Coral reefs are rapidly declining due to anthropogenic pressures such as climate change, underscoring the urgent need for scalable, automated monitoring. We introduce ReefNet, a large public coral reef image dataset with point-label annotations mapped to the World Register of Marine Species (WoRMS). ReefNet aggregates imagery from 76 curated CoralNet sources and an additional site from Al Wajh in the Red Sea, totaling approximately 925000 genus-level hard coral annotations with expert-verified labels. Unlike prior datasets, which are often limited by size, geography, or coarse labels and are not ML-ready, ReefNet offers fine-grained, taxonomically mapped labels at a global scale to WoRMS. We propose two evaluation settings: (i) a within-source benchmark that partitions each source's images for localized evaluation, and (ii) a cross-source benchmark that withholds entire sources to test domain generalization. We analyze both supervised and zero-shot classification performance on ReefNet and find that while supervised within-source performance is promising, supervised performance drops sharply across domains, and performance is low across the board for zero-shot models, especially for rare and visually similar genera. This provides a challenging benchmark intended to catalyze advances in domain generalization and fine-grained coral classification. We will release our dataset, benchmarking code, and pretrained models to advance robust, domain-adaptive, global coral reef monitoring and conservation.

Past efforts to map the Medline database have been limited to small subsets of the available data because of the exponentially increasing memory and processing demands of existing algorithms. We designed a novel algorithm for sparse matrix multiplication that allowed us to apply a self-organizing map to the entire Medline dataset, allowing for a more complete map of existing medical knowledge. The algorithm also increases the feasibility of refining the self-organizing map to account for changes in the dataset over time.

Coral aquaculture for reef restoration requires accurate and continuous spawn counting for resource distribution and larval health monitoring, but current methods are labor-intensive and represent a critical bottleneck in the coral production pipeline. We propose the Coral Spawn and Larvae Imaging Camera System (CSLICS), which uses low cost modular cameras and object detectors trained using human-in-the-loop labeling approaches for automated spawn counting in larval rearing tanks. This paper details the system engineering, dataset collection, and computer vision techniques to detect, classify and count coral spawn. Experimental results from mass spawning events demonstrate an F1 score of 82.4\% for surface spawn detection at different embryogenesis stages, 65.3\% F1 score for sub-surface spawn detection, and a saving of 5,720 hours of labor per spawning event compared to manual sampling methods at the same frequency. Comparison of manual counts with CSLICS monitoring during a mass coral spawning event on the Great Barrier Reef demonstrates CSLICS' accurate measurement of fertilization success and sub-surface spawn counts. These findings enhance the coral aquaculture process and enable upscaling of coral reef restoration efforts to address climate change threats facing ecosystems like the Great Barrier Reef.

Coral reefs are on the brink of collapse, with climate change, ocean acidification, and pollution leading to a projected 70-90% loss of coral species within the next decade. Restoration efforts are crucial, but their success hinges on introducing automation to upscale efforts. We present automated deployment of coral re-seeding devices powered by artificial intelligence, computer vision, and robotics. Specifically, we perform automated substrate classification, enabling detection of areas of the seafloor suitable for coral growth, thus significantly reducing reliance on human experts and increasing the range and efficiency of restoration. Real-world testing of the algorithms on the Great Barrier Reef leads to deployment accuracy of 77.8%, sub-image patch classification of 89.1%, and real-time model inference at 5.5 frames per second. Further, we present and publicly contribute a large collection of annotated substrate image data to foster future research in this area.

Neuromorphic engineering aims to advance computing by mimicking the brain's efficient processing, where data is encoded as asynchronous temporal events. This eliminates the need for a synchronisation clock and minimises power consumption when no data is present. However, many benchmarks for neuromorphic algorithms primarily focus on spatial features, neglecting the temporal dynamics that are inherent to most sequence-based tasks. This gap may lead to evaluations that fail to fully capture the unique strengths and characteristics of neuromorphic systems. In this paper, we present NeuroMorse, a temporally structured dataset designed for benchmarking neuromorphic learning systems. NeuroMorse converts the top 50 words in the English language into temporal Morse code spike sequences. Despite using only two input spike channels for Morse dots and dashes, complex information is encoded through temporal patterns in the data. The proposed benchmark contains feature hierarchy at multiple temporal scales that test the capacity of neuromorphic algorithms to decompose input patterns into spatial and temporal hierarchies. We demonstrate that our training set is challenging to categorise using a linear classifier and that identifying keywords in the test set is difficult using conventional methods.

Improving the automatic and timely recognition of construction and demolition waste (C&DW) composition is crucial for enhancing business returns, economic outcomes, and sustainability. Technologies like computer vision, artificial intelligence (AI), robotics, and internet of things (IoT) are increasingly integrated into waste processing to achieve these goals. While deep learning (DL) models show promise in recognising homogeneous C&DW piles, few studies assess their performance with mixed, highly contaminated material in commercial settings. Drawing on extensive experience at a C&DW materials recovery facility (MRF) in Sydney, Australia, we explore the challenges and opportunities in developing an advanced automated mixed C&DW management system. We begin with an overview of the evolution of waste management in the construction industry, highlighting its environmental, economic, and societal impacts. We review various C&DW analysis techniques, concluding that DL-based visual methods are the optimal solution. Additionally, we examine the progression of sensor and camera technologies for C&DW analysis as well as the evolution of DL algorithms focused on object detection and material segmentation. We also discuss C&DW datasets, their curation, and innovative methods for their creation. Finally, we share insights on C&DW visual analysis, addressing technical and commercial challenges, research trends, and future directions for mixed C&DW analysis. This paper aims to improve the efficiency of C&DW management by providing valuable insights for ongoing and future research and development efforts in this critical sector.

Labelled data are limited and self-supervised learning is one of the most important approaches for reducing labelling requirements. While it has been extensively explored in the image domain, it has so far not received the same amount of attention in the acoustic domain. Yet, reducing labelling is a key requirement for many acoustic applications. Specifically in bioacoustic, there are rarely sufficient labels for fully supervised learning available. This has led to the widespread use of acoustic recognisers that have been pre-trained on unrelated data for bioacoustic tasks. We posit that training on the actual task data and combining self-supervised pre-training with few-shot classification is a superior approach that has the ability to deliver high accuracy even when only a few labels are available. To this end, we introduce and evaluate a new architecture that combines CNN-based preprocessing with feature extraction based on state space models (SSMs). This combination is motivated by the fact that CNN-based networks alone struggle to capture temporal information effectively, which is crucial for classifying acoustic signals. SSMs, specifically S4 and Mamba, on the other hand, have been shown to have an excellent ability to capture long-range dependencies in sequence data. We pre-train this architecture using contrastive learning on the actual task data and subsequent fine-tuning with an extremely small amount of labelled data. We evaluate the performance of this proposed architecture for ($n$-shot, $n$-class) classification on standard benchmarks as well as real-world data. Our evaluation shows that it outperforms state-of-the-art architectures on the few-shot classification problem.

Elasmobranchs (sharks and rays) can be important components of marine ecosystems but are experiencing global population declines. Effective monitoring of these populations is essential to their protection. Baited Remote Underwater Video Stations (BRUVS) have been a key tool for monitoring, but require time-consuming manual analysis. To address these challenges, we developed SharkTrack, an AI-enhanced BRUVS analysis software. SharkTrack uses Convolutional Neural Networks and Multi-Object Tracking to detect and track elasmobranchs and provides an annotation pipeline to manually classify elasmobranch species and compute MaxN, the standard metric of relative abundance. We tested SharkTrack on BRUVS footage from locations unseen by the model during training. SharkTrack computed MaxN with 89% accuracy over 207 hours of footage. The semi-automatic SharkTrack pipeline required two minutes of manual classification per hour of video, a 97% reduction of manual BRUVS analysis time compared to traditional methods, estimated conservatively at one hour per hour of video. Furthermore, we demonstrate SharkTrack application across diverse marine ecosystems and elasmobranch species, an advancement compared to previous models, which were limited to specific species or locations. SharkTrack applications extend beyond BRUVS analysis, facilitating rapid annotation of unlabeled videos, aiding the development of further models to classify elasmobranch species. We provide public access to the software and an unprecedentedly diverse dataset, facilitating future research in an important area of marine conservation.

Despite being trained specifically to follow user instructions, today's language models perform poorly when instructed to produce random outputs. For example, when prompted to pick a number uniformly between one and ten Llama-2-13B-chat disproportionately favors the number five, and when tasked with picking a first name at random, Mistral-7B-Instruct chooses Avery 40 times more often than we would expect based on the U.S. population. When these language models are used for real-world tasks where diversity of outputs is crucial, such as language model assisted dataset construction, their inability to produce diffuse distributions over valid choices is a major hurdle. In this work, we propose a fine-tuning method that encourages language models to output distributions that are diffuse over valid outcomes. The methods we introduce generalize across a variety of tasks and distributions and make large language models practical for synthetic dataset generation with little human intervention.

Precise robotic weed control plays an essential role in precision agriculture. It can help significantly reduce the environmental impact of herbicides while reducing weed management costs for farmers. In this paper, we demonstrate that a custom-designed robotic spot spraying tool based on computer vision and deep learning can significantly reduce herbicide usage on sugarcane farms. We present results from field trials that compare robotic spot spraying against industry-standard broadcast spraying, by measuring the weed control efficacy, the reduction in herbicide usage, and the water quality improvements in irrigation runoff. The average results across 25 hectares of field trials show that spot spraying on sugarcane farms is 97% as effective as broadcast spraying and reduces herbicide usage by 35%, proportionally to the weed density. For specific trial strips with lower weed pressure, spot spraying reduced herbicide usage by up to 65%. Water quality measurements of irrigation-induced runoff, three to six days after spraying, showed reductions in the mean concentration and mean load of herbicides of 39% and 54%, respectively, compared to broadcast spraying. These promising results reveal the capability of spot spraying technology to reduce herbicide usage on sugarcane farms without impacting weed control and potentially providing sustained water quality benefits.