This paper develops an adaptive PID autotuner for multicopters, and presents simulation and experimental results. The autotuner consists of adaptive digital control laws based on retrospective cost adaptive control implemented in the PX4 flight stack. A learning trajectory is used to optimize the autopilot during a single flight. The autotuned autopilot is then compared with the default PX4 autopilot by flying a test trajectory constructed using the second-order Hilbert curve. In order to investigate the sensitivity of the autotuner to the quadcopter dynamics, the mass of the quadcopter is varied, and the performance of the autotuned and default autopilot is compared. It is observed that the autotuned autopilot outperforms the default autopilot.

A transition to a low-carbon electricity supply is crucial to limit the impacts of climate change. Reducing carbon emissions could help prevent the world from reaching a tipping point, where runaway emissions are likely. Runaway emissions could lead to extremes in weather conditions around the world -- especially in problematic regions unable to cope with these conditions. However, the movement to a low-carbon energy supply can not happen instantaneously due to the existing fossil-fuel infrastructure and the requirement to maintain a reliable energy supply. Therefore, a low-carbon transition is required, however, the decisions various stakeholders should make over the coming decades to reduce these carbon emissions are not obvious. This is due to many long-term uncertainties, such as electricity, fuel and generation costs, human behaviour and the size of electricity demand. A well choreographed low-carbon transition is, therefore, required between all of the heterogenous actors in the system, as opposed to changing the behaviour of a single, centralised actor. The objective of this thesis is to create a novel, open-source agent-based model to better understand the manner in which the whole electricity market reacts to different factors using state-of-the-art machine learning and artificial intelligence methods. In contrast to other works, this thesis looks at both the long-term and short-term impact that different behaviours have on the electricity market by using these state-of-the-art methods.

One goal of general intelligence is to learn novel information without overwriting prior learning. The utility of learning without forgetting (CF) is twofold: first, the system can return to previously learned tasks after learning something new. In addition, bootstrapping previous knowledge may allow for faster learning of a novel task. Previous approaches to CF and bootstrapping are primarily based on modifying learning in the form of changing weights to tune the model to the current task, overwriting previously tuned weights from previous tasks. However, another critical factor that has been largely overlooked is the initial network topology, or architecture. Here, we argue that the topology of biological brains likely evolved certain features that are designed to achieve this kind of informational conservation. In particular, we consider that the highly conserved property of modularity may offer a solution to weight-update learning methods that adheres to the learning without catastrophic forgetting and bootstrapping constraints. Final considerations are then made on how to combine these two learning objectives in a dynamical, general learning system.

Power transformer is an essential component for the stable and reliable operation of electrical power grid. The traditional diagnostic methods based on dissolved gas analysis (DGA) have been used to identify the power transformer faults. However, the application of these methods is limited due to the low accuracy of fault identification. In this paper, a transformer fault diagnosis system is developed based on the combination of an improved genetic algorithm (IGA) and the XGBoost. In the transformer fault diagnosis system, the improved genetic algorithm is employed to pre-select the input features from the DGA data and optimize the XGBoost classifier. Performance measures such as average unfitness value, likelihood of evolution leap, and likelihood of optimality are used to validate the efficacy of the proposed improved genetic algorithm. The results of simulation experiments show that the improved genetic algorithm can get the optimal solution stably and reliably, and the proposed method improves the average accuracy of transformer fault diagnosis to 99.2\%. Compared to IEC ratios, dual triangle, support vector machine (SVM), and common vector approach (CVA), the diagnostic accuracy of the proposed method is improved by 30.2\%, 47.2\%, 11.2\%, and 3.6\%, respectively. The proposed method can be a potential solution to identify the transformer fault types.

The expansion of Fiber-To-The-Home (FTTH) networks creates high costs due to expensive excavation procedures. Optimizing the planning process and minimizing the cost of the earth excavation work therefore lead to large savings. Mathematically, the FTTH network problem can be described as a minimum Steiner Tree problem. Even though the Steiner Tree problem has already been investigated intensively in the last decades, it might be further optimized with the help of new computing paradigms and emerging approaches. This work studies upcoming technologies, such as Quantum Annealing, Simulated Annealing and nature-inspired methods like Evolutionary Algorithms or slime-mold-based optimization. Additionally, we investigate partitioning and simplifying methods. Evaluated on several real-life problem instances, we could outperform a traditional, widely-used baseline (NetworkX Approximate Solver) on most of the domains. Prior partitioning of the initial graph and the presented slime-mold-based approach were especially valuable for a cost-efficient approximation. Quantum Annealing seems promising, but was limited by the number of available qubits.

The ability to optimize multiple competing objective functions with high sample efficiency is imperative in many applied problems across science and industry. Multi-objective Bayesian optimization (BO) achieves strong empirical performance on such problems, but even with recent methodological advances, it has been restricted to simple, low-dimensional domains. Most existing BO methods exhibit poor performance on search spaces with more than a few dozen parameters. In this work we propose MORBO, a method for multi-objective Bayesian optimization over high-dimensional search spaces. MORBO performs local Bayesian optimization within multiple trust regions simultaneously, allowing it to explore and identify diverse solutions even when the objective functions are difficult to model globally. We show that MORBO significantly advances the state-of-the-art in sample-efficiency for several high-dimensional synthetic and real-world multi-objective problems, including a vehicle design problem with 222 parameters, demonstrating that MORBO is a practical approach for challenging and important problems that were previously out of reach for BO methods.

This paper presents a genetic algorithm by adopting the Pareto principle that is called GAP2WSS for selecting a Web service for each task of a composite Web service from a pool of candidate Web services. In contrast to the existing approaches, all global QoS constraints, interservice constraints, and transactional constraints are considered simultaneously. At first, all candidate Web services are scored and ranked per each task using the proposed mechanism. Then, the top 20 percent of the candidate Web services of each task are considered as the candidate Web services of the corresponding task to reduce the problem search space. Finally, the Web service selection problem is solved by focusing only on these 20 percent candidate Web services of each task using a genetic algorithm. Empirical studies demonstrate this approach leads to a higher efficiency and efficacy as compared with the case that all the candidate Web services are considered in solving the problem.

Multicomponent problems are hard to solve as each component has the potential to influence the feasibility as well as the quality of the other components [4]. Among the studied multi-component problems, vehicle routing problems with loading constraints [15] appear to be very frequently investigated. In these problems, tour are to be created for vehicles while constraints and aims of specific loading policies must be taken into account. One of these problems is the Traveling Thief Problem (TTP), which combines two classic well-known and well-studied problems: the Knapsack Problem (KP) and the Traveling Salesman Problem (TSP). The TTP was proposed in 2013 by Bonyadi et al. [3] in order to provide an academic abstraction of multi-component problems for the scientific community. In the TTP, a thief travels across all cities (TSP component) and steals items along the way (KP component).

Segmentation is an essential requirement in medicine when digital images are used in illness diagnosis, especially, in posterior tasks as analysis and disease identification. An efficient segmentation of brain Magnetic Resonance Images (MRIs) is of prime concern to radiologists due to their poor illumination and other conditions related to de acquisition of the images. Thresholding is a popular method for segmentation that uses the histogram of an image to label different homogeneous groups of pixels into different classes. However, the computational cost increases exponentially according to the number of thresholds. In this paper, we perform the multi-level thresholding using an evolutionary metaheuristic. It is an improved version of the Harris Hawks Optimization (HHO) algorithm that combines the chaotic initialization and the concept of altruism. Further, for fitness assignment, we use a hybrid objective function where along with the cross-entropy minimization, we apply a new entropy function, and leverage weights to the two objective functions to form a new hybrid approach. The HHO was originally designed to solve numerical optimization problems. Earlier, the statistical results and comparisons have demonstrated that the HHO provides very promising results compared with well-established metaheuristic techniques. In this article, the altruism has been incorporated into the HHO algorithm to enhance its exploitation capabilities. We evaluate the proposed method over 10 benchmark images from the WBA database of the Harvard Medical School and 8 benchmark images from the Brainweb dataset using some standard evaluation metrics.

Deep Learning (DL) components are routinely integrated into software systems that need to perform complex tasks such as image or natural language processing. The adequacy of the test data used to test such systems can be assessed by their ability to expose artificially injected faults (mutations) that simulate real DL faults. In this paper, we describe an approach to automatically generate new test inputs that can be used to augment the existing test set so that its capability to detect DL mutations increases. Our tool DeepMetis implements a search based input generation strategy. To account for the non-determinism of the training and the mutation processes, our fitness function involves multiple instances of the DL model under test. Experimental results show that \tool is effective at augmenting the given test set, increasing its capability to detect mutants by 63% on average. A leave-one-out experiment shows that the augmented test set is capable of exposing unseen mutants, which simulate the occurrence of yet undetected faults.