Future 6G networks are envisioned to facilitate edge-assisted mobile augmented reality (MAR) via strengthening the collaboration between MAR devices and edge servers. In order to provide immersive user experiences, MAR devices must timely upload camera frames to an edge server for simultaneous localization and mapping (SLAM)-based device pose tracking. In this paper, to cope with user-specific and non-stationary uplink data traffic, we develop a digital twin (DT)-based approach for user-centric communication service provision for MAR. Specifically, to establish DTs for individual MAR devices, we first construct a data model customized for MAR that captures the intricate impact of the SLAM-based frame uploading mechanism on the user-specific data traffic pattern. We then define two DT operation functions that cooperatively enable adaptive switching between different data-driven models for capturing non-stationary data traffic. Leveraging the user-oriented data management introduced by DTs, we propose an algorithm for network resource management that ensures the timeliness of frame uploading and the robustness against inherent inaccuracies in data traffic modeling for individual MAR devices. Trace-driven simulation results demonstrate that the user-centric communication service provision achieves a 14.2% increase in meeting the camera frame uploading delay requirement in comparison with the slicing-based communication service provision widely used for 5G.

Dynamic resource allocation in heterogeneous wireless networks (HetNets) is challenging for traditional methods under varying user loads and channel conditions. We propose a deep reinforcement learning (DRL) framework that jointly optimises transmit power, bandwidth, and scheduling via a multi-objective reward balancing throughput, energy efficiency, and fairness. Using real base station coordinates, we compare Proximal Policy Optimisation (PPO) and Twin Delayed Deep Deterministic Policy Gradient (TD3) against three heuristic algorithms in multiple network scenarios. Our results show that DRL frameworks outperform heuristic algorithms in optimising resource allocation in dynamic networks. These findings highlight key trade-offs in DRL design for future HetNets.

We investigate the problem of computing the top-$k$ simple shortest paths in weighted digraphs. While the single-pair variant -- finding the top-$k$ simple shortest paths between two specified vertices -- has been extensively studied over the past decades, with Yen's algorithm and its heuristic improvements emerging as the most effective solving strategies, relatively little attention has been devoted to the more general single-source version, where the goal is determining top-$k$ simple shortest paths from a source vertex to all other vertices. Motivated by the numerous practical applications of ranked shortest paths, in this paper we provide new insights and algorithmic contributions to this problem. In particular, we first present a theoretical characterization of the structural properties of its solutions. Then, we introduce the first polynomial-time algorithm specifically designed to handle it. On the one hand, we prove our new algorithm is on par, in terms of time complexity, with the best (and only) polynomial-time approach known in the literature to solve the problem, that is applying the fastest single-pair algorithm independently to each vertex pair formed by the source and the remaining vertices. On the other hand, through an extensive experimental evaluation on both real-world and synthetic graphs, we demonstrate that our algorithm consistently and significantly outperforms the latter baseline in terms of running time, achieving speed-ups of up to several orders of magnitude. These results establish our new algorithm as the solution to be preferred for computing $k$ simple shortest paths from a single source in practical settings.

Abstract--Cellular wireless systems are witnessing the proliferation of frequency bands over a wide spectrum, particularly with the expansion of new bands in FR3. These bands must be supported in user equipment (UE) handsets with multiple antennas in a constrained form factor . Rapid variations in channel quality across the bands from motion and hand blockage, limited field-of-view of antennas, and hardware and power-constrained measurement sparsity pose significant challenges to reliable multi-band channel tracking. This paper formulates the problem of predicting achievable rates across multiple antenna arrays and bands with sparse historical measurements. We propose a transformer-based neural architecture that takes asynchronous rate histories as input and outputs per-array rate predictions. Evaluated on ray-traced simulations in a dense urban micro-cellular setting with FR1 and FR3 arrays, our method demonstrates superior performance over baseline predictors, enabling more informed band selection under realistic mobility and hardware constraints.

Attentional Neural Network is a new framework that integrates top-down cognitive bias and bottom-up feature extraction in one coherent architecture. The top-down influence is especially effective when dealing with high noise or difficult segmentation problems. Our system is modular and extensible. It is also easy to train and cheap to run, and yet can accommodate complex behaviors. We obtain classification accuracy better than or competitive with state of art results on the MNIST variation dataset, and successfully disentangle overlaid digits with high success rates. We view such a general purpose framework as an essential foundation for a larger system emulating the cognitive abilities of the whole brain.

The deployment of unmanned aerial vehicle (UAV) swarm-assisted communication networks has become an increasingly vital approach for remediating coverage limitations in infrastructure-deficient environments, with especially pressing applications in temporary scenarios, such as emergency rescue, military and security operations, and remote area coverage. However, complex geographic environments lead to unpredictable and highly dynamic wireless channel conditions, resulting in frequent interruptions of air-to-ground (A2G) links that severely constrain the reliability and quality of service in UAV swarm-assisted mobile communications. To improve the quality of UAV swarm-assisted communications in complex geographic environments, we propose an integrated communication and control co-design mechanism. Given the stringent energy constraints inherent in UAV swarms, our proposed mechanism is designed to optimize energy efficiency while maintaining an equilibrium between equitable communication rates for mobile ground users (GUs) and UAV energy expenditure. We formulate the joint resource allocation and 3D trajectory control problem as a Markov decision process (MDP), and develop a multi-agent reinforcement learning (MARL) framework to enable real-time coordinated actions across the UAV swarm. To optimize the action policy of UAV swarms, we propose a novel multi-agent hybrid proximal policy optimization with action masking (MAHPPO-AM) algorithm, specifically designed to handle complex hybrid action spaces. The algorithm incorporates action masking to enforce hard constraints in high-dimensional action spaces. Experimental results demonstrate that our approach achieves a fairness index of 0.99 while reducing energy consumption by up to 25% compared to baseline methods.

Deploying Large Language Models (LLMs) on mobile devices faces the challenge of insufficient performance in smaller models and excessive resource consumption in larger ones. This paper highlights that mobile Neural Processing Units (NPUs) have underutilized computational resources, particularly their matrix multiplication units, during typical LLM inference. To leverage this wasted compute capacity, we propose applying parallel test-time scaling techniques on mobile NPUs to enhance the performance of smaller LLMs. However, this approach confronts inherent NPU challenges, including inadequate hardware support for fine-grained quantization and low efficiency in general-purpose computations. To overcome these, we introduce two key techniques: a hardware-aware tile quantization scheme that aligns group quantization with NPU memory access patterns, and efficient LUT-based replacements for complex operations such as Softmax and dequantization. We design and implement an end-to-end inference system that leverages the NPU's compute capability to support test-time scaling on Qualcomm Snapdragon platforms. Experiments show our approach brings significant speedups: up to 19.0 for mixed-precision GEMM and 2.2 for Softmax. More importantly, we demonstrate that smaller models using test-time scaling can match or exceed the accuracy of larger models, achieving a new performance-cost Pareto frontier.

In WSN/IoT, node localization is essential to long-running applications for accurate environment monitoring and event detection, often covering a large area in the field. Due to the lower time resolution of typical WSN/IoT platforms (e.g., 1 microsecond on ESP32 platforms) and the jitters in timestamping, packet-level localization techniques cannot provide meter-level resolution. For high-precision localization as well as world-wide interoperability via 2.4-GHz ISM band, a new variant of LoRa, called LoRa 2.4 GHz, was proposed by semtech, which provides a radio frequency (RF) time of flight (ToF) ranging method for meter-level localization. However, the existing datasets reported in the literature are limited in their coverages and do not take into account varying environmental factors such as temperature and humidity. To address these issues, LoRa 2.4 GHz RF ToF ranging data was collected on a sports field at the XJTLU south campus, where three LoRa nodes logged samples of ranging with a LoRa base station, together with temperature and humidity, at reference points arranged as a 3x3 grid covering 400 square meter over three weeks and uploaded all measurement records to the base station equipped with an ESP32-based transceiver for machine and user communications. The results of a preliminary investigation based on a simple deep neural network (DNN) model demonstrate that the environmental factors, including the temperature and humidity, significantly affect the accuracy of ranging, which calls for advanced methods of compensating for the effects of environmental factors on LoRa RF ToF ranging outdoors.

Abstract--The Sixth-Generation (6G) network envisions pervasive artificial intelligence (AI) as a core goal, enabled by edge intelligence through on-device data utilization. T o realize this vision, federated learning (FL) has emerged as a key paradigm for collaborative training across edge devices. However, the sensitivity and heterogeneity of edge data pose key challenges to FL: parameter sharing risks data reconstruction, and a unified global model struggles to adapt to diverse local distributions. In this paper, we propose a novel federated learning framework that integrates personalized differential privacy (DP) and adaptive model design. T o protect training data, we leverage sample-level representations for knowledge sharing and apply a personalized DP strategy to resist reconstruction attacks. T o ensure distribution-aware adaptation under privacy constraints, we develop a privacy-aware neural architecture search (NAS) algorithm that generates locally customized architectures and hyperparameters. T o the best of our knowledge, this is the first personalized DP solution tailored for representation-based FL with theoretical convergence guarantees. Our scheme achieves strong privacy guarantees for training data while significantly outperforming state-of-the-art methods in model performance. Experiments on benchmark datasets such as CIF AR-10 and CIF AR-100 demonstrate that our scheme improves accuracy by 6.82% over the federated NAS method PerFedRLNAS, while reducing model size to 1/10 and communication cost to 1/20. CCORDING to the International Telecommunication Union (ITU), the Sixth-Generation (6G) mobile communication network are expected to fundamentally reshape current network architectures [1]. This transformation will be driven by an unprecedented degree of connectivity. These edge devices--such as smartphones, wearables, and sensors--will continuously generate vast volumes of local data. These data, rich in contextual information and latent intelligence, are key enablers for delivering efficient and responsive artificial intelligent (AI) services. Nowadays, the utilization of data generated at the edge is still significantly limited in the Fifth-Generation mobile communication system (5GS). Y ang Lv is with the School of Cyber Engineering, Xidian University, Xi'an, China (e-mail: lyuyang@stu.xidian.edu.cn).

Abstract--Intent-Based Networking (IBN) aims to simplify network management by enabling users to specify high-level goals that drive automated network design and configuration. However, translating informal natural-language intents into formally correct optical network topologies remains challenging due to inherent ambiguity and lack of rigor in Large Language Models (LLMs). T o address this, we propose a novel hybrid pipeline that integrates LLM-based intent parsing, formal methods, and Optical Retrieval-Augmented Generation (RAG). By enriching design decisions with domain-specific optical standards and systematically incorporating symbolic reasoning and verification techniques, our pipeline generates explainable, verifiable, and trustworthy optical network designs. Intent-Based Networking (IBN) simplifies network management by allowing users to express high-level objectives--such as connectivity, performance, or security--without specifying implementation details [1], [2]. Standardization bodies like TM Forum and the Internet Engineering Task Force define intent as a declarative statement of desired outcomes, delegating the detailed configuration and implementation tasks to automated systems. By abstracting away low-level complexities, IBN significantly reduces operational overhead, human error, and management complexity [2]. Existing research predominantly explores intent translation into configurations or incremental topology adjustments [3], [4], but largely overlooks the initial phase of comprehensive network design, particularly for optical networks. Poor initial design decisions can lead to significant performance degradation or expensive reconfigurations throughout the operational lifecycle [5], [6].