Recent advances in quadrupedal locomotion have focused on improving stability and performance across diverse environments. However, existing methods often lack adequate safety analysis and struggle to adapt to varying payloads and complex terrains, typically requiring extensive tuning. To overcome these challenges, we propose a Chance-Constrained Model Predictive Control (CCMPC) framework that explicitly models payload and terrain variability as distributions of parametric and additive disturbances within the single rigid body dynamics (SRBD) model. Our approach ensures safe and consistent performance under uncertain dynamics by expressing the model friction cone constraints, which define the feasible set of ground reaction forces, as chance constraints. Moreover, we solve the resulting stochastic control problem using a computationally efficient quadratic programming formulation. Extensive Monte Carlo simulations of quadrupedal locomotion across varying payloads and complex terrains demonstrate that CCMPC significantly outperforms two competitive benchmarks: Linear MPC (LMPC) and MPC with hand-tuned safety margins to maintain stability, reduce foot slippage, and track the center of mass. Hardware experiments on the Unitree Go1 robot show successful locomotion across various indoor and outdoor terrains with unknown loads exceeding 50% of the robot body weight, despite no additional parameter tuning. A video of the results and accompanying code can be found at: https://cc-mpc.github.io/.

In the context of visual navigation in unknown scenes, both "exploration" and "exploitation" are equally crucial. Robots must first establish environmental cognition through exploration and then utilize the cognitive information to accomplish target searches. However, most existing methods for image-goal navigation prioritize target search over the generation of exploratory behavior. To address this, we propose the Navigation with Uncertainty-driven Exploration (NUE) pipeline, which uses an implicit and compact scene representation, NeRF, as a cognitive structure. We estimate the uncertainty of NeRF and augment the exploratory ability by the uncertainty to in turn facilitate the construction of implicit representation. Simultaneously, we extract memory information from NeRF to enhance the robot's reasoning ability for determining the location of the target. Ultimately, we seamlessly combine the two generated abilities to produce navigational actions. Our pipeline is end-to-end, with the environmental cognitive structure being constructed online. Extensive experimental results on image-goal navigation demonstrate the capability of our pipeline to enhance exploratory behaviors, while also enabling a natural transition from the exploration to exploitation phase. This enables our model to outperform existing memory-based cognitive navigation structures in terms of navigation performance.

Electromagnetic field simulation is central to designing, optimizing, and validating photonic devices and circuits. However, costly computation associated with numerical simulation poses a significant bottleneck, hindering scalability and turnaround time in the photonic circuit design process. Neural operators offer a promising alternative, but existing SOTA approaches, NeurOLight, struggle with predicting high-fidelity fields for real-world complicated photonic devices, with the best reported 0.38 normalized mean absolute error in NeurOLight. The inter-plays of highly complex light-matter interaction, e.g., scattering and resonance, sensitivity to local structure details, non-uniform learning complexity for full-domain simulation, and rich frequency information, contribute to the failure of existing neural PDE solvers. In this work, we boost the prediction fidelity to an unprecedented level for simulating complex photonic devices with a novel operator design driven by the above challenges. We propose a novel cross-axis factorized PACE operator with a strong long-distance modeling capacity to connect the full-domain complex field pattern with local device structures. Inspired by human learning, we further divide and conquer the simulation task for extremely hard cases into two progressively easy tasks, with a first-stage model learning an initial solution refined by a second model. On various complicated photonic device benchmarks, we demonstrate one sole PACE model is capable of achieving 73% lower error with 50% fewer parameters compared with various recent ML for PDE solvers. The two-stage setup further advances high-fidelity simulation for even more intricate cases. In terms of runtime, PACE demonstrates 154-577x and 11.8-12x simulation speedup over numerical solver using scipy or highly-optimized pardiso solver, respectively. We open sourced the code and dataset.

Dexterous robotic manipulation remains a significant challenge due to the high dimensionality and complexity of hand movements required for tasks like in-hand manipulation and object grasping. This paper addresses this issue by introducing Vector Quantized Action Chunking Embedding (VQ-ACE), a novel framework that compresses human hand motion into a quantized latent space, significantly reducing the action space's dimensionality while preserving key motion characteristics. By integrating VQ-ACE with both Model Predictive Control (MPC) and Reinforcement Learning (RL), we enable more efficient exploration and policy learning in dexterous manipulation tasks using a biomimetic robotic hand. Our results show that latent space sampling with MPC produces more human-like behavior in tasks such as Ball Rolling and Object Picking, leading to higher task success rates and reduced control costs. For RL, action chunking accelerates learning and improves exploration, demonstrated through faster convergence in tasks like cube stacking and in-hand cube reorientation. These findings suggest that VQ-ACE offers a scalable and effective solution for robotic manipulation tasks involving complex, high-dimensional state spaces, contributing to more natural and adaptable robotic systems.

High-speed flight vehicles, which travel much faster than the speed of sound, are crucial for national defense and space exploration. However, accurately predicting their behavior under numerous, varied flight conditions is a challenge and often prohibitively expensive. The proposed approach involves creating smarter, more efficient machine learning models (also known as surrogate models or meta models) that can fuse data generated from a variety of fidelity levels -- to include engineering methods, simulation, wind tunnel, and flight test data -- to make more accurate predictions. These models are able to move the bulk of the computation from high performance computing (HPC) to single user machines (laptop, desktop, etc.). The project builds upon previous work but introduces code improvements and an informed perspective on the direction of the field. The new surrogate modeling framework is now modular and, by design, broadly applicable to many modeling problems. The new framework also has a more robust automatic hyperparameter tuning capability and abstracts away most of the pre- and post-processing tasks. The Gaussian process regression and deep neural network-based models included in the presented framework were able to model two datasets with high accuracy (R^2>0.99). The primary conclusion is that the framework is effective and has been delivered to the Air Force for integration into real-world projects. For future work, significant and immediate investment in continued research is crucial. The author recommends further testing and refining modeling methods that explicitly incorporate physical laws and are robust enough to handle simulation and test data from varying resolutions and sources, including coarse meshes, fine meshes, unstructured meshes, and limited experimental test points.

This paper reports a practical articulated wheeled in-pipe inspection robot "AIRo-7.1" which is waterproof and dustproof, and can adapt to 3 to 4 in inner diameters. The joint torque can be adjusted by a PWM open-loop control. The middle joint angle can be controlled by a position feedback control system while the other two joints are bent by torsional springs. Thanks to this simple and high-density design, not only downsizing of the robot but also wide range of the adaptive inner diameter were achieved. However, the relationship between the actual middle joint torque value and the PWM duty ratio should be pre-known because the reducer used in AIRo-7.1 was designed by ourselves. Therefore, preliminary experiments were conducted to clarify the relationship between them. To examine the adaptive movement, experiments in both 3 in and 4 in pipes with vertical, bend, and diameter change sections. Finally, field experiment was also conducted. From the results, high adaptability to different inner diameters of pipes and slippery environments were confirmed although waterproof and dustproof were not perfectly working.

Remote sensing has evolved from simple image acquisition to complex systems capable of integrating and processing visual and textual data. This review examines the development and application of multi-modal language models (MLLMs) in remote sensing, focusing on their ability to interpret and describe satellite imagery using natural language. We cover the technical underpinnings of MLLMs, including dual-encoder architectures, Transformer models, self-supervised and contrastive learning, and cross-modal integration. The unique challenges of remote sensing data--varying spatial resolutions, spectral richness, and temporal changes--are analyzed for their impact on MLLM performance. Key applications such as scene description, object detection, change detection, text-to-image retrieval, image-to-text generation, and visual question answering are discussed to demonstrate their relevance in environmental monitoring, urban planning, and disaster response. We review significant datasets and resources supporting the training and evaluation of these models. Challenges related to computational demands, scalability, data quality, and domain adaptation are highlighted. We conclude by proposing future research directions and technological advancements to further enhance MLLM utility in remote sensing.

This paper shows how an uncertainty-aware, deep neural network can be trained to detect, recognise and localise objects in 2D RGB images, in applications lacking annotated train-ng datasets. We propose a self-supervising teacher-student pipeline, in which a relatively simple teacher classifier, trained with only a few labelled 2D thumbnails, automatically processes a larger body of unlabelled RGB-D data to teach a student network based on a modified YOLOv3 architecture. Firstly, 3D object detection with back projection is used to automatically extract and teach 2D detection and localisation information to the student network. Secondly, a weakly supervised 2D thumbnail classifier, with minimal training on a small number of hand-labelled images, is used to teach object category recognition. Thirdly, we use a Gaussian Process GP to encode and teach a robust uncertainty estimation functionality, so that the student can output confidence scores with each categorization. The resulting student significantly outperforms the same YOLO architecture trained directly on the same amount of labelled data. Our GP-based approach yields robust and meaningful uncertainty estimations for complex industrial object classifications. The end-to-end network is also capable of real-time processing, needed for robotics applications. Our method can be applied to many important industrial tasks, where labelled datasets are typically unavailable. In this paper, we demonstrate an example of detection, localisation, and object category recognition of nuclear mixed-waste materials in highly cluttered and unstructured scenes. This is critical for robotic sorting and handling of legacy nuclear waste, which poses complex environmental remediation challenges in many nuclearised nations.

Generative Artificial Intelligence (AI) technologies are in a phase of unprecedented rapid development following the landmark release of Chat-GPT, which brought the phenomenon to wide public attention. As the deployment of AI products rises geometrically, considerable attention is being given to the threats and opportunities that AI technologies offer, and to the need for regulatory and standards initiatives to ensure that use of the technology aligns with societal needs and generates broad benefits while mitigating risks and threats. This manuscript is the third of a series of White Papers informing the development of IEEE-SA's p3995 {\it `Standard for the Implementation of Safeguards, Controls, and Preventive Techniques for Artificial Intelligence Models'} \cite{P3395}, Chair Marina Cort\^{e}s. This part focuses on assessing calmly and objectively, as far as is possible, the current state of Artificial Intelligence (AI) technology development and identifying predominant trends, prospects, and ensuing risks. It necessarily forms a snapshot of the current instant of a rapidly-evolving landscape, with new products and innovations emerging continuously. While our main focus is on software and hardware developments and their corporate context, we also briefly review progress on robotics within the AI context and describe some implications of the substantial and growing AI energy demand.

The energy use of a robot is trajectory-dependent, and thus can be reduced by optimization of the trajectory. Current methods for robot trajectory optimization can reduce energy up to 15\% for fixed start and end points, however their use in industrial robot planning is still restricted due to model complexity and lack of integration with planning tools which address other concerns (e.g. collision avoidance). We propose an approach that uses differentiable inertial and kinematic models from standard open-source tools, integrating with standard ROS planning methods. An inverse dynamics-based energy model is optionally extended with a single-parameter electrical model, simplifying the model identification process. We compare the inertial and electrical models on a collaborative robot, showing that simplified models provide competitive accuracy and are easier to deploy in practice.