The deployment of autonomous navigation systems on ships necessitates accurate motion prediction models tailored to individual vessels. Traditional physics-based models, while grounded in hydrodynamic principles, often fail to account for ship-specific behaviors under real-world conditions. Conversely, purely data-driven models offer specificity but lack interpretability and robustness in edge cases. This study proposes a data-driven physics-based model that integrates physics-based equations with data-driven parameter optimization, leveraging the strengths of both approaches to ensure interpretability and adaptability. The model incorporates physics-based components such as 3-DoF dynamics, rudder, and propeller forces, while parameters such as resistance curve and rudder coefficients are optimized using synthetic data. By embedding domain knowledge into the parameter optimization process, the fitted model maintains physical consistency. Validation of the approach is realized with two container ships by comparing, both qualitatively and quantitatively, predictions against ground-truth trajectories. The results demonstrate significant improvements, in predictive accuracy and reliability, of the data-driven physics-based models over baseline physics-based models tuned with traditional marine engineering practices. The fitted models capture ship-specific behaviors in diverse conditions with their predictions being, 51.6% (ship A) and 57.8% (ship B) more accurate, 72.36% (ship A) and 89.67% (ship B) more consistent.

PAPER ID: TMRB-06-24-OA-0958 1 Model-based optimisation for the personalisation of robot-assisted gait training Andreas Christou, Daniel F. N. Gordon, Theodoros Stouraitis, Juan C. Moreno and Sethu Vijayakumar Abstract--Personalised rehabilitation can be key to promoting gait independence and quality of life. Robots can enhance therapy by systematically delivering support in gait training, but often use one-size-fits-all control methods, which can be suboptimal. Here, we describe a model-based optimisation method for designing and fine-tuning personalised robotic controllers. As a case study, we formulate the objective of providing assistance as needed as an optimisation problem, and we demonstrate how musculoskeletal modelling can be used to develop personalised interventions. Eighteen healthy participants (age = 26 4) were recruited and the personalised control parameters for each were obtained to provide assistance as needed during a unilateral tracking task. A comparison was carried out between the personalised controller and the non-personalised controller. In simulation, a significant improvement was predicted when the personalised parameters were used. Experimentally, responses varied: six subjects showed significant improvements with the personalised parameters, eight subjects showed no obvious change, while four subjects performed worse. High interpersonal and intra-personal variability was observed with both controllers. This study highlights the importance of personalised control in robot-assisted gait training, and the need for a better estimation of human-robot interaction and human behaviour to realise the benefits of model-based optimisation. I. Introduction Motor function deficits are often the result of neurological disorders and can significantly impact the quality of This research was supported in part by the Engineering and Physical Sciences Research Council (EPSRC, grant reference EP/L016834/1) as part of the Centre for Doctoral Training in Robotics and Autonomous Systems at Heriot-Watt University and The University of Edinburgh, in part by the Alan Turing Institute, U.K., in part by Project I+D+i RED2022-134319-T (Spain), and in part by the Japan Science and Technology Agency (JST) Moonshot R&D Program (Grant No. JPMJMS2239). This includes one multimedia MP4 format movie clip, which provides scenes of the experimental setup. This material is 24.1 MB in size. T. Stouraitis is with DeepSea Technologies, 105 64 Athens, Greece (email: stoutheo@gmail.com).

This paper investigates one of the most challenging tasks in dynamic manipulation -- catching large-momentum moving objects. Beyond the realm of quasi-static manipulation, dealing with highly dynamic objects can significantly improve the robot's capability of interacting with its surrounding environment. Yet, the inevitable motion mismatch between the fast moving object and the approaching robot will result in large impulsive forces, which lead to the unstable contacts and irreversible damage to both the object and the robot. To address the above problems, we propose an online optimization framework to: 1) estimate and predict the linear and angular motion of the object; 2) search and select the optimal contact locations across every surface of the object to mitigate impact through sequential quadratic programming (SQP); 3) simultaneously optimize the end-effector motion, stiffness, and contact force for both robots using multi-mode trajectory optimization (MMTO); and 4) realise the impact-aware catching motion on the compliant robotic system based on indirect force controller. We validate the impulse distribution, contact selection, and impact-aware MMTO algorithms in simulation and demonstrate the benefits of the proposed framework in real-world experiments including catching large-momentum moving objects with well-defined motion, constrained motion and free-flying motion.

This paper presents a novel concept to support physically impaired humans in daily object manipulation tasks with a robot. Given a user's manipulation sequence, we propose a predictive model that uniquely casts the user's sequential behavior as well as a robot support intervention into a hierarchical multi-objective optimization problem. A major contribution is the prediction formulation, which allows to consider several different future paths concurrently. The second contribution is the encoding of a general notion of constancy constraints, which allows to consider dependencies between consecutive or far apart keyframes (in time or space) of a sequential task. We perform numerical studies, simulations and robot experiments to analyse and evaluate the proposed method in several table top tasks where a robot supports impaired users by predicting their posture and proactively re-arranging objects.

This paper explores the challenges faced by assistive robots in effectively cooperating with humans, requiring them to anticipate human behavior, predict their actions' impact, and generate understandable robot actions. The study focuses on a use-case involving a user with limited mobility needing assistance with pouring a beverage, where tasks like unscrewing a cap or reaching for objects demand coordinated support from the robot. Yet, anticipating the robot's intentions can be challenging for the user, which can hinder effective collaboration. To address this issue, we propose an innovative solution that utilizes Augmented Reality (AR) to communicate the robot's intentions and expected movements to the user, fostering a seamless and intuitive interaction.

A key challenge in human-robot collaboration is the non-stationarity created by humans due to changes in their behaviour. This alters environmental transitions and hinders human-robot collaboration. We propose a principled meta-learning framework to explore how robots could better predict human behaviour, and thereby deal with issues of non-stationarity. On the basis of this framework, we developed Behaviour-Transform (BeTrans). BeTrans is a conditional transformer that enables a robot agent to adapt quickly to new human agents with non-stationary behaviours, due to its notable performance with sequential data. We trained BeTrans on simulated human agents with different systematic biases in collaborative settings. We used an original customisable environment to show that BeTrans effectively collaborates with simulated human agents and adapts faster to non-stationary simulated human agents than SOTA techniques.

Reliable contact simulation plays a key role in the development of (semi-)autonomous robots, especially when dealing with contact-rich manipulation scenarios, an active robotics research topic. Besides simulation, components such as sensing, perception, data collection, robot hardware control, human interfaces, etc. are all key enablers towards applying machine learning algorithms or model-based approaches in real world systems. However, there is a lack of software connecting reliable contact simulation with the larger robotics ecosystem (i.e. ROS, Orocos), for a more seamless application of novel approaches, found in the literature, to existing robotic hardware. In this paper, we present the ROS-PyBullet Interface, a framework that provides a bridge between the reliable contact/impact simulator PyBullet and the Robot Operating System (ROS). Furthermore, we provide additional utilities for facilitating Human-Robot Interaction (HRI) in the simulated environment. We also present several use-cases that highlight the capabilities and usefulness of our framework. Please check our video, source code, and examples included in the supplementary material. Our full code base is open source and can be found at https://github.com/cmower/ros_pybullet_interface.