We are grateful for the useful and constructive comments from all anonymous reviewers. We thank the reviewer for the thoughtful comments. Doing so will incur extra time to transfer data from secondary storage to main memory. As a result, the possibility of overfitting is much smaller, which allows for more recycling (exploiting). We thank reviewer for the careful reading.

Amazon Prime Day is live. See the best deals HERE. The drive to save elephants had some unforeseen conservation consequences. Billiard balls were once made of ivory. Breakthroughs, discoveries, and DIY tips sent every weekday.

Abstract--End-of-Life (EoL) phones significantly exacerbate global e-waste challenges due to their high production volumes and short lifecycles. Disassembly is among the most critical processes in EoL phone recycling. However, it relies heavily on human labor due to product variability. Consequently, the manual process is both labor-intensive and time-consuming. In this paper, we propose a low-cost, easily deployable automated and selective disassembly and sorting system for EoL phones, consisting of three subsystems: an adaptive cutting system, a vision-based robotic sorting system, and a battery removal system. The system can process over 120 phones per hour with an average disassembly success rate of 98.9%, efficiently delivering selected high-value components to downstream processing. It provides a reliable and scalable automated solution to the pressing challenge of EoL phone disassembly. Additionally, the automated system can enhance disassembly economics, converting a previously unprofitable process into one that yields a net profit per unit weight of EoL phones. E-waste presents a global challenge due to its rapid growth, high resource value, and the severe environmental and health risks from improper recycling and hazardous substances [1-3]. Global e-waste surged to a record 62 million tonnes in 2022 and is expected to reach 82 million tonnes by 2030 [4]. Recycling converts e-waste components into valuable raw materials, which is critical for addressing the escalating e-waste problem and supporting a sustainable circular economy [5-10]. Nevertheless, only 22.3 % of e-waste was recorded as recycled in 2022 [4]. The high human labor cost and health risk concerns are the major challenges associated with the recycling process [11]. This material is based upon work supported by the REMADE Institute, USA (21-01-RM-5083).

Photo credit: Muntaka Chasant, reproduced under a CC BY-SA 4.0 license. Just outside the historic German town of Goslar, a sprawling industrial complex receives an endless stream of discarded electronics. On arrival, this electronic waste is laboriously prepared for recycling. Electrocycling GmbH is one of the largest e-waste recycling facilities in Europe. Every year, it processes up to 80 000 tonnes of electronic waste, which comes in all shapes and forms.

Robots can identify recyclable materials by recognizing patterns in colors, textures, shapes and logos. Ever wondered what happens to the recyclables you carefully sort and place in your bin? For years, recycling has been a crucial part of our efforts to reduce waste and protect the environment. However, the recycling industry has faced significant challenges, from rising costs to labor shortages. But what if technology could transform this process, making recycling faster, more efficient and actually effective?

Determining protein structures at an atomic level remains a significant challenge in structural biology. We introduce $\texttt{RecCrysFormer}$, a hybrid model that exploits the strengths of transformers with the aim of integrating experimental and ML approaches to protein structure determination from crystallographic data. $\texttt{RecCrysFormer}$ leverages Patterson maps and incorporates known standardized partial structures of amino acid residues to directly predict electron density maps, which are essential for constructing detailed atomic models through crystallographic refinement processes. $\texttt{RecCrysFormer}$ benefits from a ``recycling'' training regimen that iteratively incorporates results from crystallographic refinements and previous training runs as additional inputs in the form of template maps. Using a preliminary dataset of synthetic peptide fragments based on Protein Data Bank, $\texttt{RecCrysFormer}$ achieves good accuracy in structural predictions and shows robustness against variations in crystal parameters, such as unit cell dimensions and angles.

As robotic systems (RS) become more autonomous, they are becoming increasingly used in small spaces and offices to automate tasks such as cleaning, infrastructure maintenance, or resource management. In this paper, we propose iTrash, an intelligent trashcan that aims to improve recycling rates in small office spaces. For that, we ran a 5 day experiment and found that iTrash can produce an efficiency increase of more than 30% compared to traditional trashcans. The findings derived from this work, point to the fact that using iTrash not only increase recyclying rates, but also provides valuable data such as users behaviour or bin usage patterns, which cannot be taken from a normal trashcan. This information can be used to predict and optimize some tasks in these spaces. Finally, we explored the potential of using blockchain technology to create economic incentives for recycling, following a Save-as-you-Throw (SAYT) model.

Autonomous robotic grasping of uncertain objects in uncertain environments is an impactful open challenge for the industries of the future. One such industry is the recycling of Waste Electrical and Electronic Equipment (WEEE) materials, in which electric devices are disassembled and readied for the recovery of raw materials. Since devices may contain hazardous materials and their disassembly involves heavy manual labor, robotic disassembly is a promising venue. However, since devices may be damaged, dirty and unidentified, robotic disassembly is challenging since object models are unavailable or cannot be relied upon. This case study explores grasping strategies for industrial robotic disassembly of WEEE devices with uncertain vision data. We propose three grippers and appropriate tactile strategies for force-based manipulation that improves grasping robustness. For each proposed gripper, we develop corresponding strategies that can perform effectively in different grasping tasks and leverage the grippers design and unique strengths. Through experiments conducted in lab and factory settings for four different WEEE devices, we demonstrate how object uncertainty may be overcome by tactile sensing and compliant techniques, significantly increasing grasping success rates.

Improving the automatic and timely recognition of construction and demolition waste (C&DW) composition is crucial for enhancing business returns, economic outcomes, and sustainability. Technologies like computer vision, artificial intelligence (AI), robotics, and internet of things (IoT) are increasingly integrated into waste processing to achieve these goals. While deep learning (DL) models show promise in recognising homogeneous C&DW piles, few studies assess their performance with mixed, highly contaminated material in commercial settings. Drawing on extensive experience at a C&DW materials recovery facility (MRF) in Sydney, Australia, we explore the challenges and opportunities in developing an advanced automated mixed C&DW management system. We begin with an overview of the evolution of waste management in the construction industry, highlighting its environmental, economic, and societal impacts. We review various C&DW analysis techniques, concluding that DL-based visual methods are the optimal solution. Additionally, we examine the progression of sensor and camera technologies for C&DW analysis as well as the evolution of DL algorithms focused on object detection and material segmentation. We also discuss C&DW datasets, their curation, and innovative methods for their creation. Finally, we share insights on C&DW visual analysis, addressing technical and commercial challenges, research trends, and future directions for mixed C&DW analysis. This paper aims to improve the efficiency of C&DW management by providing valuable insights for ongoing and future research and development efforts in this critical sector.