This paper proposes a comprehensive strategy for complex multi-target-multi-drone encirclement in an obstacle-rich and GPS-denied environment, motivated by practical scenarios such as pursuing vehicles or humans in urban canyons. The drones have omnidirectional range sensors that can robustly detect ground targets and obtain noisy relative distances. After each drone task is assigned, a novel distance-based target state estimator (DTSE) is proposed by estimating the measurement output noise variance and utilizing the Kalman filter. By integrating anti-synchronization techniques and pseudo-force functions, an acceleration controller enables two tasking drones to cooperatively encircle a target from opposing positions while navigating obstacles. The algorithms effectiveness for the discrete-time double-integrator system is established theoretically, particularly regarding observability. Moreover, the versatility of the algorithm is showcased in aerial-to-ground scenarios, supported by compelling simulation results. Experimental validation demonstrates the effectiveness of the proposed approach.

With its early roots in the development of calculus by Isaac Newton, Gottfried Wilhelm Leibniz, Pierre de Ferma t and others in the late 17th century, mathematical optimization has a rich his tory that involves contributions from numerous mathematicians, economists, eng ineers, and scientists. The birth of modern mathematical optimization is commonly c redited to George Dantzig, whose simplex algorithm developed in 1947 solves l inear optimization problems where ℓ is affine and X is a polyhedron ( Dantzig 1956). Subsequent milestones include the development of the rich theory of convex a nalysis ( Rockafellar 1970) as well as the discovery of polynomial-time solution metho ds for linear ( Khachiyan 1979, Karmarkar 1984) and broad classes of nonlinear convex optimization problems ( Nesterov and Nemirovskii 1994). Classical optimization problems are deterministic, that is, all problem data are assumed to be known with certainty. However, most decision pro blems encountered in practice depend on parameters that are corrupted by measu rement errors or that are revealed only after a decision must be determined and committed. A naïve approach to model uncertainty-affected decision problems a s deterministic optimization problems would be to replace all uncertain paramete rs with their expected values or with appropriate point predictions. However, it h as long been known and well-documented that decision-makers who replace an un certain parameter of an optimization problem with its mean value fall victim to th e'flaw of averages' ( Savage, Scholtes and Zweidler 2006, Savage 2012).

In this study, the novel hybrid machine learning approach is proposed in carbon price fluctuation prediction. Specifically, a research framework integrating DILATED Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) neural network algorithm is proposed. The advantage of the combined framework is that it can make feature extraction more efficient. Then, based on the DILATED CNN-LSTM framework, the L1 and L2 parameter norm penalty as regularization method is adopted to predict. Referring to the characteristics of high correlation between energy indicator price and blockchain information in previous literature, and we primarily includes indicators related to blockchain information through regularization process. Based on the above methods, this paper uses a dataset containing an amount of data to carry out the carbon price prediction. The experimental results show that the DILATED CNN-LSTM framework is superior to the traditional CNN-LSTM architecture. Blockchain information can effectively predict the price. Since parameter norm penalty as regularization, Ridge Regression (RR) as L2 regularization is better than Smoothly Clipped Absolute Deviation Penalty (SCAD) as L1 regularization in price forecasting. Thus, the proposed RR-DILATED CNN-LSTM approach can effectively and accurately predict the fluctuation trend of the carbon price. Therefore, the new forecasting methods and theoretical ecology proposed in this study provide a new basis for trend prediction and evaluating digital assets policy represented by the carbon price for both the academia and practitioners.

We propose a distributed control law for a heterogeneous multi-robot coverage problem, where the robots could have different energy characteristics, such as capacity and depletion rates, due to their varying sizes, speeds, capabilities, and payloads. Existing energy-aware coverage control laws consider capacity differences but assume the battery depletion rate to be the same for all robots. In realistic scenarios, however, some robots can consume energy much faster than other robots; for instance, UAVs hover at different altitudes, and these changes could be dynamically updated based on their assigned tasks. Robots' energy capacities and depletion rates need to be considered to maximize the performance of a multi-robot system. To this end, we propose a new energy-aware controller based on Lloyd's algorithm to adapt the weights of the robots based on their energy dynamics and divide the area of interest among the robots accordingly. The controller is theoretically analyzed and extensively evaluated through simulations and real-world demonstrations in multiple realistic scenarios and compared with three baseline control laws to validate its performance and efficacy.

Integrated micro power generators are crucial components for micro robotic platforms to demonstrate untethered operation and to achieve autonomy. Current micro robotic electrostatic actuators typically require hundreds to thousands of voltages to output sufficient work. Pyroelectricity is one such source of high voltages that can be scaled to small form factors. This paper demonstrates a distributed pyroelectric high voltage generation mechanism to power kV actuators using alternating exposure of crystals to hot and cold water (300C to 900C water temperature). Using this fluidic temperature control, a pyroelectrically generated voltage of 2470 V was delivered to a 2 pF storage capacitor yielding a 6.10 {\mu}J stored energy. A maximum energy of 17.46 {\mu}J was delivered to a 47 pF capacitor at 861 V. The recirculating water can be used to heat a distributed array of converters to generate electricity in distant robotic actuator sections. The development of this distributed system would enable untethered micro-robot to be operated with a flexible body and free of battery recharging, which advances its applications in the real world.

This paper presents a communication and energy-aware Multi-UAV Coverage Path Planning (mCPP) method for scenarios requiring continuous inter-UAV communication, such as cooperative search and rescue and surveillance missions. Unlike existing mCPP solutions that focus on energy, time, or coverage efficiency, our approach generates coverage paths that require minimal the communication range to maintain inter-UAV connectivity while also optimizing energy consumption. The mCPP problem is formulated as a multi-objective optimization task, aiming to minimize both the communication range requirement and energy consumption. Our approach significantly reduces the communication range needed for maintaining connectivity while ensuring energy efficiency, outperforming state-of-the-art methods. Its effectiveness is validated through simulations on complex and arbitrary shaped regions of interests, including scenarios with no-fly zones. Additionally, real-world experiment demonstrate its high accuracy, achieving 99\% consistency between the estimated and actual communication range required during a multi-UAV coverage mission involving three UAVs.

While numerous studies have explored the field of research and development (R&D) landscaping, the preponderance of these investigations has emphasized predictive analysis based on R&D outcomes, specifically patents, and academic literature. However, the value of research proposals and novelty analysis has seldom been addressed. This study proposes a systematic approach to constructing and navigating the R&D landscape that can be utilized to guide organizations to respond in a reproducible and timely manner to the challenges presented by increasing number of research proposals. At the heart of the proposed approach is the composite use of the transformer-based language model and the local outlier factor (LOF). The semantic meaning of the research proposals is captured with our further-trained transformers, thereby constructing a comprehensive R&D landscape. Subsequently, the novelty of the newly selected research proposals within the annual landscape is quantified on a numerical scale utilizing the LOF by assessing the dissimilarity of each proposal to others preceding and within the same year. A case study examining research proposals in the energy and resource sector in South Korea is presented. The systematic process and quantitative outcomes are expected to be useful decision-support tools, providing future insights regarding R&D planning and roadmapping.

We present an innovative robotic device designed to provide controlled motion for studying active matter. Motion is driven by an internal vibrator powered by a small rechargeable battery. The system integrates acoustic and magnetic sensors along with a programmable microcontroller. Unlike conventional vibrobots, the motor induces horizontal vibrations, resulting in cycloidal trajectories that have been characterized and optimized. Portions of these orbits can be utilized to create specific motion patterns. As a proof of concept, we demonstrate how this versatile system can be exploited to develop active particles with varying dynamics, ranging from ballistic motion to run-and-tumble diffusive behavior.

The efficacy of mathematical models heavily depends on the quality of the training data, yet collecting sufficient data is often expensive and challenging. Many modeling applications require inferring parameters only as a means to predict other quantities of interest (QoI). Because models often contain many unidentifiable (sloppy) parameters, QoIs often depend on a relatively small number of parameter combinations. Therefore, we introduce an information-matching criterion based on the Fisher Information Matrix to select the most informative training data from a candidate pool. This method ensures that the selected data contain sufficient information to learn only those parameters that are needed to constrain downstream QoIs. It is formulated as a convex optimization problem, making it scalable to large models and datasets. We demonstrate the effectiveness of this approach across various modeling problems in diverse scientific fields, including power systems and underwater acoustics. Finally, we use information-matching as a query function within an Active Learning loop for material science applications. In all these applications, we find that a relatively small set of optimal training data can provide the necessary information for achieving precise predictions. These results are encouraging for diverse future applications, particularly active learning in large machine learning models.

Machine learning enables unbinned, highly-differential cross section measurements. A recent idea uses generative models to morph a starting simulation into the unfolded data. We show how to extend two morphing techniques, Schr\"odinger Bridges and Direct Diffusion, in order to ensure that the models learn the correct conditional probabilities. This brings distribution mapping to a similar level of accuracy as the state-of-the-art conditional generative unfolding methods. Numerical results are presented with a standard benchmark dataset of single jet substructure as well as for a new dataset describing a 22-dimensional phase space of Z + 2-jets.