose of applying spray along the working width while the machinery is traveling along a specific path planning pattern. Concatenation of multiple of those path patterns and corresponding concatenation of proposed switching logics enables nominal lossless spray application for area coverage tasks. Proposed predictive switching logic is compared to the common and state-of-the-art reactive switching logic for Boustrophedon-based path planning for area coverage. The trade-off between reduction in pathlength and increase in the number of required on- and off-switchings for proposed method is discussed.

Soft tissue manipulation is an integral aspect of most surgical procedures; however, the vast majority of surgical graspers used today are made of hard materials, such as metals or hard plastics. Furthermore, these graspers predominately function by pinching tissue between two hard objects as a method for tissue manipulation. As such, the potential to apply too much force during contact, and thus damage tissue, is inherently high. As an alternative approach, gaspers developed using a pneumatic vortex could potentially levitate soft tissue, enabling manipulation with low or even no contact force. In this paper, we present the design and well as a full factorial study of the force characteristics of the vortex gripper grasping soft surfaces with four common shapes, with convex and concave curvature, and ranging over 10 different radii of curvature, for a total of 40 unique surfaces. By changing the parameters of the nozzle elements in the design of the gripper, it was possible to investigate the influence of the mass flow parameters of the vortex gripper on the lifting force for all of these different soft surfaces. An $\pmb{ex}$ $\pmb{vivo}$ experiment was conducted on grasping biological tissues and soft balls of various shapes to show the advantages and disadvantages of the proposed technology. The obtained results allowed us to find limitations in the use of vortex technology and the following stages of its improvement for medical use.

The decline of bee and wind-based pollination systems in greenhouses due to controlled environments and limited access has boost the importance of finding alternative pollination methods. Robotic based pollination systems have emerged as a promising solution, ensuring adequate crop yield even in challenging pollination scenarios. This paper presents a comprehensive review of the current robotic-based pollinators employed in greenhouses. The review categorizes pollinator technologies into major categories such as air-jet, water-jet, linear actuator, ultrasonic wave, and air-liquid spray, each suitable for specific crop pollination requirements. However, these technologies are often tailored to particular crops, limiting their versatility. The advancement of science and technology has led to the integration of automated pollination technology, encompassing information technology, automatic perception, detection, control, and operation. This integration not only reduces labor costs but also fosters the ongoing progress of modern agriculture by refining technology, enhancing automation, and promoting intelligence in agricultural practices. Finally, the challenges encountered in design of pollinator are addressed, and a forward-looking perspective is taken towards future developments, aiming to contribute to the sustainable advancement of this technology.

Fluidic injection provides a promising solution to improve the performance of overexpanded single expansion ramp nozzle (SERN) during vehicle acceleration. However, determining the injection parameters for the best overall performance under multiple nozzle operating conditions is still a challenge. The gradient-based optimization method requires gradients of injection parameters at each design point, leading to high computational costs if traditional computational fluid dynamic (CFD) simulations are adopted. This paper uses a pretrained neural network model to replace CFD during optimization to quickly calculate the nozzle flow field at multiple design points. Considering the physical characteristics of the nozzle flow field, a prior-based prediction strategy is adopted to enhance the model's transferability. In addition, the back-propagation algorithm of the neural network is adopted to quickly evaluate the gradients by calling the computation process only once, thereby greatly reducing the gradient computation time compared to the finite differential method. As a test case, the average nozzle thrust coefficient of a SERN at seven design points is optimized. An improvement in the thrust coefficient of 1.14% is achieved, and the time cost is greatly reduced compared with the traditional optimization methods, even when the time to establish the database for training is considered.

We present a simultaneous sensor-based inspection and footprint coverage (SIFC) planning and control design with applications to autonomous robotic crack mapping and filling. The main challenge of the SIFC problem lies in the coupling of complete sensing (for mapping) and robotic footprint (for filling) coverage tasks. Initially, we assume known target information (e.g., crack) and employ classic cell decomposition methods to achieve complete sensing coverage of the workspace and complete robotic footprint coverage using the least-cost route. Subsequently, we generalize the algorithm to handle unknown target information, allowing the robot to scan and incrementally construct the target graph online while conducting robotic footprint coverage. The online polynomial-time SIFC planning algorithm minimizes the total robot traveling distance, guarantees complete sensing coverage of the entire workspace, and achieves near-optimal robotic footprint coverage, as demonstrated through empirical experiments. For the demonstrated application, we design coordinated nozzle motion control with the planned robot trajectory to efficiently fill all cracks within the robot's footprint. Experimental results are presented to illustrate the algorithm's design, performance, and comparisons. The SIFC algorithm offers a high-efficiency motion planning solution for various robotic applications requiring simultaneous sensing and actuation coverage.

The Health Index (HI) is crucial for evaluating system health, aiding tasks like anomaly detection and predicting remaining useful life for systems demanding high safety and reliability. Tight monitoring is crucial for achieving high precision at a lower cost, with applications such as spray coating. Obtaining HI labels in real-world applications is often cost-prohibitive, requiring continuous, precise health measurements. Therefore, it is more convenient to leverage run-to failure datasets that may provide potential indications of machine wear condition, making it necessary to apply semi-supervised tools for HI construction. In this study, we adapt the Deep Semi-supervised Anomaly Detection (DeepSAD) method for HI construction. We use the DeepSAD embedding as a condition indicators to address interpretability challenges and sensitivity to system-specific factors. Then, we introduce a diversity loss to enrich condition indicators. We employ an alternating projection algorithm with isotonic constraints to transform the DeepSAD embedding into a normalized HI with an increasing trend. Validation on the PHME 2010 milling dataset, a recognized benchmark with ground truth HIs demonstrates meaningful HIs estimations. Our methodology is then applied to monitor wear states of thermal spray coatings using high-frequency voltage. Our contributions create opportunities for more accessible and reliable HI estimation, particularly in cases where obtaining ground truth HI labels is unfeasible.