This article presents Appformer, a novel mobile application prediction framework inspired by the efficiency of Transformer-like architectures in processing sequential data through self-attention mechanisms. Combining a Multi-Modal Data Progressive Fusion Module with a sophisticated Feature Extraction Module, Appformer leverages the synergies of multi-modal data fusion and data mining techniques while maintaining user privacy. The framework employs Points of Interest (POIs) associated with base stations, optimizing them through comprehensive comparative experiments to identify the most effective clustering method. These refined inputs are seamlessly integrated into the initial phases of cross-modal data fusion, where temporal units are encoded via word embeddings and subsequently merged in later stages. The Feature Extraction Module, employing Transformer-like architectures specialized for time series analysis, adeptly distils comprehensive features. It meticulously fine-tunes the outputs from the fusion module, facilitating the extraction of high-calibre, multi-modal features, thus guaranteeing a robust and efficient extraction process. Extensive experimental validation confirms Appformer's effectiveness, attaining state-of-the-art (SOTA) metrics in mobile app usage prediction, thereby signifying a notable progression in this field.

Deep learning (DL)-based channel state information (CSI) feedback has the potential to improve the recovery accuracy and reduce the feedback overhead in massive multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. However, the length of input CSI and the number of feedback bits should be adjustable in different scenarios, which can not be efficiently achieved by the existing CSI feedback models. Therefore, an adaptive bidirectional long short-term memory network (ABLNet) for CSI feedback is first designed to process various input CSI lengths, where the number of feedback bits is in proportion to the CSI length. Then, to realize a more flexible feedback bit number, a feedback bit control unit (FBCU) module is proposed to control the output length of feedback bits. Based on which, a target feedback performance can be adaptively achieved by a designed bit number adjusting (BNA) algorithm. Furthermore, a novel separate training approach is devised to solve the model protection problem that the UE and gNB are from different manufacturers. Experiments demonstrate that the proposed ABLNet with FBCU can fit for different input CSI lengths and feedback bit numbers; the CSI feedback performance can be stabilized by the BNA algorithm; and the proposed separate training approach can maintain the feedback performance and reduce the complexity of feedback model.

Resilience is defined as the ability of a network to resist, adapt, and quickly recover from disruptions, and to continue to maintain an acceptable level of services from users' perspective. With the advent of future radio networks, including advanced 5G and upcoming 6G, critical services become integral to future networks, requiring uninterrupted service delivery for end users. Unfortunately, with the growing network complexity, user mobility and diversity, it becomes challenging to scale current resilience management techniques that rely on local optimizations to large dense network deployments. This paper aims to address this problem by globally optimizing the resilience of a dense multi-cell network based on multi-agent deep reinforcement learning. Specifically, our proposed solution can dynamically tilt cell antennas and reconfigure transmit power to mitigate outages and increase both coverage and service availability. A multi-objective optimization problem is formulated to simultaneously satisfy resiliency constraints while maximizing the service quality in the network area in order to minimize the impact of outages on neighbouring cells. Extensive simulations then demonstrate that with our proposed solution, the average service availability in terms of user throughput can be increased by up to 50-60% on average, while reaching a coverage availability of 99% in best cases.

The growing complexity of networks and the variety of future scenarios with diverse and often stringent performance requirements call for a higher level of automation. Intent-based management emerges as a solution to attain high level of automation, enabling human operators to solely communicate with the network through high-level intents. The intents consist of the targets in the form of expectations (i.e., latency expectation) from a service and based on the expectations the required network configurations should be done accordingly. It is almost inevitable that when a network action is taken to fulfill one intent, it can cause negative impacts on the performance of another intent, which results in a conflict. In this paper, we aim to address the conflict issue and autonomous management of intent-based networking, and propose an online learning method based on the hierarchical multi-armed bandits approach for an effective management. Thanks to this hierarchical structure, it performs an efficient exploration and exploitation of network configurations with respect to the dynamic network conditions. We show that our algorithm is an effective approach regarding resource allocation and satisfaction of intent expectations.

We propose an optimization algorithm to improve the design and performance of quantum communication networks. When physical architectures become too complex for analytical methods, numerical simulation becomes essential to study quantum network behavior. Although highly informative, these simulations involve complex numerical functions without known analytical forms, making traditional optimization techniques that assume continuity, differentiability, or convexity inapplicable. Additionally, quantum network simulations are computationally demanding, rendering global approaches like Simulated Annealing or genetic algorithms, which require extensive function evaluations, impractical. We introduce a more efficient optimization workflow using machine learning models, which serve as surrogates for a given objective function. We demonstrate the effectiveness of our approach by applying it to three well-known optimization problems in quantum networking: quantum memory allocation for multiple network nodes, tuning an experimental parameter in all physical links of a quantum entanglement switch, and finding efficient protocol settings within a large asymmetric quantum network. The solutions found by our algorithm consistently outperform those obtained with our baseline approaches -- Simulated Annealing and Bayesian optimization -- in the allotted time limit by up to 18\% and 20\%, respectively. Our framework thus allows for more comprehensive quantum network studies, integrating surrogate-assisted optimization with existing quantum network simulators.

Deep learning-based fingerprinting is one of the current promising technologies for outdoor localization in cellular networks. However, deploying such localization systems for heterogeneous phones affects their accuracy as the cellular received signal strength (RSS) readings vary for different types of phones. In this paper, we introduce a number of techniques for addressing the phones heterogeneity problem in the deep-learning based localization systems. The basic idea is either to approximate a function that maps the cellular RSS measurements between different devices or to transfer the knowledge across them. Evaluation of the proposed techniques using different Android phones on four independent testbeds shows that our techniques can improve the localization accuracy by more than 220% for the four testbeds as compared to the state-of-the-art systems. This highlights the promise of the proposed device heterogeneity handling techniques for enabling a wide deployment of deep learning-based localization systems over different devices.

Unmanned Aerial Vehicles (UAVs) provide agile and safe solutions to communication relay networks, offering improved throughput. However, their modeling and control present challenges, and real-world deployment is hindered by the gap between simulation and reality. Moreover, enhancing situational awareness is critical. Several works in the literature proposed integrating UAV operation with immersive digital technologies, such as Digital Twin (DT) and Extended Reality (XR), to address these challenges. This paper provides a comprehensive overview of current research and developments involving immersive digital technologies for UAVs, including the latest advancements and emerging trends. We also explore the integration of DT and XR with Artificial Intelligence (AI) algorithms to create more intelligent, adaptive, and responsive UAV systems. Finally, we provide discussions, identify gaps in current research, and suggest future directions for studying the application of immersive technologies in UAVs, fostering further innovation and development in this field. We envision the fusion of DTs with XR will transform how UAVs operate, offering tools that enhance visualization, improve decision-making, and enable effective collaboration.

Efficient Random Access (RA) is critical for enabling reliable communication in Industrial Internet of Things (IIoT) networks. Herein, we propose a deep reinforcement learning based distributed RA scheme, entitled Neural Network-Based Bandit (NNBB), for the IIoT alarm scenario. In such a scenario, the devices may detect a common critical event, and the goal is to ensure the alarm information is delivered successfully from at least one device. The proposed NNBB scheme is implemented at each device, where it trains itself online and establishes implicit inter-device coordination to achieve the common goal. Devices can transmit simultaneously on multiple orthogonal channels and each possible transmission pattern constitutes a possible action for the NNBB, which uses a deep neural network to determine the action. Our simulation results show that as the number of devices in the network increases, so does the performance gain of the NNBB compared to the Multi-Armed Bandit (MAB) RA benchmark. For instance, NNBB experiences a 7% success rate drop when there are four channels and the number of devices increases from 10 to 60, while MAB faces a 25% drop.

Although outdoor localization is already available to the general public and businesses through the wide spread use of the GPS, it is not supported by low-end phones, requires a direct line of sight to satellites and can drain phone battery quickly. The current fingerprinting solutions can provide high-accuracy localization but are based on the client side. This limits their ubiquitous deployment and accuracy. In this paper, we introduce DeepCell: a provider-side fingerprinting localization system that can provide high accuracy localization for any cell phone. To build its fingerprint, DeepCell leverages the unlabeled cellular measurements recorded by the cellular provider while opportunistically synchronizing with selected client devices to get location labels. The fingerprint is then used to train a deep neural network model that is harnessed for localization. To achieve this goal, DeepCell need to address a number of challenges including using unlabeled data from the provider side, handling noise and sparsity, scaling the data to large areas, and finally providing enough data that is required for training deep models without overhead. Evaluation of DeepCell in a typical realistic environment shows that it can achieve a consistent median accuracy of 29m. This accuracy outperforms the state-of-the-art client-based cellular-based systems by more than 75.4%. In addition, the same accuracy is extended to low-end phones.

One effective way to optimize the offloading process is by minimizing the transmission time. This is particularly true in a Vehicular Adhoc Network (VANET) where vehicles frequently download and upload High-definition (HD) map data which requires constant updates. This implies that latency and throughput requirements must be guaranteed by the wireless system. To achieve this, adjustable contention windows (CW) allocation strategies in the standard IEEE802.11p have been explored by numerous researchers. Nevertheless, their implementations demand alterations to the existing standard which is not always desirable. To address this issue, we proposed a Q-Learning algorithm that operates at the application layer. Moreover, it could be deployed in any wireless network thereby mitigating the compatibility issues. The solution has demonstrated a better network performance with relatively fewer optimization requirements as compared to the Deep Q Network (DQN) and Actor-Critic algorithms. The same is observed while evaluating the model in a multi-agent setup showing higher performance compared to the single-agent setup.