This paper investigates a joint beamforming and resource allocation problem in downlink reconfigurable intelligent surface (RIS)-assisted orthogonal frequency division multiplexing (OFDM) systems to minimize the average delay, where data packets for each user arrive at the base station (BS) stochastically. The sequential optimization problem is inherently a Markov decision process (MDP), thus falling within the remit of reinforcement learning. To effectively handle the mixed action space and reduce the state space dimensionality, a hybrid deep reinforcement learning (DRL) approach is proposed. Specifically, proximal policy optimization (PPO)-Theta is employed to optimize the RIS phase shift design, while PPO-N is responsible for subcarrier allocation decisions. The active beamforming at the BS is then derived from the jointly optimized RIS phase shifts and subcarrier allocation decisions. To further mitigate the curse of dimensionality associated with subcarrier allocation, a multi-agent strategy is introduced to optimize the subcarrier allocation indicators more efficiently. Moreover, to achieve more adaptive resource allocation and accurately capture the network dynamics, key factors closely related to average delay, such as the number of backlogged packets in buffers and current packet arrivals, are incorporated into the state space. Furthermore, a transfer learning framework is introduced to enhance the training efficiency and accelerate convergence. Simulation results demonstrate that the proposed algorithm significantly reduces the average delay, enhances resource allocation efficiency, and achieves superior system robustness and fairness compared to baseline methods.

We present a novel approach to help decision-makers efficiently identify preferred solutions from the Pareto set of a multi-objective optimization problem. Our method uses a Bayesian model to estimate the decision-maker's utility function based on pairwise comparisons. Aided by this model, a principled elicitation strategy selects queries interactively to balance exploration and exploitation, guiding the discovery of high-utility solutions. The approach is flexible: it can be used interactively or a posteriori after estimating the Pareto front through standard multi-objective optimization techniques. Additionally, at the end of the elicitation phase, it generates a reduced menu of high-quality solutions, simplifying the decision-making process. Through experiments on test problems with up to nine objectives, our method demonstrates superior performance in finding high-utility solutions with a small number of queries. We also provide an open-source implementation of our method to support its adoption by the broader community.

This paper proposes a unified approach for designing stochastic optimization algorithms that robustly scale to the federated learning setting. Our work studies a class of Majorize-Minimization (MM) problems, which possesses a linearly parameterized family of majorizing surrogate functions. This framework encompasses (proximal) gradient-based algorithms for (regularized) smooth objectives, the Expectation Maximization algorithm, and many problems seen as variational surrogate MM. We show that our framework motivates a unifying algorithm called Stochastic Approximation Stochastic Surrogate MM (\SSMM), which includes previous stochastic MM procedures as special instances. We then extend \SSMM\ to the federated setting, while taking into consideration common bottlenecks such as data heterogeneity, partial participation, and communication constraints; this yields \QSMM. The originality of \QSMM\ is to learn locally and then aggregate information characterizing the \textit{surrogate majorizing function}, contrary to classical algorithms which learn and aggregate the \textit{original parameter}. Finally, to showcase the flexibility of this methodology beyond our theoretical setting, we use it to design an algorithm for computing optimal transport maps in the federated setting.

The core of the freeway merging control problem lies in dynamic queue propagation and dissipation linked to merging vehicle behavior. Traditionally, queuing is modeled through demand-supply interactions with time varying demand and fixed capacity. However, field observations show flow rates decrease during congestion at freeway merges due to the impact of intersecting traffic, a factor overlooked in fundamental diagrams. This manuscript introduces an analytical approach to characterize and control the dynamic multi-stage merging of autonomous vehicles, prioritizing traffic efficiency and safety. For the first time, the effective discharge rate at the merging point, reduced by the multi-stage dynamic merging process, is analytically derived using a closed form formulation. Leveraging this expression, performance metrics such as queue length and traffic delay are derived as the first objective. Additionally, a crash risk function is established to quantitatively assess potential collisions during the merging process, serving as the second objective. Finally, the problem is formulated as a dynamic programming model to jointly minimize delay and crash risk, with the merging location and speed as decision variables. Given the terminal state, the ramp vehicle merging task is formulated as a recursive optimization problem, employing backward induction to find the minimum cost solution. Numerical experiments using the NGSIM dataset validate the derived effective discharge rate. The results indicate that the proposed model outperforms two benchmark algorithms, leading to a more efficient and safer merging process.

--Semantic communication systems introduce a new paradigm in wireless communications, focusing on transmitting the intended meaning rather than ensuring strict bit-level accuracy. These systems often rely on Deep Neural Networks (DNNs) to learn and encode meaning directly from data, enabling more efficient communication. However, in multi-user settings where interacting agents are trained independently--without shared context or joint optimization--divergent latent representations across AI-native devices can lead to semantic mismatches, impeding mutual understanding even in the absence of traditional transmission errors. In this work, we address semantic mismatch in Multiple-Input Multiple-Output (MIMO) channels by proposing a joint physical and semantic channel equalization framework that leverages the presence of Reconfigurable Intelligent Surfaces (RIS). The semantic equalization is implemented as a sequence of transformations: (i) a pre-equalization stage at the transmitter; (ii) propagation through the RIS-aided channel; and (iii) a post-equalization stage at the receiver . We formulate the problem as a constrained Minimum Mean Squared Error (MMSE) optimization and propose two solutions: (i) a linear semantic equalization chain, and (ii) a non-linear DNN-based semantic equalizer . Both methods are designed to operate under semantic compression in the latent space and adhere to transmit power constraints. Through extensive evaluations, we show that the proposed joint equalization strategies consistently outperform conventional, disjoint approaches to physical and semantic channel equalization across a broad range of scenarios and wireless channel conditions. Index T erms --Semantic communications, latent space alignment, reconfigurable intelligent surfaces, 6G. OR the last seven decades, communication systems have been designed with the main objective of reliably transmitting symbols through noisy communication channels, typically disregarding the interpretation and impact of these symbols upon reception. Following this principle, communication networks have achieved significant advancements in bit transmission rate and reliability, fundamental metrics for data-centric applications such as video and audio streaming, where communication itself is the primary objective.

Prompt engineering represents a critical bottleneck to harness the full potential of Large Language Models (LLMs) for solving complex tasks, as it requires specialized expertise, significant trial-and-error, and manual intervention. This challenge is particularly pronounced for tasks involving subjective quality assessment, where defining explicit optimization objectives becomes fundamentally problematic. Existing automated prompt optimization methods falter in these scenarios, as they typically require well-defined task-specific numerical fitness functions or rely on generic templates that cannot capture the nuanced requirements of complex use cases. We introduce DEEVO (DEbate-driven EVOlutionary prompt optimization), a novel framework that guides prompt evolution through a debate-driven evaluation with an Elo-based selection. Contrary to prior work, DEEVOs approach enables exploration of the discrete prompt space while preserving semantic coherence through intelligent crossover and strategic mutation operations that incorporate debate-based feedback, combining elements from both successful and unsuccessful prompts based on identified strengths rather than arbitrary splicing. Using Elo ratings as a fitness proxy, DEEVO simultaneously drives improvement and preserves valuable diversity in the prompt population. Experimental results demonstrate that DEEVO significantly outperforms both manual prompt engineering and alternative state-of-the-art optimization approaches on open-ended tasks and close-ended tasks despite using no ground truth feedback. By connecting LLMs reasoning capabilities with adaptive optimization, DEEVO represents a significant advancement in prompt optimization research by eliminating the need of predetermined metrics to continuously improve AI systems.

We introduce JEDI, a test-time adaptation method that enhances subject separation and compositional alignment in diffusion models without requiring retraining or external supervision. JEDI operates by minimizing semantic entanglement in attention maps using a novel Jensen-Shannon divergence based objective. To improve efficiency, we leverage adversarial optimization, reducing the number of updating steps required. JEDI is model-agnostic and applicable to architectures such as Stable Diffusion 1.5 and 3.5, consistently improving prompt alignment and disentanglement in complex scenes. Additionally, JEDI provides a lightweight, CLIP-free disentanglement score derived from internal attention distributions, offering a principled benchmark for compositional alignment under test-time conditions. Code and results are available at https://ericbill21.github.io/JEDI/.

One of the most practical and challenging types of black-box adversarial attacks is the hard-label attack, where only the top-1 predicted label is available. One effective approach is to search for the optimal ray direction from the benign image that minimizes the $\ell_p$-norm distance to the adversarial region. The unique advantage of this approach is that it transforms the hard-label attack into a continuous optimization problem. The objective function value is the ray's radius, which can be obtained via binary search at a high query cost. Existing methods use a "sign trick" in gradient estimation to reduce the number of queries. In this paper, we theoretically analyze the quality of this gradient estimation and propose a novel prior-guided approach to improve ray search efficiency both theoretically and empirically. Specifically, we utilize the transfer-based priors from surrogate models, and our gradient estimators appropriately integrate them by approximating the projection of the true gradient onto the subspace spanned by these priors and random directions, in a query-efficient manner. We theoretically derive the expected cosine similarities between the obtained gradient estimators and the true gradient, and demonstrate the improvement achieved by incorporating priors. Extensive experiments on the ImageNet and CIFAR-10 datasets show that our approach significantly outperforms 11 state-of-the-art methods in terms of query efficiency.

In the context of labor shortages and rising costs, construction robots are regarded as the key to revolutionizing traditional construction methods and improving efficiency and quality in the construction industry. In order to ensure that construction robots can perform tasks efficiently and accurately in complex construction environments, traditional single-objective trajectory optimization methods are difficult to meet the complex requirements of the changing construction environment. Therefore, we propose a multi-objective trajectory optimization for the robotic arm used in the curtain wall installation. First, we design a robotic arm for curtain wall installation, integrating serial, parallel, and folding arm elements, while considering its physical properties and motion characteristics. In addition, this paper proposes an NSGA-III-FO algorithm (NSGA-III with Focused Operator, NSGA-III-FO) that incorporates a focus operator screening mechanism to accelerate the convergence of the algorithm towards the Pareto front, thereby effectively balancing the multi-objective constraints of construction robots. The proposed algorithm is tested against NSGA-III, MOEA/D, and MSOPS-II in ten consecutive trials on the DTLZ3 and WFG3 test functions, showing significantly better convergence efficiency than the other algorithms. Finally, we conduct two sets of experiments on the designed robotic arm platform, which confirm the efficiency and practicality of the NSGA-III-FO algorithm in solving multi-objective trajectory planning problems for curtain wall installation tasks.

Probabilistic graphical modeling is a branch of machine learning that uses probability distributions to describe the world, make predictions, and support decision-making under uncertainty. Underlying this modeling framework is an elegant body of theory that bridges two mathematical traditions: probability and graph theory. This framework provides compact yet expressive representations of joint probability distributions, yielding powerful generative models for probabilistic reasoning. This tutorial provides a concise introduction to the formalisms, methods, and applications of this modeling framework. After a review of basic probability and graph theory, we explore three dominant themes: (1) the representation of multivariate distributions in the intuitive visual language of graphs, (2) algorithms for learning model parameters and graphical structures from data, and (3) algorithms for inference, both exact and approximate.