Whole-body manipulation is a powerful yet underexplored approach that enables robots to interact with large, heavy, or awkward objects using more than just their end-effectors. Soft robots, with their inherent passive compliance, are particularly well-suited for such contact-rich manipulation tasks, but their uncertainties in kinematics and dynamics pose significant challenges for simulation and control. In this work, we address this challenge with a simulation that can run up to 350x real time on a single thread in MuJoCo and provide a detailed analysis of the critical tradeoffs between speed and accuracy for this simulation. Using this framework, we demonstrate a successful zero-shot sim-to-real transfer of a learned whole-body manipulation policy, achieving an 88% success rate on the Baloo hardware platform. We show that guiding RL with a simple motion primitive is critical to this success where standard reward shaping methods struggled to produce a stable and successful policy for whole-body manipulation. Furthermore, our analysis reveals that the learned policy does not simply mimic the motion primitive. It exhibits beneficial reactive behavior, such as re-grasping and perturbation recovery. We analyze and contrast this learned policy against an open-loop baseline to show that the policy can also exhibit aggressive over-corrections under perturbation. To our knowledge, this is the first demonstration of forceful, six-DoF whole-body manipulation using two continuum soft arms on a large-scale platform (10 kg payloads), with zero-shot policy transfer.

Large-scale numerical simulations underpin modern scientific discovery but remain constrained by prohibitive computational costs. AI surrogates offer acceleration, yet adoption in mission-critical settings is limited by concerns over physical plausibility, trustworthiness, and the fusion of heterogeneous data. We introduce PHASE, a modular deep-learning framework for physics-integrated, heterogeneity-aware surrogates in scientific simulations. PHASE combines data-type-aware encoders for heterogeneous inputs with multi-level physics-based constraints that promote consistency from local dynamics to global system behavior. Using only the first 20 simulation years, PHASE infers a near-equilibrium state that otherwise requires more than 1,200 years of integration, yielding an effective reduction in required integration length by at least 60 . The framework is enabled by a pipeline for fusing heterogeneous scientific data and demonstrates strong generalization to higher spatial resolutions with minimal fine-tuning. These results indicate that PHASE captures governing physical regularities rather than surface correlations, enabling practical, physically consistent acceleration of land-surface modeling and other complex scientific workflows. Numerical simulations, mainly grounded in domain knowledge and partial differential equations (PDEs), are fundamental pillars of modern scientific discovery, driving advances in fields from climate modeling to materials design (Hao et al., 2024; Koehler et al., 2024; Danabasoglu et al., 2020; Pathak et al., 2020; Reichstein et al., 2019).

Deploying Large Language Models (LLMs) on mobile devices faces the challenge of insufficient performance in smaller models and excessive resource consumption in larger ones. This paper highlights that mobile Neural Processing Units (NPUs) have underutilized computational resources, particularly their matrix multiplication units, during typical LLM inference. To leverage this wasted compute capacity, we propose applying parallel test-time scaling techniques on mobile NPUs to enhance the performance of smaller LLMs. However, this approach confronts inherent NPU challenges, including inadequate hardware support for fine-grained quantization and low efficiency in general-purpose computations. To overcome these, we introduce two key techniques: a hardware-aware tile quantization scheme that aligns group quantization with NPU memory access patterns, and efficient LUT-based replacements for complex operations such as Softmax and dequantization. We design and implement an end-to-end inference system that leverages the NPU's compute capability to support test-time scaling on Qualcomm Snapdragon platforms. Experiments show our approach brings significant speedups: up to 19.0 for mixed-precision GEMM and 2.2 for Softmax. More importantly, we demonstrate that smaller models using test-time scaling can match or exceed the accuracy of larger models, achieving a new performance-cost Pareto frontier.

Regression is essential across many domains but remains challenging in high-dimensional settings, where existing methods often lose spatial structure or demand heavy storage. In this work, we address the problem of matrix-valued regression, where each sample is naturally represented as a matrix. We propose MELCOT, a hybrid model that integrates a classical machine learning-based Marginal Estimation (ME) block with a deep learning-based Learnable-Cost Optimal Transport (LCOT) block. The ME block estimates data marginals to preserve spatial information, while the LCOT block learns complex global features. This design enables MELCOT to inherit the strengths of both classical and deep learning methods. Extensive experiments across diverse datasets and domains demonstrate that MELCOT consistently outperforms all baselines while remaining highly efficient.

Abstract-- This paper presents the framework GUARD (Guided robot control via Uncertainty attribution and probAbilistic kernel optimization for Risk-aware Decision making) that combines traditional control with an uncertainty-aware perception technique using active learning with real-time capability for safe robot collision avoidance. By doing so, this manuscript addresses the central challenge in robotics of finding a reasonable compromise between traditional methods and learning algorithms to foster the development of safe, yet efficient and flexible applications. By unifying a reactive model predictive countouring control (RMPCC) with an Iterative Closest Point (ICP) algorithm that enables the attribution of uncertainty sources online using active learning with real-time capability via a probabilistic kernel optimization technique, GUARD inherently handles the existing ambiguity of the term safety that exists in robotics literature. Experimental studies indicate the high performance of GUARD, thereby highlighting the relevance and need to broaden its applicability in future. Developing safe and flexible robot applications is a central, yet open issue in robotics.

Quadruped robots are designed to achieve agile locomotion by mimicking legged animals. However, existing control methods for quadrupeds often lack one of the key capabilities observed in animals: adaptive and adjustable compliance in response to external disturbances. Most locomotion controllers do not provide tunable compliance and tend to fail under large perturbations. In this work, we propose a switched policy framework for compliant and safe quadruped locomotion. First, we train a force compliant policy with adjustable compliance levels using a teacher student reinforcement learning framework, eliminating the need for explicit force sensing. Next, we develop a safe policy based on the capture point concept to stabilize the robot when the compliant policy fails. Finally, we introduce a recoverability network that predicts the likelihood of failure and switches between the compliant and safe policies. Together, this framework enables quadruped robots to achieve both force compliance and robust safety when subjected to severe external disturbances.

Transformer-based architectures dominate time series modeling by enabling global attention over all timestamps, yet their rigid 'one-size-fits-all' context aggregation fails to address two critical challenges in real-world data: (1) inherent lag effects, where the relevance of historical timestamps to a query varies dynamically; (2) anomalous segments, which introduce noisy signals that degrade forecasting accuracy. To resolve these problems, we propose the Temporal Mix of Experts (TMOE), a novel attention-level mechanism that reimagines key-value (K-V) pairs as local experts (each specialized in a distinct temporal context) and performs adaptive expert selection for each query via localized filtering of irrelevant timestamps. Complementing this local adaptation, a shared global expert preserves the Transformer's strength in capturing long-range dependencies. We then replace the vanilla attention mechanism in popular time-series Transformer frameworks (i.e., PatchTST and Timer) with TMOE, without extra structural modifications, yielding our specific version TimeExpert and general version TimeExpert-G. Extensive experiments on seven real-world long-term forecasting benchmarks demonstrate that TimeExpert and TimeExpert-G outperform state-of-the-art methods. Code is available at https://github.com/xwmaxwma/TimeExpert.

Conventional Wi-Fi received signal strength indicator (RSSI) fingerprinting cannot meet the growing demand for accurate indoor localization and navigation due to its lower accuracy, while solutions based on light detection and ranging (LiDAR) can provide better localization performance but is limited by their higher deployment cost and complexity. To address these issues, we propose a novel indoor localization and navigation framework integrating Wi-Fi RSSI fingerprinting, LiDAR-based simultaneous localization and mapping (SLAM), and inertial measurement unit (IMU) navigation based on an extended Kalman filter (EKF). Specifically, coarse localization by deep neural network (DNN)-based Wi-Fi RSSI fingerprinting is refined by IMU-based dynamic positioning using a Gmapping-based SLAM to generate an occupancy grid map and output high-frequency attitude estimates, which is followed by EKF prediction-update integrating sensor information while effectively suppressing Wi-Fi-induced noise and IMU drift errors. Multi-group real-world experiments conducted on the IR building at Xi'an Jiaotong-Liverpool University demonstrates that the proposed multi-sensor fusion framework suppresses the instability caused by individual approaches and thereby provides stable accuracy across all path configurations with mean two-dimensional (2D) errors ranging from 0.2449 m to 0.3781 m. In contrast, the mean 2D errors of Wi-Fi RSSI fingerprinting reach up to 1.3404 m in areas with severe signal interference, and those of LiDAR/IMU localization are between 0.6233 m and 2.8803 m due to cumulative drift.

Abstract--End-of-Life (EoL) phones significantly exacerbate global e-waste challenges due to their high production volumes and short lifecycles. Disassembly is among the most critical processes in EoL phone recycling. However, it relies heavily on human labor due to product variability. Consequently, the manual process is both labor-intensive and time-consuming. In this paper, we propose a low-cost, easily deployable automated and selective disassembly and sorting system for EoL phones, consisting of three subsystems: an adaptive cutting system, a vision-based robotic sorting system, and a battery removal system. The system can process over 120 phones per hour with an average disassembly success rate of 98.9%, efficiently delivering selected high-value components to downstream processing. It provides a reliable and scalable automated solution to the pressing challenge of EoL phone disassembly. Additionally, the automated system can enhance disassembly economics, converting a previously unprofitable process into one that yields a net profit per unit weight of EoL phones. E-waste presents a global challenge due to its rapid growth, high resource value, and the severe environmental and health risks from improper recycling and hazardous substances [1-3]. Global e-waste surged to a record 62 million tonnes in 2022 and is expected to reach 82 million tonnes by 2030 [4]. Recycling converts e-waste components into valuable raw materials, which is critical for addressing the escalating e-waste problem and supporting a sustainable circular economy [5-10]. Nevertheless, only 22.3 % of e-waste was recorded as recycled in 2022 [4]. The high human labor cost and health risk concerns are the major challenges associated with the recycling process [11]. This material is based upon work supported by the REMADE Institute, USA (21-01-RM-5083).

Floods are increasingly frequent natural disasters causing extensive human and economic damage, highlighting the critical need for rapid and accurate flood inundation mapping. While remote sensing technologies have advanced flood monitoring capabilities, operational challenges persist: single-sensor approaches face weather-dependent data availability and limited revisit periods, while multi-sensor fusion methods require substantial computational resources and large-scale labeled datasets. To address these limitations, this study introduces a novel sensor-flexible flood detection methodology by fine-tuning Presto, a lightweight ($\sim$0.4M parameters) multi-modal pre-trained transformer that processes both Synthetic Aperture Radar (SAR) and multispectral (MS) data at the pixel level. Our approach uniquely enables flood mapping using SAR-only, MS-only, or combined SAR+MS inputs through a single model architecture, addressing the critical operational need for rapid response with whatever sensor data becomes available first during disasters. We evaluated our method on the Sen1Floods11 dataset against the large-scale Prithvi-100M baseline ($\sim$100M parameters) across three realistic data availability scenarios. The proposed model achieved superior performance with an F1 score of 0.896 and mIoU of 0.886 in the optimal sensor-fusion scenario, outperforming the established baseline. Crucially, the model demonstrated robustness by maintaining effective performance in MS-only scenarios (F1: 0.893) and functional capabilities in challenging SAR-only conditions (F1: 0.718), confirming the advantage of multi-modal pre-training for operational flood mapping. Our parameter-efficient, sensor-flexible approach offers an accessible and robust solution for real-world disaster scenarios requiring immediate flood extent assessment regardless of sensor availability constraints.