Accurate short-term predictions of phase-resolved water wave conditions are crucial for decision-making in ocean engineering. However, the initialization of remote-sensing-based wave prediction models first requires a reconstruction of wave surfaces from sparse measurements like radar. Existing reconstruction methods either rely on computationally intensive optimization procedures or simplistic modelling assumptions that compromise the real-time capability or accuracy of the subsequent prediction process. We therefore address these issues by proposing a novel approach for phase-resolved wave surface reconstruction using neural networks based on the U-Net and Fourier neural operator (FNO) architectures. Our approach utilizes synthetic yet highly realistic training data on uniform one-dimensional grids, that is generated by the high-order spectral method for wave simulation and a geometric radar modelling approach. The investigation reveals that both models deliver accurate wave reconstruction results and show good generalization for different sea states when trained with spatio-temporal radar data containing multiple historic radar snapshots in each input. Notably, the FNO demonstrates superior performance in handling the data structure imposed by wave physics due to its global approach to learn the mapping between input and output in Fourier space.

Existing satellite remote sensing change detection (CD) methods often crop original large-scale bi-temporal image pairs into small patch pairs and then use pixel-level CD methods to fairly process all the patch pairs. However, due to the sparsity of change in large-scale satellite remote sensing images, existing pixel-level CD methods suffer from a waste of computational cost and memory resources on lots of unchanged areas, which reduces the processing efficiency of on-board platform with extremely limited computation and memory resources. To address this issue, we propose a lightweight patch-level CD network (LPCDNet) to rapidly remove lots of unchanged patch pairs in large-scale bi-temporal image pairs. This is helpful to accelerate the subsequent pixel-level CD processing stage and reduce its memory costs. In our LPCDNet, a sensitivity-guided channel pruning method is proposed to remove unimportant channels and construct the lightweight backbone network on basis of ResNet18 network. Then, the multi-layer feature compression (MLFC) module is designed to compress and fuse the multi-level feature information of bi-temporal image patch. The output of MLFC module is fed into the fully-connected decision network to generate the predicted binary label. Finally, a weighted cross-entropy loss is utilized in the training process of network to tackle the change/unchange class imbalance problem. Experiments on two CD datasets demonstrate that our LPCDNet achieves more than 1000 frames per second on an edge computation platform, i.e., NVIDIA Jetson AGX Orin, which is more than 3 times that of the existing methods without noticeable CD performance loss. In addition, our method reduces more than 60% memory costs of the subsequent pixel-level CD processing stage.

While reliable data-driven decision-making hinges on high-quality labeled data, the acquisition of quality labels often involves laborious human annotations or slow and expensive scientific measurements. Machine learning is becoming an appealing alternative as sophisticated predictive techniques are being used to quickly and cheaply produce large amounts of predicted labels; e.g., predicted protein structures are used to supplement experimentally derived structures, predictions of socioeconomic indicators from satellite imagery are used to supplement accurate survey data, and so on. Since predictions are imperfect and potentially biased, this practice brings into question the validity of downstream inferences. We introduce cross-prediction: a method for valid inference powered by machine learning. With a small labeled dataset and a large unlabeled dataset, cross-prediction imputes the missing labels via machine learning and applies a form of debiasing to remedy the prediction inaccuracies. The resulting inferences achieve the desired error probability and are more powerful than those that only leverage the labeled data. Closely related is the recent proposal of prediction-powered inference, which assumes that a good pre-trained model is already available. We show that cross-prediction is consistently more powerful than an adaptation of prediction-powered inference in which a fraction of the labeled data is split off and used to train the model. Finally, we observe that cross-prediction gives more stable conclusions than its competitors; its confidence intervals typically have significantly lower variability.

The application of machine learning (ML) in a range of geospatial tasks is increasingly common but often relies on globally available covariates such as satellite imagery that can either be expensive or lack predictive power. Here we explore the question of whether the vast amounts of knowledge found in Internet language corpora, now compressed within large language models (LLMs), can be leveraged for geospatial prediction tasks. We first demonstrate that LLMs embed remarkable spatial information about locations, but naively querying LLMs using geographic coordinates alone is ineffective in predicting key indicators like population density. We then present GeoLLM, a novel method that can effectively extract geospatial knowledge from LLMs with auxiliary map data from OpenStreetMap. We demonstrate the utility of our approach across multiple tasks of central interest to the international community, including the measurement of population density and economic livelihoods. Across these tasks, our method demonstrates a 70% improvement in performance (measured using Pearson's r With GeoLLM, we observe that GPT-3.5 outperforms Llama 2 and RoBERTa by 19% and 51% respectively, suggesting that the performance of our method scales well with the size of the model and its pretraining dataset. Our experiments reveal that LLMs are remarkably sample-efficient, rich in geospatial information, and robust across the globe. Crucially, GeoLLM shows promise in mitigating the limitations of existing geospatial covariates and complementing them well. The covariates used in these predictions include geographical coordinates, remote sensing data, satellite imagery, human mobility data (Chang et al., 2022), and phone metadata (Blumenstock et al., 2015; Burke et al., 2019). While having access to quality covariates is essential, it can be challenging due to limited spatiotemporal coverage, high costs, and accessibility barriers (Ball et al., 2017).

With its vast expanse, exceeding that of Western Europe by twice, the Amazon rainforest stands as the largest forest of the Earth, holding immense importance in global climate regulation. Yet, deforestation detection from remote sensing data in this region poses a critical challenge, often hindered by the persistent cloud cover that obscures optical satellite data for much of the year. Addressing this need, this paper proposes three deep-learning models tailored for deforestation monitoring, utilizing SAR (Synthetic Aperture Radar) multitemporal data moved by its independence on atmospheric conditions. Specifically, the study proposes three novel recurrent fully convolutional network architectures-namely, RRCNN-1, RRCNN-2, and RRCNN-3, crafted to enhance the accuracy of deforestation detection. Additionally, this research explores replacing a bitemporal with multitemporal SAR sequences, motivated by the hypothesis that deforestation signs quickly fade in SAR images over time. A comprehensive assessment of the proposed approaches was conducted using a Sentinel-1 multitemporal sequence from a sample site in the Brazilian rainforest. The experimental analysis confirmed that analyzing a sequence of SAR images over an observation period can reveal deforestation spots undetectable in a pair of images. Notably, experimental results underscored the superiority of the multitemporal approach, yielding approximately a five percent enhancement in F1-Score across all tested network architectures. Particularly the RRCNN-1 achieved the highest accuracy and also boasted half the processing time of its closest counterpart.

Geospatial sciences include a wide range of applications, from environmental monitoring transportation to infrastructure planning, as well as location-based analysis and services. Graph theory algorithms in mathematics have emerged as indispensable tools in these domains due to their capability to model and analyse spatial relationships efficiently. This article explores the applications of graph theory algorithms in geospatial sciences, highlighting their role in network analysis, spatial connectivity, geographic information systems, and various other spatial problem-solving scenarios like digital twin. The article provides a comprehensive idea about graph theory's key concepts and algorithms that assist the geospatial modelling processes and insights into real-world geospatial challenges and opportunities. It lists the extensive research, innovative technologies and methodologies implemented in this domain. Keywords: Graph theory, Geospatial Science, Digital twin 1. Introduction Geospatial science has developed as a vibrant field characterised by intellectual vigour, conceptual expansion, and improved analytical skills as a consequence of the Quantitative Revolution in the subject of geography through a spatially integrated socio-environmental science that outshines prior disciplinary ties, borders, and limitations (Berry et al., 2008). Geospatial science, commonly referred to as geomatics (Aina 2012), is a multidisciplinary discipline that focuses on comprehending, analysing, and visualising spatial data about the Earth's surface using information technology to describe the connections between geography, individuals, places, and Earth processes. Technologies like Global Positioning System (GPS), Geographic Information Systems (GIS), and remote sensing are frequently used as observational, measuring, and analytical tools, helping in the understanding of numerous events by providing the information with a spatial context. Geospatial technology is being used increasingly in every industry today, including resource management, disaster management, forestry, logistics, infrastructure planning, and the study of climate change and other environmental issues (Dangermond and Goodchild, 2020). Geospatial technology and the information created are becoming increasingly significant in all economic sectors, making the economy, society, and the environment an indispensable pillar of sustainable development. (Scott and Rajabifard, 2017).

Foundation models have excelled in various tasks but are often evaluated on general benchmarks. The adaptation of these models for specific domains, such as remote sensing imagery, remains an underexplored area. In remote sensing, precise building instance segmentation is vital for applications like urban planning. While Convolutional Neural Networks (CNNs) perform well, their generalization can be limited. For this aim, we present a novel approach to adapt foundation models to address existing models' generalization dropback. Among several models, our focus centers on the Segment Anything Model (SAM), a potent foundation model renowned for its prowess in class-agnostic image segmentation capabilities. We start by identifying the limitations of SAM, revealing its suboptimal performance when applied to remote sensing imagery. Moreover, SAM does not offer recognition abilities and thus fails to classify and tag localized objects. To address these limitations, we introduce different prompting strategies, including integrating a pre-trained CNN as a prompt generator. This novel approach augments SAM with recognition abilities, a first of its kind. We evaluated our method on three remote sensing datasets, including the WHU Buildings dataset, the Massachusetts Buildings dataset, and the AICrowd Mapping Challenge. For out-of-distribution performance on the WHU dataset, we achieve a 5.47% increase in IoU and a 4.81% improvement in F1-score. For in-distribution performance on the WHU dataset, we observe a 2.72% and 1.58% increase in True-Positive-IoU and True-Positive-F1 score, respectively. We intend to release our code repository, hoping to inspire further exploration of foundation models for domain-specific tasks within the remote sensing community.

Timely and accurate assessment of hurricane-induced building damage is crucial for effective post-hurricane response and recovery efforts. Recently, remote sensing technologies provide large-scale optical or Interferometric Synthetic Aperture Radar (InSAR) imagery data immediately after a disastrous event, which can be readily used to conduct rapid building damage assessment. Compared to optical satellite imageries, the Synthetic Aperture Radar can penetrate cloud cover and provide more complete spatial coverage of damaged zones in various weather conditions. However, these InSAR imageries often contain highly noisy and mixed signals induced by co-occurring or co-located building damage, flood, flood/wind-induced vegetation changes, as well as anthropogenic activities, making it challenging to extract accurate building damage information. In this paper, we introduced an approach for rapid post-hurricane building damage detection from InSAR imagery. This approach encoded complex causal dependencies among wind, flood, building damage, and InSAR imagery using a holistic causal Bayesian network. Based on the causal Bayesian network, we further jointly inferred the large-scale unobserved building damage by fusing the information from InSAR imagery with prior physical models of flood and wind, without the need for ground truth labels. Furthermore, we validated our estimation results in a real-world devastating hurricane -- the 2022 Hurricane Ian. We gathered and annotated building damage ground truth data in Lee County, Florida, and compared the introduced method's estimation results with the ground truth and benchmarked it against state-of-the-art models to assess the effectiveness of our proposed method. Results show that our method achieves rapid and accurate detection of building damage, with significantly reduced processing time compared to traditional manual inspection methods.

EMANTIC segmentation, as a significant task in image processing, has found application in various practical the field of computer vision, has quickly become a research scenarios such as autonomous driving, precision agriculture, hotspot due to its capability to learn explicit global and longrange and urban analysis [4]. Over the past decade, inspired by semantic features [2], [5]. Nevertheless, previous studies the success of deep learning in high-level visual tasks, a have overlooked the non-local textures with low similarity, considerable amount of work has been devoted to using deep which might offer richer detail information than highly similar convolutional neural networks (DCNNs) for semantic segmentation features [13]. Additionally, although global features can be of remote sensing images [1], [8], [15]. The inherent captured, Transformer also result in higher computational characteristics of geographical objects in remote sensing images, complexity because each position's feature needs to be computed including their multi-scale nature, random appearances, and interacted with other positions.

Change detection (CD) is a critical task in studying the dynamics of ecosystems and human activities using multi-temporal remote sensing images. While deep learning has shown promising results in CD tasks, it requires a large number of labeled and paired multi-temporal images to achieve high performance. Pairing and annotating large-scale multi-temporal remote sensing images is both expensive and time-consuming. To make deep learning-based CD techniques more practical and cost-effective, we propose an unsupervised single-temporal CD framework based on intra- and inter-image patch exchange (I3PE). The I3PE framework allows for training deep change detectors on unpaired and unlabeled single-temporal remote sensing images that are readily available in real-world applications. The I3PE framework comprises four steps: 1) intra-image patch exchange method is based on an object-based image analysis method and adaptive clustering algorithm, which generates pseudo-bi-temporal image pairs and corresponding change labels from single-temporal images by exchanging patches within the image; 2) inter-image patch exchange method can generate more types of land-cover changes by exchanging patches between images; 3) a simulation pipeline consisting of several image enhancement methods is proposed to simulate the radiometric difference between pre- and post-event images caused by different imaging conditions in real situations; 4) self-supervised learning based on pseudo-labels is applied to further improve the performance of the change detectors in both unsupervised and semi-supervised cases. Extensive experiments on two large-scale datasets demonstrate that I3PE outperforms representative unsupervised approaches and achieves F1 value improvements of 10.65% and 6.99% to the SOTA method. Moreover, I3PE can improve the performance of the ... (see the original article for full abstract)