Abstract--Airborne Base Stations (ABSs) allow for flexible geographical allocation of network resources with dynamically changing load as well as rapid deployment of alternate connectivity solutions during natural disasters. Since the radio infrastructure is carried by unmanned aerial vehicles (UA Vs) with limited flight time, it is important to establish the best location for the ABS without exhaustive field trials. This paper proposes a digital twin (DT)-guided approach to achieve this goal through the following key contributions: (i) Implementation of an interactive software bridge between two open-source DTs such that the same scene is evaluated with high fidelity across NVIDIA's Sionna and Aerial Omniverse Digital Twin (AODT), highlighting the unique features of each of these platforms for this allocation problem, (ii) Design of a back-propagation-based algorithm in Sionna for rapidly converging on the physical location of the UA Vs, orientation of the antennas and transmit power to ensure efficient coverage across the swarm of the UA Vs, and (iii) numerical evaluation in AODT for large network scenarios (50 UEs, 10 ABS) that identifies the environmental conditions in which there is agreement or divergence of performance results between these twins. Finally, (iv) we propose a resilience mechanism to provide consistent coverage to mission-critical devices and demonstrate a use case for bi-directional flow of information between the two DTs. Unmanned Aerial V ehicle (UA V)-mounted Base Stations, or Airborne Base Stations (ABSs), have gained significant attention as a complement to ground-based cellular networks [1]. As UA Vs become more accessible, their ability to navigate 3-dimensional (3D) space provides flexibility in adapting to dynamic network demands [2], [3], enabling line-of-sight links to mission-critical units [4] and enhancing user tracking [5]. However, ABS-enabled connectivity introduces challenges such as collision avoidance, coordinated coverage, and optimal placement, considering limited flight times of 20 to 100 minutes [6]. These challenges are highly dependent on the RF propagation environment, making prior channel knowledge essential for effective network planning. Motivation for Digital Twins: Optimal placement of Base Stations (BSs) is traditionally handled by telecom operators relying on domain knowledge and best practices. Digital Twins (DTs) and, specifically, Digital Twins for Networking (DTNs) [7], have emerged as strategic tools for network simulation, performance analysis, and "what-if" scenarios.

With the increasing presence of dynamic scenarios, such as Vehicle-to-Vehicle communications, radio propagation modeling tools must adapt to the rapidly changing nature of the radio channel. Recently, both Differentiable and Dynamic Ray Tracing frameworks have emerged to address these challenges. However, there is often confusion about how these approaches differ and which one should be used in specific contexts. In this paper, we provide an overview of these two techniques and a comparative analysis against two state-of-the-art tools: 3DSCAT from UniBo and Sionna from NVIDIA. To provide a more precise characterization of the scope of these methods, we introduce a novel simulation-based metric, the Multipath Lifetime Map, which enables the evaluation of spatial and temporal coherence in radio channels only based on the geometrical description of the environment. Finally, our metrics are evaluated on a classic urban street canyon scenario, yielding similar results to those obtained from measurement campaigns.

Radio frequency (RF) signal mapping, which is the process of analyzing and predicting the RF signal strength and distribution across specific areas, is crucial for cellular network planning and deployment. Traditional approaches to RF signal mapping rely on statistical models constructed based on measurement data, which offer low complexity but often lack accuracy, or ray tracing tools, which provide enhanced precision for the target area but suffer from increased computational complexity. Recently, machine learning (ML) has emerged as a data-driven method for modeling RF signal propagation, which leverages models trained on synthetic datasets to perform RF signal mapping in "unseen" areas. In this paper, we present Geo2SigMap, an ML-based framework for efficient and high-fidelity RF signal mapping using geographic databases. First, we develop an automated framework that seamlessly integrates three open-source tools: OpenStreetMap (geographic databases), Blender (computer graphics), and Sionna (ray tracing), enabling the efficient generation of large-scale 3D building maps and ray tracing models. Second, we propose a cascaded U-Net model, which is pre-trained on synthetic datasets and employed to generate detailed RF signal maps, leveraging environmental information and sparse measurement data. Finally, we evaluate the performance of Geo2SigMap via a real-world measurement campaign, where three types of user equipment (UE) collect over 45,000 data points related to cellular information from six LTE cells operating in the citizens broadband radio service (CBRS) band. Our results show that Geo2SigMap achieves an average root-mean-square-error (RMSE) of 6.04 dB for predicting the reference signal received power (RSRP) at the UE, representing an average RMSE improvement of 3.59 dB compared to existing methods.

Sionna is a GPU-accelerated open-source library for link-level simulations based on TensorFlow. It enables the rapid prototyping of complex communication system architectures and provides native support for the integration of neural networks. Sionna implements a wide breadth of carefully tested state-of-the-art algorithms that can be used for benchmarking and end-to-end performance evaluation. This allows researchers to focus on their research, making it more impactful and reproducible, while saving time implementing components outside their area of expertise. This white paper provides a brief introduction to Sionna, explains its design principles and features, as well as future extensions, such as integrated ray tracing and custom CUDA kernels. We believe that Sionna is a valuable tool for research on next-generation communication systems, such as 6G, and we welcome contributions from our community.