Underwater structures that can change their shapes dynamically, the way fish do, push through water much more efficiently than conventional rigid hulls. But constructing deformable devices that can change the curve of their body shapes while maintaining a smooth profile is a long and difficult process. MIT's RoboTuna, for example, was composed of about 3,000 different parts and took about two years to design and build. Now, researchers at MIT and their colleagues--including one from the original RoboTuna team--have come up with an innovative approach to building deformable underwater robots, using simple repeating substructures instead of unique components. The team has demonstrated the new system in two different example configurations, one like an eel and the other a wing-like hydrofoil.

Underwater structures that can change their shapes dynamically, the way fish do, push through water much more efficiently than conventional rigid hulls. But constructing deformable devices that can change the curve of their body shapes while maintaining a smooth profile is a long and difficult process. MIT's RoboTuna, for example, was composed of about 3,000 different parts and took about two years to design and build. Now, researchers at MIT and their colleagues -- including one from the original RoboTuna team -- have come up with an innovative approach to building deformable underwater robots, using simple repeating substructures instead of unique components. The team has demonstrated the new system in two different example configurations, one like an eel and the other a wing-like hydrofoil.

Massachusetts Institute of Technology (MIT) researchers are building swarms of tiny robots that have a built-in intelligence, allowing them to build structures, vehicles, or even larger versions of themselves. The subunit of the robot, which is being developed at MIT's Center for Bits and Atoms, is called a voxel and is capable of carrying power and data. "When we're building these structures, you have to build in intelligence," MIT Professor and CBA Director Neil Gershenfeld said in a statement. "What emerged was the idea of structural electronics -- of making voxels that transmit power and data as well as force." Each individual'voxel' is not only a building block, but is also loaded with power and data that give it the power to work with other units during assembly.

The new work, from MIT's Center for Bits and Atoms (CBA), builds on years of research, including recent studies demonstrating that objects such as a deformable airplane wing and a functional racing car could be assembled from tiny identical lightweight pieces -- and that robotic devices could be built to carry out some of this assembly work. Now, the team has shown that both the assembler bots and the components of the structure being built can all be made of the same subunits, and the robots can move independently in large numbers to accomplish large-scale assemblies quickly. The new work is reported in the journal Nature Communications Engineering, in a paper by CBA doctoral student Amira Abdel-Rahman, Professor and CBA Director Neil Gershenfeld, and three others. A fully autonomous self-replicating robot assembly system capable of assembling larger structures, including larger robots, and planning the best construction sequence is still years away, Gershenfeld says. But the new work makes important strides toward that goal, including working out the complex tasks of when to build more robots and how big to make them, as well as how to organize swarms of bots of different sizes to build a structure efficiently without crashing into each other.

Researchers at MIT have made significant steps toward creating robots that could practically and economically assemble nearly anything, including things much larger than themselves, from vehicles to buildings to larger robots. The new system involves large, usable structures built from an array of tiny identical subunits called voxels (the volumetric equivalent of a 2-D pixel). Researchers at MIT have made significant steps toward creating robots that could practically and economically assemble nearly anything, including things much larger than themselves, from vehicles to buildings to larger robots. The new work, from MIT's Center for Bits and Atoms (CBA), builds on years of research, including recent studies demonstrating that objects such as a deformable airplane wing and a functional racing car could be assembled from tiny identical lightweight pieces -- and that robotic devices could be built to carry out some of this assembly work. Now, the team has shown that both the assembler bots and the components of the structure being built can all be made of the same subunits, and the robots can move independently in large numbers to accomplish large-scale assemblies quickly.

Researchers at MIT's Center for Bits and Atoms have created tiny building blocks that exhibit a variety of unique mechanical properties, such as the ability to produce a twisting motion when squeezed. These subunits could potentially be assembled by tiny robots into a nearly limitless variety of objects with built-in functionality, including vehicles, large industrial parts, or specialized robots that can be repeatedly reassembled in different forms. The researchers created four different types of these subunits, called voxels (a 3D variation on the pixels of a 2D image). Each voxel type exhibits special properties not found in typical natural materials, and in combination they can be used to make devices that respond to environmental stimuli in predictable ways. Examples might include airplane wings or turbine blades that respond to changes in air pressure or wind speed by changing their overall shape. The findings, which detail the creation of a family of discrete "mechanical metamaterials," are described in a paper published in the journal Science Advances, authored by recent MIT doctoral graduate Benjamin Jenett PhD '20, Professor Neil Gershenfeld, and four others.

Today's commercial aircraft are typically manufactured in sections, often in different locations -- wings at one factory, fuselage sections at another, tail components somewhere else -- and then flown to a central plant in huge cargo planes for final assembly. But what if the final assembly was the only assembly, with the whole plane built out of a large array of tiny identical pieces, all put together by an army of tiny robots? That's the vision that graduate student Benjamin Jenett, working with Professor Neil Gershenfeld in MIT's Center for Bits and Atoms (CBA), has been pursuing as his doctoral thesis work. It's now reached the point that prototype versions of such robots can assemble small structures and even work together as a team to build up a larger assemblies. The new work appears in the October issue of the IEEE Robotics and Automation Letters, in a paper by Jenett, Gershenfeld, fellow graduate student Amira Abdel-Rahman, and CBA alumnus Kenneth Cheung SM '07, PhD '12, who is now at NASA's Ames Research Center, where he leads the ARMADAS project to design a lunar base that could be built with robotic assembly.

Today's commercial aircraft are typically manufactured in sections, often in different locations--wings at one factory, fuselage sections at another, tail components somewhere else--and then flown to a central plant in huge cargo planes for final assembly. But what if the final assembly was the only assembly, with the whole plane built out of a large array of tiny identical pieces, all put together by an army of tiny robots? That's the vision that graduate student Benjamin Jenett, working with Professor Neil Gershenfeld in MIT's Center for Bits and Atoms (CBA), has been pursuing as his doctoral thesis work. It's now reached the point that prototype versions of such robots can assemble small structures and even work together as a team to build up a larger assemblies. The new work appears in the October issue of the IEEE Robotics and Automation Letters, in a paper by Jenett, Gershenfeld, fellow graduate student Amira Abdel-Rahman, and CBA alumnus Kenneth Cheung SM '07, Ph.D. '12, who is now at NASA's Ames Research Center, where he leads the ARMADAS project to design a lunar base that could be built with robotic assembly. "This paper is a treat," says Aaron Becker, an associate professor of electrical and computer engineering at the University of Houston, who was not associated with this work.

But what if the final assembly was the only assembly, with the whole plane built out of a large array of tiny identical pieces, all put together by an army of tiny robots? That's the vision that graduate student Benjamin Jenett, working with Professor Neil Gershenfeld in MIT's Center for Bits and Atoms (CBA), has been pursuing as his doctoral thesis work. It's now reached the point that prototype versions of such robots can assemble small structures and even work together as a team to build up a larger assemblies. The new work appears in the October issue of the IEEE Robotics and Automation Letters, in a paper by Jenett, Gershenfeld, fellow graduate student Amira Abdel-Rahman, and CBA alumnus Kenneth Cheung SM '07, PhD '12, who is now at NASA's Ames Research Center, where he leads the ARMADAS project to design a lunar base that could be built with robotic assembly. "What's at the heart of this is a new kind of robotics, that we call relative robots," Gershenfeld says.

Today's commercial aircraft are typically manufactured in sections, often in different locations -- wings at one factory, fuselage sections at another, tail components somewhere else -- and then flown to a central plant in huge cargo planes for final assembly. But what if the final assembly was the only assembly, with the whole plane built out of a large array of tiny identical pieces, all put together by an army of tiny robots? That's the vision that graduate student Benjamin Jenett, working with Professor Neil Gershenfeld in MIT's Center for Bits and Atoms (CBA), has been pursuing as his doctoral thesis work. It's now reached the point that prototype versions of such robots can assemble small structures and even work together as a team to build up a larger assemblies. The new work appears in the October issue of the IEEE Robotics and Automation Letters, in a paper by Jenett, Gershenfeld, fellow graduate student Amira Abdel-Rahman, and CBA alumnus Kenneth Cheung SM '07, PhD '12, who is now at NASA's Ames Research Center, where he leads the ARMADAS project to design a lunar base that could be built with robotic assembly.