Fluidic injection provides a promising solution to improve the performance of overexpanded single expansion ramp nozzle (SERN) during vehicle acceleration. However, determining the injection parameters for the best overall performance under multiple nozzle operating conditions is still a challenge. The gradient-based optimization method requires gradients of injection parameters at each design point, leading to high computational costs if traditional computational fluid dynamic (CFD) simulations are adopted. This paper uses a pretrained neural network model to replace CFD during optimization to quickly calculate the nozzle flow field at multiple design points. Considering the physical characteristics of the nozzle flow field, a prior-based prediction strategy is adopted to enhance the model's transferability. In addition, the back-propagation algorithm of the neural network is adopted to quickly evaluate the gradients by calling the computation process only once, thereby greatly reducing the gradient computation time compared to the finite differential method. As a test case, the average nozzle thrust coefficient of a SERN at seven design points is optimized. An improvement in the thrust coefficient of 1.14% is achieved, and the time cost is greatly reduced compared with the traditional optimization methods, even when the time to establish the database for training is considered.

Neuronal damage, in the form of both brain and spinal cord injuries, is one of the major causes of disability and death in young adults worldwide. One way to assess the direct damage occurring after a mechanical insult is the simulation of the neuronal cells functional deficits following the mechanical event. In this study, we use a coupled mechanical electrophysiological model with several free parameters that are required to be calibrated against experimental results. The calibration is carried out by means of an evolutionary algorithm (differential evolution, DE) that needs to evaluate each configuration of parameters on six different damage cases, each of them taking several minutes to compute. To minimise the simulation time of the parameter tuning for the DE, the stretch of one unique fixed-diameter axon with a simplified triggering process is used to speed up the calculations. The model is then leveraged for the parameter optimization of the more realistic bundle of independent axons, an impractical configuration to run on a single processor computer. To this end, we have developed a parallel implementation based on OpenMP that runs on a multi-processor taking advantage of all the available computational power. The parallel DE algorithm obtains good results, outperforming the best effort achieved by published manual calibration, in a fraction of the time. While not being able to fully capture the experimental results, the resulting nerve model provides a complex averaging framework for nerve damage simulation able to simulate gradual axonal functional alteration in a bundle.

The design of food diets in the context of animal nutrition is a complex problem that aims to develop cost-effective formulations while balancing minimum nutritional content. Traditional approaches based on theoretical models of metabolic responses and concentrations of digestible energy in raw materials face limitations in incorporating zootechnical or environmental variables affecting the performance of animals and including multiple objectives aligned with sustainable development policies. Recently, multi-objective Bayesian optimization has been proposed as a promising heuristic alternative able to deal with the combination of multiple sources of information, multiple and diverse objectives, and with an intrinsic capacity to deal with uncertainty in the measurements that could be related to variability in the nutritional content of raw materials. However, Bayesian optimization encounters difficulties in high-dimensional search spaces, leading to exploration predominantly at the boundaries. This work analyses a strategy to split the search space into regions that provide local candidates termed multi-objective regionalized Bayesian optimization as an alternative to improve the quality of the Pareto set and Pareto front approximation provided by BO in the context of swine diet design. Results indicate that this regionalized approach produces more diverse non-dominated solutions compared to the standard multi-objective Bayesian optimization. Besides, the regionalized strategy was four times more effective in finding solutions that outperform those identified by a stochastic programming approach referenced in the literature. Experiments using batches of query candidate solutions per iteration show that the optimization process can also be accelerated without compromising the quality of the Pareto set approximation during the initial, most critical phase of optimization.

Automated experiments in scanning transmission electron microscopy (STEM) require rapid image segmentation to optimize data representation for human interpretation, decision-making, site-selective spectroscopies, and atomic manipulation. Currently, segmentation tasks are typically performed using supervised machine learning methods, which require human-labeled data and are sensitive to out-of-distribution drift effects caused by changes in resolution, sampling, or beam shape. Here, we operationalize and benchmark a recently proposed reward-driven optimization workflow for on-the fly image analysis in STEM. This unsupervised approach is much more robust, as it does not rely on human labels and is fully explainable. The explanatory feedback can help the human to verify the decision making and potentially tune the model by selecting the position along the Pareto frontier of reward functions. We establish the timing and effectiveness of this method, demonstrating its capability for real-time performance in high-throughput and dynamic automated STEM experiments. The reward driven approach allows to construct explainable robust analysis workflows and can be generalized to a broad range of image analysis tasks in electron and scanning probe microscopy and chemical imaging.

Background: Given the fast-paced nature of today's technology, which has surpassed human performance in tasks like image classification, visual reasoning, and English understanding, assessing the impact of Machine Learning (ML) on energy consumption is crucial. Traditionally, ML projects have prioritized accuracy over energy, creating a gap in energy consumption during model inference. Aims: This study aims to (i) analyze image classification datasets and pre-trained models, (ii) improve inference efficiency by comparing optimized and non-optimized models, and (iii) assess the economic impact of the optimizations. Method: We conduct a controlled experiment to evaluate the impact of various PyTorch optimization techniques (dynamic quantization, torch.compile, local pruning, and global pruning) to 42 Hugging Face models for image classification. The metrics examined include GPU utilization, power and energy consumption, accuracy, time, computational complexity, and economic costs. The models are repeatedly evaluated to quantify the effects of these software engineering tactics. Results: Dynamic quantization demonstrates significant reductions in inference time and energy consumption, making it highly suitable for large-scale systems. Additionally, torch.compile balances accuracy and energy. In contrast, local pruning shows no positive impact on performance, and global pruning's longer optimization times significantly impact costs. Conclusions: This study highlights the role of software engineering tactics in achieving greener ML models, offering guidelines for practitioners to make informed decisions on optimization methods that align with sustainability goals.

Modern recommender systems are built upon computation-intensive infrastructure, and it is challenging to perform real-time computation for each request, especially in peak periods, due to the limited computational resources. Recommending by user-wise result caches is widely used when the system cannot afford a real-time recommendation. However, it is challenging to allocate real-time and cached recommendations to maximize the users' overall engagement. This paper shows two key challenges to cache allocation, i.e., the value-strategy dependency and the streaming allocation. Then, we propose a reinforcement prediction-allocation framework (RPAF) to address these issues. RPAF is a reinforcement-learning-based two-stage framework containing prediction and allocation stages. The prediction stage estimates the values of the cache choices considering the value-strategy dependency, and the allocation stage determines the cache choices for each individual request while satisfying the global budget constraint. We show that the challenge of training RPAF includes globality and the strictness of budget constraints, and a relaxed local allocator (RLA) is proposed to address this issue. Moreover, a PoolRank algorithm is used in the allocation stage to deal with the streaming allocation problem. Experiments show that RPAF significantly improves users' engagement under computational budget constraints.

The use of data-driven methods in fluid mechanics has surged dramatically in recent years due to their capacity to adapt to the complex and multi-scale nature of turbulent flows, as well as to detect patterns in large-scale simulations or experimental tests. In order to interpret the relationships generated in the models during the training process, numerical attributions need to be assigned to the input features. One important example are the additive-feature-attribution methods. These explainability methods link the input features with the model prediction, providing an interpretation based on a linear formulation of the models. The SHapley Additive exPlanations (SHAP values) are formulated as the only possible interpretation that offers a unique solution for understanding the model. In this manuscript, the additive-feature-attribution methods are presented, showing four common implementations in the literature: kernel SHAP, tree SHAP, gradient SHAP, and deep SHAP. Then, the main applications of the additive-feature-attribution methods are introduced, dividing them into three main groups: turbulence modeling, fluid-mechanics fundamentals, and applied problems in fluid dynamics and heat transfer. This review shows thatexplainability techniques, and in particular additive-feature-attribution methods, are crucial for implementing interpretable and physics-compliant deep-learning models in the fluid-mechanics field.

This paper introduces the Pareto Data Framework, an approach for identifying and selecting the Minimum Viable Data (MVD) required for enabling machine learning applications on constrained platforms such as embedded systems, mobile devices, and Internet of Things (IoT) devices. We demonstrate that strategic data reduction can maintain high performance while significantly reducing bandwidth, energy, computation, and storage costs. The framework identifies Minimum Viable Data (MVD) to optimize efficiency across resource-constrained environments without sacrificing performance. It addresses common inefficient practices in an IoT application such as overprovisioning of sensors and overprecision, and oversampling of signals, proposing scalable solutions for optimal sensor selection, signal extraction and transmission, and data representation. An experimental methodology demonstrates effective acoustic data characterization after downsampling, quantization, and truncation to simulate reduced-fidelity sensors and network and storage constraints; results shows that performance can be maintained up to 95\% with sample rates reduced by 75\% and bit depths and clip length reduced by 50\% which translates into substantial cost and resource reduction. These findings have implications on the design and development of constrained systems. The paper also discusses broader implications of the framework, including the potential to democratize advanced AI technologies across IoT applications and sectors such as agriculture, transportation, and manufacturing to improve access and multiply the benefits of data-driven insights.

Model Predictive Control (MPC) is a common tool for the control of nonlinear, real-world systems, such as legged robots. However, solving MPC quickly enough to enable its use in real-time is often challenging. One common solution is given by real-time iterations, which does not solve the MPC problem to convergence, but rather close enough to give an approximate solution. In this paper, we extend this idea to a bilevel control framework where a "high-level" optimization program modifies a controller parameter of a "low-level" MPC problem which generates the control inputs and desired state trajectory. We propose an algorithm to iterate on this bilevel program in real-time and provide conditions for its convergence and improvements in stability. We then demonstrate the efficacy of this algorithm by applying it to a quadrupedal robot where the high-level problem optimizes a contact schedule in real-time. We show through simulation that the algorithm can yield improvements in disturbance rejection and optimality, while creating qualitatively new gaits.

We study the problem of sampling robot trajectories and introduce the notion of C-Uniformity. As opposed to the standard method of uniformly sampling control inputs (which lead to biased samples of the configuration space), C-Uniform trajectories are generated by control actions which lead to uniform sampling of the configuration space. After presenting an intuitive closed-form solution to generate C-Uniform trajectories for the 1D random-walker, we present a network-flow based optimization method to precompute C-Uniform trajectories for general robot systems. We apply the notion of C-Uniformity to the design of Model Predictive Path Integral controllers. Through simulation experiments, we show that using C-Uniform trajectories significantly improves the performance of MPPI-style controllers, achieving up to 40% coverage performance gain compared to the best baseline. We demonstrate the practical applicability of our method with an implementation on a 1/10th scale racer.