More insights about the predictive GP posterior used for the contrastive expectation integrals are inthefirst section. Our coding idea is that the Python user only specifies a dictionary of models as input:models = {model1, model2, ..., modelK}.

Embedding non-restrictive prior knowledge, such as energy conservation laws, in learning-based approaches is a key motive to construct physically consistent models from limited data, relevant for, e.g., model-based control. Recent work incorporates Hamiltonian dynamics into Gaussian Process (GP) regression to obtain uncertainty-quantifying models that adhere to the underlying physical principles. However, these works rely on velocity or momentum data, which is rarely available in practice. In this paper, we consider dynamics learning with non-conservative Hamiltonian GPs, and address the more realistic problem setting of learning from input-output data. We provide a fully Bayesian scheme for estimating probability densities of unknown hidden states, of GP hyperparameters, as well as of structural hyperparameters, such as damping coefficients. Considering the computational complexity of GPs, we take advantage of a reduced-rank GP approximation and leverage its properties for computationally efficient prediction and training. The proposed method is evaluated in a nonlinear simulation case study and compared to a state-of-the-art approach that relies on momentum measurements.

XX, XXXX 2017 1 Direct Data Driven Control Using Noisy Measurements Ramin Esmzad, Gokul S. Sankar, T eawon Han, Hamidreza Modares, Senior, IEEE Abstract -- This paper presents a novel direct data-driven control framework for solving the linear quadratic regulator (LQR) under disturbances and noisy state measurements. The system dynamics are assumed unknown, and the LQR solution is learned using only a single trajectory of noisy input-output data while bypassing system identification. Our approach guarantees mean-square stability (MSS) and optimal performance by leveraging convex optimization techniques that incorporate noise statistics directly into the controller synthesis. First, we establish a theoretical result showing that the MSS of an uncertain data-driven system implies the MSS of the true closed-loop system. Building on this, we develop a robust stability condition using linear matrix inequalities (LMIs) that yields a stabilizing controller gain from noisy measurements. Finally, we formulate a data-driven LQR problem as a semidefinite program (SDP) that computes an optimal gain, minimizing the steady-state covariance. Extensive simulations on benchmark systems--including a rotary inverted pendulum and an active suspension system--demonstrate the superior robustness and accuracy of our method compared to existing data-driven LQR approaches. The proposed framework offers a practical and theoretically grounded solution for controller design in noise-corrupted environments where system identification is infeasible. I NTRODUCTION D IRECT data-driven control has recently gained a surge of interest due to its control-oriented approach to solving control design problems [1]-[3]. That is, controller parameters are learned directly using input-output or input-state trajectories, without explicitly constructing a predictive model of the system. Bypassing system identification allows for leveraging the collected data to achieve what is best for the control objectives rather than using the data to fit a predictive model.

Port-Hamiltonian neural networks (pHNNs) are emerging as a powerful modeling tool that integrates physical laws with deep learning techniques. While most research has focused on modeling the entire dynamics of interconnected systems, the potential for identifying and modeling individual subsystems while operating as part of a larger system has been overlooked. This study addresses this gap by introducing a novel method for using pHNNs to identify such subsystems based solely on input-output measurements. By utilizing the inherent compositional property of the port-Hamiltonian systems, we developed an algorithm that learns the dynamics of individual subsystems, without requiring direct access to their internal states. On top of that, by choosing an output error (OE) model structure, we have been able to handle measurement noise effectively. The effectiveness of the proposed approach is demonstrated through tests on interconnected systems, including multi-physics scenarios, demonstrating its potential for identifying subsystem dynamics and facilitating their integration into new interconnected models.

Many application domains, e.g., in medicine and manufacturing, can greatly benefit from pneumatic Soft Robots (SRs). However, the accurate control of SRs has remained a significant challenge to date, mainly due to their nonlinear dynamics and viscoelastic material properties. Conventional control design methods often rely on either complex system modeling or time-intensive manual tuning, both of which require significant amounts of human expertise and thus limit their practicality. In recent works, the data-driven method, Automatic Neural ODE Control (ANODEC) has been successfully used to -- fully automatically and utilizing only input-output data -- design controllers for various nonlinear systems in silico, and without requiring prior model knowledge or extensive manual tuning. In this work, we successfully apply ANODEC to automatically learn to perform agile, non-repetitive reference tracking motion tasks in a real-world SR and within a finite time horizon. To the best of the authors' knowledge, ANODEC achieves, for the first time, performant control of a SR with hysteresis effects from only 30 seconds of input-output data and without any prior model knowledge. We show that for multiple, qualitatively different and even out-of-training-distribution reference signals, a single feedback controller designed by ANODEC outperforms a manually tuned PID baseline consistently. Overall, this contribution not only further strengthens the validity of ANODEC, but it marks an important step towards more practical, easy-to-use SRs that can automatically learn to perform agile motions from minimal experimental interaction time.

We consider the problem of synthesizing a dynamic output-feedback controller for a linear system, using solely input-output data corrupted by measurement noise. To handle input-output data, an auxiliary representation of the original system is introduced. By exploiting the structure of the auxiliary system, we design a controller that robustly stabilizes all possible systems consistent with data. Notably, we also provide a novel solution to extend the results to generic multi-input multi-output systems. The findings are illustrated by numerical examples.

We examine how a human-robot interaction (HRI) system may be designed when input-output data from previous experiments are available. In particular, we consider how to select an optimal impedance in the assistance design for a cooperative manipulation task with a new operator. Due to the variability between individuals, the design parameters that best suit one operator of the robot may not be the best parameters for another one. However, by incorporating historical data using a linear auto-regressive (AR-1) Gaussian process, the search for a new operator's optimal parameters can be accelerated. We lay out a framework for optimizing the human-robot cooperative manipulation that only requires input-output data. We establish how the AR-1 model improves the bound on the regret and numerically simulate a human-robot cooperative manipulation task to show the regret improvement. Further, we show how our approach's input-output nature provides robustness against modeling error through an additional numerical study.

This paper presents a sample-efficient data-driven method to design model predictive control (MPC) for cable-actuated soft robotics using Bayesian optimization. Instead of modeling the complex dynamics of the soft robots, the proposed approach uses Bayesian optimization to search the best-guessed low-dimensional prediction model and its associated controller to minimize the objective function of closed-loop responses. The prediction model is updated by Bayesian optimization from the closed-loop input-output data in each iteration. A linear MPC is then designed based on the updated prediction model, and evaluated based on the closed-loop responses. Different from directly searching controller parameters, the closed-loop system stability, and inputs/outputs constraints can be easily handled in the MPC design. After a few iterations, a convergent solution of a (sub-)optimal controller can be obtained, which minimizes the user-defined closed-loop performance index. The proposed method is simulated and validated by a high-fidelity simulation of a cable-actuated soft robot. The simulation results demonstrate that the proposed approach can achieve desired tracking controller for the soft robot without a prior-known model.

Data Envelopment Analysis (DEA) is a technique used to measure the efficiency of decision-making units (DMUs). In order to measure the efficiency of DMUs, the essential requirement is input-output data. Data is usually collected by humans, machines, or both. Due to human/machine errors, there are chances of having some missing values or inaccuracy, such as vagueness/uncertainty/hesitation in the collected data. In this situation, it will be difficult to measure the efficiencies of DMUs accurately. To overcome these shortcomings, a method is presented that can deal with missing values and inaccuracy in the data. To measure the performance efficiencies of DMUs, an input minimization BCC (IMBCC) model in a fully intuitionistic fuzzy (IF) environment is proposed. To validate the efficacy of the proposed fully intuitionistic fuzzy input minimization BCC (FIFIMBCC) model and the technique to deal with missing values in the data, a real-life application to measure the performance efficiencies of Indian police stations is presented.