Natural organisms can convert environmental stimuli into sensory feedback to regulate their body and realize active adaptivity. However, realizing such a feedback-regulation mechanism in synthetic material systems remains a grand challenge. It is believed that achieving complex feedback mechanisms in responsive materials will pave the way toward autonomous, intelligent structure and actuation without complex electronics. Inspired by living systems, we report a general principle to design and construct such feedback loops in light-responsive materials. Specifically, we design a baffle-actuator mechanism to incorporate programmed feedback into the opto-mechanical responsiveness. By simply addressing the baffle position with respect to the incident light beam, positive and negative feedback are programmed. We demonstrate the transformation of a light-bending strip into a switcher, where the intensity of light determines the energy barrier under positive feedback, realizing multi-stable shape-morphing. By leveraging the negative feedback and associated homeostasis, we demonstrate two soft robots, i.e., a locomotor and a swimmer. Furthermore, we unveil the ubiquity of feedback in light-responsive materials, which provides new insight into self-regulated robotic matters. Teaser Positive and negative photomechanical feedback is readily programmed in a soft actuator. MAIN TEXT Introduction Responsive materials can sense, respond to, and interact with their external environment, unlike traditional static material, which faces difficulties in altering their inherent properties.

The extensive application of Large Language Models (LLMs) in generative coding tasks has raised concerns due to their high computational demands and energy consumption. Unlike previous structural pruning methods designed for classification models that deal with lowdimensional classification logits, generative Code LLMs produce high-dimensional token logit sequences, making traditional pruning objectives inherently limited. Moreover, existing single component pruning approaches further constrain the effectiveness when applied to generative Code LLMs. In response, we propose Flab-Pruner, an innovative unified structural pruning method that combines vocabulary, layer, and Feed-Forward Network (FFN) pruning. This approach effectively reduces model parameters while maintaining performance. Additionally, we introduce a customized code instruction data strategy for coding tasks to enhance the performance recovery efficiency of the pruned model. Through extensive evaluations on three state-of-the-art Code LLMs across multiple generative coding tasks, the results demonstrate that Flab-Pruner retains 97% of the original performance after pruning 22% of the parameters and achieves the same or even better performance after post-training. The pruned models exhibit significant improvements in storage, GPU usage, computational efficiency, and environmental impact, while maintaining well robustness. Our research provides a sustainable solution for green software engineering and promotes the efficient deployment of LLMs in real-world generative coding intelligence applications.

To overcome the performance limitations in modern computing, such as the power wall, emerging computing paradigms are gaining increasing importance. Approximate computing offers a promising solution by substantially enhancing energy efficiency and reducing latency, albeit with a trade-off in accuracy. Another emerging method is memristor-based In-Memory Computing (IMC) which has the potential to overcome the Von Neumann bottleneck. In this work, we combine these two approaches and propose two Serial APProximate IMPLY-based full adders (SAPPI). When embedded in a Ripple Carry Adder (RCA), our designs reduce the number of steps by 39%-41% and the energy consumption by 39%-42% compared to the exact algorithm. We evaluated our approach at the circuit level and compared it with State-of-the-Art (SoA) approximations where our adders improved the speed by up to 10% and the energy efficiency by up to 13%. We applied our designs in three common image processing applications where we achieved acceptable image quality with up to half of the RCA approximated. We performed a case study to demonstrate the applicability of our approximations in Machine Learning (ML) underscoring the potential gains in more complex scenarios. The proposed approach demonstrates energy savings of up to 296 mJ (21%) and a reduction of 1.3 billion (20%) computational steps when applied to Convolutional Neural Networks (CNNs) trained on the MNIST dataset while maintaining accuracy.

Urban morphology, examining city spatial configurations, links urban design to sustainability. Morphology metrics play a fundamental role in performance-driven computational urban design (CUD) which integrates urban form generation, performance evaluation and optimization. However, a critical gap remains between performance evaluation and complex urban form generation, caused by the disconnection between morphology metrics and urban form, particularly in metric-to-form workflows. It prevents the application of optimized metrics to generate improved urban form with enhanced urban performance. Formulating morphology metrics that not only effectively characterize complex urban forms but also enable the reconstruction of diverse forms is of significant importance. This paper highlights the importance of establishing a bi-directional mapping between morphology metrics and complex urban form to enable the integration of urban form generation with performance evaluation. We present an approach that can 1) formulate morphology metrics to both characterize urban forms and in reverse, retrieve diverse similar 3D urban forms, and 2) evaluate the effectiveness of morphology metrics in representing 3D urban form characteristics of blocks by comparison. We demonstrate the methodology with 3D urban models of New York City, covering 14,248 blocks. We use neural networks and information retrieval for morphology metric encoding, urban form clustering and morphology metric evaluation. We identified an effective set of morphology metrics for characterizing block-scale urban forms through comparison. The proposed methodology tightly couples complex urban forms with morphology metrics, hence it can enable a seamless and bidirectional relationship between urban form generation and optimization in performance-driven urban design towards sustainable urban design and planning.

This paper thoroughly surveys machine learning (ML) algorithms acceleration in hardware accelerators, focusing on Field-Programmable Gate Arrays (FPGAs). It reviews 287 out of 1138 papers from the past six years, sourced from four top FPGA conferences. Such selection underscores the increasing integration of ML and FPGA technologies and their mutual importance in technological advancement. Research clearly emphasises inference acceleration (81\%) compared to training acceleration (13\%). Additionally, the findings reveals that CNN dominates current FPGA acceleration research while emerging models like GNN show obvious growth trends. The categorization of the FPGA research papers reveals a wide range of topics, demonstrating the growing relevance of ML in FPGA research. This comprehensive analysis provides valuable insights into the current trends and future directions of FPGA research in the context of ML applications.

To address the challenges of imbalanced multi-class datasets typically used for rare event detection in critical cyber-physical systems, we propose an optimal, efficient, and adaptable mixed integer programming (MIP) ensemble weighting scheme. Our approach leverages the diverse capabilities of the classifier ensemble on a granular per class basis, while optimizing the weights of classifier-class pairs using elastic net regularization for improved robustness and generalization. Additionally, it seamlessly and optimally selects a predefined number of classifiers from a given set. We evaluate and compare our MIP-based method against six well-established weighting schemes, using representative datasets and suitable metrics, under various ensemble sizes. The experimental results reveal that MIP outperforms all existing approaches, achieving an improvement in balanced accuracy ranging from 0.99% to 7.31%, with an overall average of 4.53% across all datasets and ensemble sizes. Furthermore, it attains an overall average increase of 4.63%, 4.60%, and 4.61% in macro-averaged precision, recall, and F1-score, respectively, while maintaining computational efficiency.

It looks like a cross between a toy airplane and a drone, but this British solar-powered aircraft could be the future of aerial surveillance. PHASA-35, built by British company BAE Systems, is a 150kg solar-electric aircraft that can quietly cruise through the stratosphere for months at a time. Named after its 35-metre wingspan, the unmanned aerial vehicle (UAV) travels at a maximum height of 70,000 feet, at a leisurely speed of 55mph. Designed as a cheaper and lighter alternative to satellites, it can be used for Earth observation and surveillance, border control, communications and disaster relief. Now, BAE Systems reveals that PHASA-35 has just completed a second round of test flights into the stratosphere – the second layer of Earth's atmosphere.

In science and engineering, machine learning techniques are increasingly successful in physical systems modeling (predicting future states of physical systems). Effectively integrating PDE loss as a constraint of system transition can improve the model's prediction by overcoming generalization issues due to data scarcity, especially when data acquisition is costly. However, in many real-world scenarios, due to sensor limitations, the data we can obtain is often only partial observation, making the calculation of PDE loss seem to be infeasible, as the PDE loss heavily relies on high-resolution states. We carefully study this problem and propose a novel framework named Re-enable PDE Loss under Partial Observation (RPLPO). The key idea is that although enabling PDE loss to constrain system transition solely is infeasible, we can re-enable PDE loss by reconstructing the learnable high-resolution state and constraining system transition simultaneously. Specifically, RPLPO combines an encoding module for reconstructing learnable high-resolution states with a transition module for predicting future states. The two modules are jointly trained by data and PDE loss. We conduct experiments in various physical systems to demonstrate that RPLPO has significant improvement in generalization, even when observation is sparse, irregular, noisy, and PDE is inaccurate.

At the heart of neural network force fields (NNFFs) is the architecture of neural networks, where the capacity to model complex interactions is typically enhanced through widening or deepening multilayer perceptrons (MLPs) or by increasing layers of graph neural networks (GNNs). These enhancements, while improving the model's performance, often come at the cost of a substantial increase in the number of parameters. By applying the Trainable Adaptive Activation Function Structure (TAAFS), we introduce a method that selects distinct mathematical formulations for non-linear activations, thereby increasing the precision of NNFFs with an insignificant addition to the parameter count. In this study, we integrate TAAFS into a variety of neural network models, resulting in observed accuracy improvements, and further validate these enhancements through molecular dynamics (MD) simulations using DeepMD.

Robotic hands offer advanced manipulation capabilities, while their complexity and cost often limit their real-world applications. In contrast, simple parallel grippers, though affordable, are restricted to basic tasks like pick-and-place. Recently, a vibration-based mechanism was proposed to augment parallel grippers and enable in-hand manipulation capabilities for thin objects. By utilizing the stick-slip phenomenon, a simple controller was able to drive a grasped object to a desired position. However, due to the underactuated nature of the mechanism, direct control of the object's orientation was not possible. In this letter, we address the challenge of manipulating the entire state of the object. Hence, we present the excitation of a cyclic phenomenon where the object's center-of-mass rotates in a constant radius about the grasping point. With this cyclic motion, we propose an algorithm for manipulating the object to desired states. In addition to a full analytical analysis of the cyclic phenomenon, we propose the use of duty cycle modulation in operating the vibration actuator to provide more accurate manipulation. Finite element analysis, experiments and task demonstrations validate the proposed algorithm.