Abstract-- Wheeled bipedal robots are emerging as flexible platforms for field exploration. However, head instability induced by uneven terrain can degrade the accuracy of onboard sensors (e.g., cameras) or damage fragile payloads. Existing research primarily focuses on stabilizing the mobile platform but overlooks active stabilization of the head in the world frame, resulting in vertical oscillations that undermine overall stability. T o address this challenge, we developed a model-based ground force estimation method for our 6-degree-of-freedom (6-DOF) wheeled bipedal robot. Leveraging these force estimates, we implemented an admittance control algorithm to enhance terrain adaptability. I. INTRODUCTION As robotics technology advances, wheeled bipedal robots are being increasingly deployed for agile exploration [1].

Abstract-- Ultraviolet (UV) germicidal radiation is an established non-contact method for surface disinfection in medical environments. Traditional approaches require substantial human intervention to define disinfection areas, complicating automation, while deep learning-based methods often need extensive fine-tuning and large datasets, which can be impractical for large-scale deployment. Additionally, these methods often do not address scene understanding for partial surface disinfection, which is crucial for avoiding unintended UV exposure. We propose a solution that leverages foundation models to simplify surface selection for manipulator-based UV disinfection, reducing human involvement and removing the need for model training. Additionally, we propose a VLM-assisted segmentation refinement to detect and exclude thin and small non-target objects, showing that this reduces mis-segmentation errors. Our approach achieves over 92% success rate in correctly segmenting target and non-target surfaces, and real-world experiments with a manipulator and simulated UV light demonstrate its practical potential for real-world applications. The use of ultraviolet (UV) germicidal radiation as a non-contact approach for disinfection is well known and there is ample research in recent years that have proven their effectiveness to sterilise surfaces in medical environments [1, 2], especially since the COVID-19 pandemic.

Abstract--General Visual Inspection is a manual inspection process regularly used to detect and localise obvious damage on the exterior of commercial aircraft. There has been increasing demand to perform this process at the boarding gate to minimise the downtime of the aircraft and automating this process is desired to reduce the reliance on human labour . Automating this typically requires estimating a camera's pose with respect to the aircraft for initialisation but most existing localisation methods require infrastructure, which is very challenging in uncontrolled outdoor environments and within the limited turnover time (approximately 2 hours) on an airport tarmac. Additionally, many airlines and airports do not allow contact with the aircraft's surface or using UA Vs for inspection between flights, and restrict access to commercial aircraft. Hence, this paper proposes an on-site method that is infrastructure-free and easy to deploy for estimating a pan-tilt-zoom camera's pose and localising scan images. This method initialises using the same pan-tilt-zoom camera used for the inspection task by utilising a Deep Convolutional Neural Network fine-tuned on only synthetic images to predict its own pose. We apply domain randomisation to generate the dataset for fine-tuning the network and modify its loss function by leveraging aircraft geometry to improve accuracy. We also propose a workflow for initialisation, scan path planning, and precise localisation of images captured from a pan-tilt-zoom camera. We evaluate and demonstrate our approach through experiments with real aircraft, achieving root-mean-square camera pose estimation errors of less than 0.24 m and 2 for all real scenes. General Visual Inspection (GVI) is a widely used technique as part of regular inspections of aircraft such as during pre-flight inspections on an airport tarmac or during maintenance usually performed in a hanger. This process involves visual examinations of the aircraft's exterior for noticeable damage or irregularities and provides a means for early detection of typical air-frame defects [2].

Abstract--This paper presents the design, implementation, and evolution of a comprehensive multimodal room monitoring system that integrates synchronized video and audio processing for real-time activity recognition and anomaly detection. We describe two iterations of the system: an initial lightweight implementation using YOLOv8, ByteTrack, and Audio Spectrogram Transformer (AST), and an advanced version incorporating multi-model audio ensembles, hybrid object detection, bidirectional cross-modal attention, and multi-method anomaly detection. The evolution demonstrates significant improvements in accuracy, robustness, and industrial applicability. The advanced system combines three audio models (AST, Wav2V ec2, HuBERT) for comprehensive audio understanding, dual object detectors (YOLO and DETR) for improved accuracy, and sophisticated fusion mechanisms for enhanced cross-modal learning. Experimental evaluation shows the system's effectiveness in both general monitoring scenarios and specialized industrial safety applications, achieving real-time performance on standard hardware while maintaining high accuracy. The increasing demand for intelligent monitoring systems in smart homes, security applications, healthcare facilities, and industrial environments has driven significant research into multimodal perception systems. Traditional single-modality approaches, whether relying solely on visual or audio information, often fail to capture the complete context of activities and events. Visual systems may miss audio cues that provide crucial context, while audio-only systems lack spatial understanding. This paper presents a comprehensive journey through the development of a multimodal room monitoring system, documenting both an initial lightweight implementation and its evolution into an advanced industrial-grade solution.

This report presents the Empathetic Cascading Networks (ECN) framework, a multi-stage prompting method designed to enhance the empathetic and inclusive capabilities of large language models. ECN employs four stages: Perspective Adoption, Emotional Resonance, Reflective Understanding, and Integrative Synthesis, to guide models toward generating emotionally resonant and contextually aware responses. Experimental results demonstrate that ECN achieves the highest Empathy Quotient (EQ) scores across GPT-3.5-turbo and GPT-4, while maintaining competitive Regard and Perplexity metrics. These findings emphasize ECN's potential for applications requiring empathy and inclusivity in conversational AI.

Abstract-- Accurate localization is essential for marine robotics, yet Global Navigation Satellite System (GNSS) signals are unreliable or unavailable even at a very short distance below the water surface. Traditional alternatives, such as inertial navigation, Doppler V elocity Loggers (DVL), SLAM, and acoustic methods, suffer from error accumulation, high computational demands, or infrastructure dependence. In this work, we present a scalable multi-drone GNSS-based tracking system for surface and near-surface marine robots. Our approach combines efficient visual detection, lightweight multi-object tracking, GNSS-based triangulation, and a confidence-weighted Extended Kalman Filter (EKF) to provide stable GNSS estimation in real time. We further introduce a cross-drone tracking ID alignment algorithm that enforces global consistency across views, enabling robust multi-robot tracking with redundant aerial coverage. We validate our system in diversified complex settings to show the scalability and robustness of the proposed algorithm. While satellite-based positioning is widely accepted for surface marine robots, its effectiveness diminishes once the robots descend even a very short distance below the ocean surface or if the antenna is wet with salt water.

Current vision-language models (VLMs) in medicine are primarily designed for categorical question answering (e.g., "Is this normal or abnormal?") or qualitative descriptive tasks. However, clinical decision-making often relies on quantitative assessments, such as measuring the size of a tumor or the angle of a joint, from which physicians draw their own diagnostic conclusions. This quantitative reasoning capability remains underexplored and poorly supported in existing VLMs. In this work, we introduce MedVision, a large-scale dataset and benchmark specifically designed to evaluate and improve VLMs on quantitative medical image analysis. MedVision spans 22 public datasets covering diverse anatomies and modalities, with 30.8 million image-annotation pairs. We focus on three representative quantitative tasks: (1) detection of anatomical structures and abnormalities, (2) tumor/lesion (T/L) size estimation, and (3) angle/distance (A/D) measurement. Our benchmarks show that current off-the-shelf VLMs perform poorly on these tasks. However, with supervised fine-tuning on MedVision, we significantly enhance their performance across detection, T/L estimation, and A/D measurement, demonstrating reduced error rates and improved precision. This work provides a foundation for developing VLMs with robust quantitative reasoning capabilities in medical imaging. Code and data are available at https://medvision-vlm.github.io.

The KV cache is a dominant memory bottleneck for LLM inference. While 4-bit KV quantization preserves accuracy, 2-bit often degrades it, especially on long-context reasoning. We close this gap via an algorithm-system co-design for mixed-precision KV caching: Kitty. On the algorithm side, extensive experiments show that Dynamic Channel-wise Precision Boost -- which ranks Key-cache channels by sensitivity and keeps only a small fraction at higher precision -- maintains near-zero loss in accuracy drop while approaching 2-bit memory. The main challenge is handling dynamic 4-bit channel boosts while keeping the page layout coalesced and the dequantization uniform, with no scattered reads or hard-coded masks. Kitty addresses these issues by decompose each mixed-precision Key page into two tensors with unified 2-bit precision. Based on this, Kitty provides a page-centric KV layout, Triton-compatible page dequantization kernels, and a lightweight runtime pipeline that preserves coalescing and avoids divergence. Across seven tasks and two model families (Qwen3, LLaMA3), Kitty cuts KV memory by nearly 8x with negligible accuracy loss, enabling up to 8x larger batches and 2.1x-4.1x higher throughput under the same memory budget. We release the full implementation of Kitty at https://github.com/Summer-Summer/Kitty.

Frontier artificial intelligence (AI) models, such as OpenAI's GPT-5 and Meta's DINOv3, have advanced rapidly through training on internet-scale public data, yet such systems lack access to private clinical data. Neuroimaging, in particular, is underrepresented in the public domain due to identifiable facial features within MRI and CT scans, fundamentally restricting model performance in clinical medicine. Here, we show that frontier models underperform on neuroimaging tasks and that learning directly from uncurated data generated during routine clinical care at health systems, a paradigm we call health system learning, yields high-performance, generalist neuroimaging models. We introduce NeuroVFM, a visual foundation model trained on 5.24 million clinical MRI and CT volumes using a scalable volumetric joint-embedding predictive architecture. NeuroVFM learns comprehensive representations of brain anatomy and pathology, achieving state-of-the-art performance across multiple clinical tasks, including radiologic diagnosis and report generation. The model exhibits emergent neuroanatomic understanding and interpretable visual grounding of diagnostic findings. When paired with open-source language models through lightweight visual instruction tuning, NeuroVFM generates radiology reports that surpass frontier models in accuracy, clinical triage, and expert preference. Through clinically grounded visual understanding, NeuroVFM reduces hallucinated findings and critical errors, offering safer clinical decision support. These results establish health system learning as a paradigm for building generalist medical AI and provide a scalable framework for clinical foundation models.

Recent advances in large language models made it possible to achieve high conversational performance with substantially reduced computational demands, enabling practical on-site deployment in clinical environments. Such progress allows for local integration of AI systems that uphold strict data protection and patient privacy requirements, yet their secure implementation in medicine necessitates careful consideration of ethical, regulatory, and technical constraints. In this study, we introduce MedChat, a locally deployable virtual physician framework that integrates an LLM-based medical chatbot with a diffusion-driven avatar for automated and structured anamnesis. The chatbot was fine-tuned using a hybrid corpus of real and synthetically generated medical dialogues, while model efficiency was optimized via Low-Rank Adaptation. A secure and isolated database interface was implemented to ensure complete separation between patient data and the inference process. The avatar component was realized through a conditional diffusion model operating in latent space, trained on researcher video datasets and synchronized with mel-frequency audio features for realistic speech and facial animation. Unlike existing cloud-based systems, this work demonstrates the feasibility of a fully offline, locally deployable LLM-diffusion framework for clinical anamnesis. The autoencoder and diffusion networks exhibited smooth convergence, and MedChat achieved stable fine-tuning with strong generalization to unseen data. The proposed system thus provides a privacy-preserving, resource-efficient foundation for AI-assisted clinical anamnesis, also in low-cost settings.