When you purchase through links in our articles, we may earn a small commission. BotsLab 4-Cam W510 System review: This security package doesn't deliver Four 4K cameras, a base station with expandable local storage, and no subscription required, So, what's the catch? This four-camera system impresses with solid video quality and expandable local storage, but only when those cameras are in such close range that they probably won't provide full coverage of your property. Outfitting your home with outdoor security cameras can get complicated--and expensive--quickly. Anyone looking for a shortcut on both fronts might consider one of BotsLab's W510 kits, bundles consisting of up to six 4K outdoor pan/tilt security cameras, solar panels to keep each camera's battery topped off, and a base station with 32GB of onboard storage (expandable up to 16TB with a user-supplied 2.5 hard drive).

This work presents a conceptual study on the application of Multi-Agent Reinforcement Learning (MARL) for decentralized control of unmanned aerial vehicles to relay a critical data package to a known position. For this purpose, a family of deterministic games is introduced, designed for scaling studies for MARL. A robust baseline policy is proposed, which is based on restricting agent motion envelopes and applying Dijkstra's algorithm. Experimental results show that two off-the-shelf MARL algorithms perform competitively with the baseline for a small number of agents, but scalability issues arise as the number of agents increase.

Reconfigurable intelligent surface (RIS) and simultaneously transmitting and reflecting RIS (STAR-RIS) have emerged as key enablers for enhancing wireless coverage and capacity in next-generation networks. When mounted on unmanned aerial vehicles (UAVs), they benefit from flexible deployment and improved line-of-sight conditions. Despite their promising potential, a comprehensive performance comparison between aerial RIS and STAR-RIS architectures has not been thoroughly investigated. This letter presents a detailed performance comparison between aerial RIS and STAR-RIS in three-dimensional wireless environments. Accurate channel models incorporating directional radiation patterns are established, and the influence of deployment altitude and orientation is thoroughly examined. To optimize the system sum-rate, we formulate joint optimization problems for both architectures and propose an efficient solution based on the weighted minimum mean square error and block coordinate descent algorithms. Simulation results reveal that STAR-RIS outperforms RIS in low-altitude scenarios due to its full-space coverage capability, whereas RIS delivers better performance near the base station at higher altitudes. The findings provide practical insights for the deployment of aerial intelligent surfaces in future 6G communication systems.

Radio frequency (RF)-based indoor localization offers significant promise for applications such as indoor navigation, augmented reality, and pervasive computing. While deep learning has greatly enhanced localization accuracy and robustness, existing localization models still face major challenges in cross-scene generalization due to their reliance on scene-specific labeled data. To address this, we introduce Radiance-Field Reinforced Pretraining (RFRP). This novel self-supervised pretraining framework couples a large localization model (LM) with a neural radio-frequency radiance field (RF-NeRF) in an asymmetrical autoencoder architecture. In this design, the LM encodes received RF spectra into latent, position-relevant representations, while the RF-NeRF decodes them to reconstruct the original spectra. This alignment between input and output enables effective representation learning using large-scale, unlabeled RF data, which can be collected continuously with minimal effort. To this end, we collected RF samples at 7,327,321 positions across 100 diverse scenes using four common wireless technologies--RFID, BLE, WiFi, and IIoT. Data from 75 scenes were used for training, and the remaining 25 for evaluation. Experimental results show that the RFRP-pretrained LM reduces localization error by over 40% compared to non-pretrained models and by 21% compared to those pretrained using supervised learning.

Real-time water-level monitoring across many locations is vital for flood response, infrastructure management, and environmental forecasting. Yet many sensing methods rely on fixed instruments - acoustic, radar, camera, or pressure probes - that are costly to install and maintain and are vulnerable during extreme events. We propose a passive, low-cost water-level tracking scheme that uses only LTE downlink power metrics reported by commodity receivers. The method extracts per-antenna RSRP, RSSI, and RSRQ, applies a continuous wavelet transform (CWT) to the RSRP to isolate the semidiurnal tide component, and forms a summed-coefficient signature that simultaneously marks high/low tide (tide-turn times) and tracks the tide-rate (flow speed) over time. These wavelet features guide a lightweight neural network that learns water-level changes over time from a short training segment. Beyond a single serving base station, we also show a multi-base-station cooperative mode: independent CWTs are computed per carrier and fused by a robust median to produce one tide-band feature that improves stability and resilience to local disturbances. Experiments over a 420 m river path under line-of-sight conditions achieve root-mean-square and mean-absolute errors of 0.8 cm and 0.5 cm, respectively. Under a non-line-of-sight setting with vegetation and vessel traffic, the same model transfers successfully after brief fine-tuning, reaching 1.7 cm RMSE and 0.8 cm MAE. Unlike CSI-based methods, the approach needs no array calibration and runs on standard hardware, making wide deployment practical. When signals from multiple base stations are available, fusion further improves robustness.

Drone fleets equipped with onboard cameras, computer vision, and Deep Neural Network (DNN) models present a powerful paradigm for real-time spatio-temporal decision-making. In wildfire response, such drones play a pivotal role in monitoring fire dynamics, supporting firefighter coordination, and facilitating safe evacuation. In this paper, we introduce AeroResQ, an edge-accelerated UAV framework designed for scalable, resilient, and collaborative escape route planning during wildfire scenarios. AeroResQ adopts a multi-layer orchestration architecture comprising service drones (SDs) and coordinator drones (CDs), each performing specialized roles. SDs survey fire-affected areas, detect stranded individuals using onboard edge accelerators running fire detection and human pose identification DNN models, and issue requests for assistance. CDs, equipped with lightweight data stores such as Apache IoTDB, dynamically generate optimal ground escape routes and monitor firefighter movements along these routes. The framework proposes a collaborative path-planning approach based on a weighted A* search algorithm, where CDs compute context-aware escape paths. AeroResQ further incorporates intelligent load-balancing and resilience mechanisms: CD failures trigger automated data redistribution across IoTDB replicas, while SD failures initiate geo-fenced re-partitioning and reassignment of spatial workloads to operational SDs. We evaluate AeroResQ using realistic wildfire emulated setup modeled on recent Southern California wildfires. Experimental results demonstrate that AeroResQ achieves a nominal end-to-end latency of <=500ms, much below the 2s request interval, while maintaining over 98% successful task reassignment and completion, underscoring its feasibility for real-time, on-field deployment in emergency response and firefighter safety operations.

Abstract--As spectrum sharing becomes increasingly vital to meet rising wireless demands in the future, spectrum monitoring and transmitter identification are indispensable for enforcing spectrum usage policy, efficient spectrum utilization, and network security. This study proposed a robust framework for transmitter identification and protocol categorization via multi-task RF signal classification in shared spectrum environments, where the spectrum monitor will classify transmission protocols (e.g., 4G L TE, 5G-NR, IEEE 802.11a) operating within the same frequency bands, and identify different transmitting base stations, as well as their combinations. A Convolutional Neural Network (CNN) is designed to tackle critical challenges such as overlapping signal characteristics and environmental variability. The proposed method employs a multi-channel input strategy to extract meaningful signal features, achieving remarkable accuracy: 90% for protocol classification, 100% for transmitting base station classification, and 92% for joint classification tasks, utilizing RF data from the POWDER platform. These results highlight the significant potential of the proposed method to enhance spectrum monitoring, management, and security in modern wireless networks.

Nvidia, the artificial intelligence (AI) chip leader, will build seven new supercomputers for the United States Department of Energy (DOE), CEO Jensen Huang has said. The company has $500bn in bookings for its AI chips, Huang said on Tuesday in a keynote address at the company's GTC event in Washington, DC, the US capital. It is striking deals around the world while also navigating a US-China trade war that could determine which country's technology is most used across the globe. Investors are looking for clarity on what chips the tech company will be able to sell to the vast Chinese market, but Huang in his keynote speech praised policies by US President Donald Trump while announcing new products and deals. These included network technology that will let Nvidia AI chips work with quantum computers.

Small Unmanned Aerial Vehicles (UAVs) exhibit immense potential for navigating indoor and hard-to-reach areas, yet their significant constraints in payload and autonomy have largely prevented their use for complex tasks like high-quality 3-Dimensional (3D) reconstruction. To overcome this challenge, we introduce a novel system architecture that enables fully autonomous, high-fidelity 3D scanning of static objects using UAVs weighing under 100 grams. Our core innovation lies in a dual-reconstruction pipeline that creates a real-time feedback loop between data capture and flight control. A near-real-time (near-RT) process uses Structure from Motion (SfM) to generate an instantaneous pointcloud of the object. The system analyzes the model quality on the fly and dynamically adapts the UAV's trajectory to intelligently capture new images of poorly covered areas. This ensures comprehensive data acquisition. For the final, detailed output, a non-real-time (non-RT) pipeline employs a Neural Radiance Fields (NeRF)-based Neural 3D Reconstruction (N3DR) approach, fusing SfM-derived camera poses with precise Ultra Wide-Band (UWB) location data to achieve superior accuracy. We implemented and validated this architecture using Crazyflie 2.1 UAVs. Our experiments, conducted in both single- and multi-UAV configurations, conclusively show that dynamic trajectory adaptation consistently improves reconstruction quality over static flight paths. This work demonstrates a scalable and autonomous solution that unlocks the potential of miniaturized UAVs for fine-grained 3D reconstruction in constrained environments, a capability previously limited to much larger platforms.

In WSN/IoT, node localization is essential to long-running applications for accurate environment monitoring and event detection, often covering a large area in the field. Due to the lower time resolution of typical WSN/IoT platforms (e.g., 1 microsecond on ESP32 platforms) and the jitters in timestamping, packet-level localization techniques cannot provide meter-level resolution. For high-precision localization as well as world-wide interoperability via 2.4-GHz ISM band, a new variant of LoRa, called LoRa 2.4 GHz, was proposed by semtech, which provides a radio frequency (RF) time of flight (ToF) ranging method for meter-level localization. However, the existing datasets reported in the literature are limited in their coverages and do not take into account varying environmental factors such as temperature and humidity. To address these issues, LoRa 2.4 GHz RF ToF ranging data was collected on a sports field at the XJTLU south campus, where three LoRa nodes logged samples of ranging with a LoRa base station, together with temperature and humidity, at reference points arranged as a 3x3 grid covering 400 square meter over three weeks and uploaded all measurement records to the base station equipped with an ESP32-based transceiver for machine and user communications. The results of a preliminary investigation based on a simple deep neural network (DNN) model demonstrate that the environmental factors, including the temperature and humidity, significantly affect the accuracy of ranging, which calls for advanced methods of compensating for the effects of environmental factors on LoRa RF ToF ranging outdoors.