Automating disassembly of critical components from end-of-life (EoL) desktops, such as high-value items like RAM modules and CPUs, as well as sensitive parts like hard disk drives, remains challenging due to the inherent variability and uncertainty of these products. Moreover, their disassembly requires sequential, precise, and dexterous operations, further increasing the complexity of automation. Current robotic disassembly processes are typically divided into several stages: perception, sequence planning, task planning, motion planning, and manipulation. Each stage requires explicit modeling, which limits generalization to unfamiliar scenarios. Recent development of vision-language-action (VLA) models has presented an end-to-end approach for general robotic manipulation tasks. Although VLAs have demonstrated promising performance on simple tasks, the feasibility of applying such models to complex disassembly remains largely unexplored. In this paper, we collected a customized dataset for robotic RAM and CPU disassembly and used it to fine-tune two well-established VLA approaches, OpenVLA and OpenVLA-OFT, as a case study. We divided the whole disassembly task into several small steps, and our preliminary experimental results indicate that the fine-tuned VLA models can faithfully complete multiple early steps but struggle with certain critical subtasks, leading to task failure. However, we observed that a simple hybrid strategy that combines VLA with a rule-based controller can successfully perform the entire disassembly operation. These findings highlight the current limitations of VLA models in handling the dexterity and precision required for robotic EoL product disassembly. By offering a detailed analysis of the observed results, this study provides insights that may inform future research to address current challenges and advance end-to-end robotic automated disassembly.

Abstract-- T o support the circular economy, robotic systems must not only assemble new products but also disassemble end-of-life (EOL) ones for reuse, recycling, or safe disposal. Existing approaches to disassembly sequence planning often assume deterministic and fully observable product models, yet real EOL products frequently deviate from their initial designs due to wear, corrosion, or undocumented repairs. We argue that disassembly should therefore be formulated as a Partially Observable Markov Decision Process (POMDP), which naturally captures uncertainty about the product's internal state. We present a mathematical formulation of disassembly as a POMDP, in which hidden variables represent uncertain structural or physical properties. Building on this formulation, we propose a task and motion planning framework that automatically derives specific POMDP models from CAD data, robot capabilities, and inspection results. T o obtain tractable policies, we approximate this formulation with a reinforcement-learning approach that operates on stochastic action outcomes informed by inspection priors, while a Bayesian filter continuously maintains beliefs over latent EOL conditions during execution. Using three products on two robotic systems, we demonstrate that this probabilistic planning framework outperforms deterministic baselines in terms of average disassembly time and variance, generalizes across different robot setups, and successfully adapts to deviations from the CAD model, such as missing or stuck parts. I. INTRODUCTION Modern industrial production still follows a linear model of make-use-dispose, accelerating the depletion of natural resources on our planet.

Abstract--T okenization is fundamental in assembly code analysis, impacting intrinsic characteristics like vocabulary size, semantic coverage, and extrinsic performance in downstream tasks. Despite its significance, tokenization in the context of assembly code remains an underexplored area. This study aims to address this gap by evaluating the intrinsic properties of Natural Language Processing (NLP) tokenization models and parameter choices, such as vocabulary size. We explore prepro-cessing customization options and pre-tokenization rules tailored to the unique characteristics of assembly code. Additionally, we assess their impact on downstream tasks like function signature prediction--a critical problem in binary code analysis. T o this end, we conduct a thorough study on various tokeniza-tion models, systematically analyzing their efficiency in encoding assembly instructions and capturing semantic nuances. Through intrinsic evaluations, we compare tokenizers based on tokeniza-tion efficiency, vocabulary compression, and representational fidelity for assembly code. Using state-of-the-art pre-trained models such as the decoder-only Large Language Model (LLM) Llama 3.2, the encoder-only transformer BERT, and the encoder-decoder model BART, we evaluate the effectiveness of these tokenizers across multiple performance metrics. Preliminary findings indicate that tokenizer choice significantly influences downstream performance, with intrinsic metrics providing partial but incomplete predictability of extrinsic evaluation outcomes. These results reveal complex trade-offs between intrinsic tokenizer properties and their utility in practical assembly code tasks. Ultimately, this study provides valuable insights into optimizing tokenization models for low-level code analysis, contributing to the robustness and scalability of Natural Language Model (NLM)-based binary analysis workflows. Tokenization is critical in transforming raw input data into structured representations, a process of utmost importance for Machine Learning (ML) and NLM model tasks [1]-[3]. While tokenization strategies have been studied extensively for natural [4] and high-level programming languages [5], assembly code presents unique challenges due to its low-level operations, diverse instruction sets, and non-standardized syntax across architectures. These challenges highlight the need for specialized tokenization techniques that effectively capture assembly code's structural and semantic intricacies [2]. Despite its importance, the role of tokenization in assembly code processing remains underexplored, particularly in its impact on downstream tasks involving modern NLMs. Recent research underscores the significant influence of tokenization on NLM model performance.

Intelligent robotic disassembly of end-of-life (EOL) products has been a long-standing challenge in robotics. While machine learning techniques have shown promise, the lack of specialized hardware limits their application in real-world scenarios. We introduce DeGrip, a customized gripper designed for the disassembly of EOL computer desktops. DeGrip provides three degrees of freedom (DOF), enabling arbitrary configurations within the disassembly environment when mounted on a robotic manipulator. It employs a cable-driven transmission mechanism that reduces its overall size and enables operation in confined spaces. The wrist is designed to decouple the actuation of wrist and jaw joints. We also developed an EOL desktop disassembly environment in Isaac Sim to evaluate the effectiveness of DeGrip. The tasks were designed to demonstrate its ability to operate in confined spaces and disassemble components in arbitrary configurations. The evaluation results confirm the capability of DeGrip for EOL desktop disassembly.

Abstract-- Human-robot collaboration (HRC) is a key focus of Industry 5.0, aiming to enhance worker productivity while ensuring well-being. The ability to perceive human psycho-physical states, such as stress and cognitive load, is crucial for adaptive and human-aware robotics. This paper introduces MultiPhysio-HRC, a multimodal dataset containing physiological, audio, and facial data collected during real-world HRC scenarios. The dataset includes electroencephalography (EEG), electrocardiography (ECG), electrodermal activity (EDA), respiration (RESP), electromyography (EMG), voice recordings, and facial action units. The dataset integrates controlled cognitive tasks, immersive virtual reality experiences, and industrial disassembly activities performed manually and with robotic assistance, to capture a holistic view of the participants' mental states. Rich ground truth annotations were obtained using validated psychological self-assessment questionnaires. Baseline models were evaluated for stress and cognitive load classification, demonstrating the dataset's potential for affective computing and human-aware robotics research. MultiPhysio-HRC is publicly available to support research in human-centered automation, workplace well-being, and intelligent robotic systems.

Abstract--End-of-Life (EoL) phones significantly exacerbate global e-waste challenges due to their high production volumes and short lifecycles. Disassembly is among the most critical processes in EoL phone recycling. However, it relies heavily on human labor due to product variability. Consequently, the manual process is both labor-intensive and time-consuming. In this paper, we propose a low-cost, easily deployable automated and selective disassembly and sorting system for EoL phones, consisting of three subsystems: an adaptive cutting system, a vision-based robotic sorting system, and a battery removal system. The system can process over 120 phones per hour with an average disassembly success rate of 98.9%, efficiently delivering selected high-value components to downstream processing. It provides a reliable and scalable automated solution to the pressing challenge of EoL phone disassembly. Additionally, the automated system can enhance disassembly economics, converting a previously unprofitable process into one that yields a net profit per unit weight of EoL phones. E-waste presents a global challenge due to its rapid growth, high resource value, and the severe environmental and health risks from improper recycling and hazardous substances [1-3]. Global e-waste surged to a record 62 million tonnes in 2022 and is expected to reach 82 million tonnes by 2030 [4]. Recycling converts e-waste components into valuable raw materials, which is critical for addressing the escalating e-waste problem and supporting a sustainable circular economy [5-10]. Nevertheless, only 22.3 % of e-waste was recorded as recycled in 2022 [4]. The high human labor cost and health risk concerns are the major challenges associated with the recycling process [11]. This material is based upon work supported by the REMADE Institute, USA (21-01-RM-5083).

Electric-vehicle (EV) battery disassembly requires precise multi-robot coordination, short and reliable motions, and robust collision safety in cluttered, dynamic scenes. We propose a four-layer task-and-motion planning (TAMP) framework that couples symbolic task planning and cost- and accessibility-aware allocation with a TP-GMM-guided motion planner learned from demonstrations. Stereo vision with YOLOv8 provides real-time component localization, while OctoMap-based 3D mapping and FCL(Flexible Collision Library) checks in MoveIt unify predictive digital-twin collision checking with reactive, vision-based avoidance. Validated on two UR10e robots across cable, busbar, service plug, and three leaf-cell removals, the approach yields substantially more compact and safer motions than a default RRTConnect baseline under identical perception and task assignments: average end-effector path length drops by $-63.3\%$ and makespan by $-8.1\%$; per-arm swept volumes shrink (R1: $0.583\rightarrow0.139\,\mathrm{m}^3$; R2: $0.696\rightarrow0.252\,\mathrm{m}^3$), and mutual overlap decreases by $47\%$ ($0.064\rightarrow0.034\,\mathrm{m}^3$). These results highlight improved autonomy, precision, and safety for multi-robot EV battery disassembly in unstructured, dynamic environments.

Disassembling and sorting Electric Vehicle Batteries (EVBs) supports a sustainable transition to electric vehicles by enabling a closed-loop supply chain. Currently, the manual disassembly process exposes workers to hazards, including electrocution and toxic chemicals. We propose a teleoperated system for the safe disassembly and sorting of EVBs. A human-in-the-loop can create and save disassembly sequences for unknown EVB types, enabling future automation. An RGB camera aligns the physical and digital twins of the EVB, and the digital twin of the robot is based on the Robot Operating System (ROS) middleware. This hybrid approach combines teleoperation and automation to improve safety, adaptability, and efficiency in EVB disassembly and sorting. The economic contribution is realized by reducing labor dependency and increasing throughput in battery recycling. An online pilot study was set up to evaluate the usability of the presented approach, and the results demonstrate the potential as a user-friendly solution.

This study presents a system integration approach for planning schedules, sequences, tasks, and motions for reconfigurable robots to automatically disassemble constrained structures in a non-destructive manner. Such systems must adapt their configuration and coordination to the target structure, but the large and complex search space makes them prone to local optima. To address this, we integrate multiple robot arms equipped with different types of tools, together with a rotary stage, into a reconfigurable setup. This flexible system is based on a hierarchical optimization method that generates plans meeting multiple preferred conditions under mandatory requirements within a realistic timeframe. The approach employs two many-objective genetic algorithms for sequence and task planning with motion evaluations, followed by constraint programming for scheduling. Because sequence planning has a much larger search space, we introduce a chromosome initialization method tailored to constrained structures to mitigate the risk of local optima. Simulation results demonstrate that the proposed method effectively solves complex problems in reconfigurable robotic disassembly.

This study addresses a flexible holding tool for robotic disassembly. We propose a shell-type soft jig that securely and universally holds objects, mitigating the risk of component damage and adapting to diverse shapes while enabling soft fixation that is robust to recognition, planning, and control errors. The balloon-based holding mechanism ensures proper alignment and stable holding performance, thereby reducing the need for dedicated jig design, highly accurate perception, precise grasping, and finely tuned trajectory planning that are typically required with conventional fixtures. Our experimental results demonstrate the practical feasibility of the proposed jig through performance comparisons with a vise and a jamming-gripper-inspired soft jig. Tests on ten different objects further showed representative successes and failures, clarifying the jig's limitations and outlook.