The transition from digital 3D models to physical objects via 3D printing often requires support structures to prevent overhanging features from collapsing during the fabrication process. While current slicing technologies offer advanced support strategies, they focus on post-processing optimizations rather than addressing the underlying need for support-efficient design during the model generation phase. This paper introduces SEG (\textit{\underline{S}upport-\underline{E}ffective \underline{G}eneration}), a novel framework that integrates Direct Preference Optimization with an Offset (ODPO) into the 3D generation pipeline to directly optimize models for minimal support material usage. By incorporating support structure simulation into the training process, SEG encourages the generation of geometries that inherently require fewer supports, thus reducing material waste and production time. We demonstrate SEG's effectiveness through extensive experiments on two benchmark datasets, Thingi10k-Val and GPT-3DP-Val, showing that SEG significantly outperforms baseline models such as TRELLIS, DPO, and DRO in terms of support volume reduction and printability. Qualitative results further reveal that SEG maintains high fidelity to input prompts while minimizing the need for support structures. Our findings highlight the potential of SEG to transform 3D printing by directly optimizing models during the generative process, paving the way for more sustainable and efficient digital fabrication practices.

This article introduces an artistic research project that utilises artist-in-residency and exhibition as methods for exploring the possibilities of robotic 3D printing and ceramics. The interdisciplinary project unites artists and architects to collaborate on a proposed curatorial concept and Do-It-With-Others (DIWO) technological development. Constraints include material, specifically local clay, production technique, namely 3D printing with a robotic arm, and kiln size, as well as an exhibition concept that is further elaborated in the next chapter. The pictorial presents four projects as case studies demonstrating how the creatives integrate these constraints into their processes. This integration leads to the subsequent refinement and customization of the robotic-ceramics interface, aligning with the practitioners' requirements through software development. The project's focus extends beyond artistic outcomes, aiming also to advance the pipeline of 3D robotic printing in clay, employing a digitally controlled material press that has been developed in-house, with its functionality refined through practice.

Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links for these novel robotic manipulators; however, these solutions usually show a reduced performance when bending due to structural deformation. By including an inner support structure this deformation can be minimised, resulting in an increased stiffening performance. This paper presents a new multi-material spine-inspired flexible structure for providing support in stiffness-controllable layer-jamming-based robotic links of large diameter. The proposed spine mechanism is highly movable with type and range of motions that match those of a robotic link using solely layer jamming, whilst maintaining a hollow and light structure. The mechanics and design of the flexible spine are explored, and a prototype of a link utilising it is developed and compared with limb segments based on granular jamming and layer jamming without support structure. Results of experiments verify the advantages of the proposed design, demonstrating that it maintains a constant central diameter across bending angles and presents an improvement of more than 203% of resisting force at 180 degrees.

Robot-assisted 3D printing has drawn a lot of attention by its capability to fabricate curved layers that are optimized according to different objectives. However, the support generation algorithm based on a fixed printing direction for planar layers cannot be directly applied for curved layers as the orientation of material accumulation is dynamically varied. In this paper, we propose a skeleton-based support generation method for robot-assisted 3D printing with curved layers. The support is represented as an implicit solid so that the problems of numerical robustness can be effectively avoided. The effectiveness of our algorithm is verified on a dual-material printing platform that consists of a robotic arm and a newly designed dual-material extruder. Experiments have been successfully conducted on our system to fabricate a variety of freeform models.

We propose a neural network-based approach to topology optimization that aims to reduce the use of support structures in additive manufacturing. Our approach uses a network architecture that allows the simultaneous determination of an optimized: (1) part segmentation, (2) the topology of each part, and (3) the build direction of each part that collectively minimize the amount of support structure. Through training, the network learns a material density and segment classification in the continuous 3D space. Given a problem domain with prescribed load and displacement boundary conditions, the neural network takes as input 3D coordinates of the voxelized domain as training samples and outputs a continuous density field. Since the neural network for topology optimization learns the density distribution field, analytical solutions to the density gradient can be obtained from the input-output relationship of the neural network. We demonstrate our approach on several compliance minimization problems with volume fraction constraints, where support volume minimization is added as an additional criterion to the objective function. We show that simultaneous optimization of part segmentation along with the topology and print angle optimization further reduces the support structure, compared to a combined print angle and topology optimization without segmentation.

NASA's Insight lander got one step closer to extricating a crucial device that has been wedged in Martian soil since February. In the first of several planned maneuvers, NASA's Insight lander carefully moved part of its support structure which was obscuring the agency's view, using the lander's robotic arm. The successful move puts a probe called the'mole' within NASA's view for the first time since it was ordered to stop drilling earlier this year. NASA's Insight Lander carefully moved part of its support structure which was obscuring the agency's view, using the lander's robotic arm. 'We've completed the first step in our plan to save the mole,' said Troy Hudson of a scientist and engineer with the InSight mission at NASA's Jet Propulsion Laboratory in a statement.

We propose a novel coding theoretic framework for mitigating stragglers in distributed learning. We show how carefully replicating data blocks and coding across gradients can provide tolerance to failures and stragglers for Synchronous Gradient Descent. We implement our schemes in python (using MPI) to run on Amazon EC2, and show how we compare against baseline approaches in running time and generalization error.