Dense collections of movable objects are common in everyday spaces-from cabinets in a home to shelves in a warehouse. Safely retracting objects from such collections is difficult for robots, yet people do it frequently, leveraging learned experience in tandem with vision and non-prehensile tactile sensing on the sides and backs of their hands and arms. We investigate the role of contact force sensing for training robots to gently reach into constrained clutter and extract objects. The available sensing modalities are (1) "eye-in-hand" vision, (2) proprioception, (3) non-prehensile triaxial tactile sensing, (4) contact wrenches estimated from joint torques, and (5) a measure of object acquisition obtained by monitoring the vacuum line of a suction cup. We use imitation learning to train policies from a set of demonstrations on randomly generated scenes, then conduct an ablation study of wrench and tactile information. We evaluate each policy's performance across 40 unseen environment configurations. Policies employing any force sensing show fewer excessive force failures, an increased overall success rate, and faster completion times. The best performance is achieved using both tactile and wrench information, producing an 80% improvement above the baseline without force information.

Vision Language Action models have significantly advanced general purpose robotic manipulation by harnessing large scale pretrained vision and language representations. Among existing approaches, a majority of current VLA systems employ parallel two finger grippers as their default end effectors. However, such grippers face inherent limitations in handling certain real world tasks such as wiping glass surfaces or opening drawers without handles due to insufficient contact area or lack of adhesion. To overcome these challenges, we present a low cost, integrated hardware design that combines a mechanical two finger gripper with a vacuum suction unit, enabling dual mode manipulation within a single end effector. Our system supports flexible switching or synergistic use of both modalities, expanding the range of feasible tasks. We validate the efficiency and practicality of our design within two state of the art VLA frameworks: DexVLA and Pi0. Experimental results demonstrate that with the proposed hybrid end effector, robots can successfully perform multiple complex tasks that are infeasible for conventional two finger grippers alone. All hardware designs and controlling systems will be released.

Conventional suction cups lack sensing capabilities for contact-aware manipulation in unstructured environments. This paper presents FlexiCup, a fully wireless multimodal suction cup that integrates dual-zone vision-tactile sensing. The central zone dynamically switches between vision and tactile modalities via illumination control for contact detection, while the peripheral zone provides continuous spatial awareness for approach planning. FlexiCup supports both vacuum and Bernoulli suction modes through modular mechanical configurations, achieving complete wireless autonomy with onboard computation and power. We validate hardware versatility through dual control paradigms. Modular perception-driven grasping across structured surfaces with varying obstacle densities demonstrates comparable performance between vacuum (90.0% mean success) and Bernoulli (86.7% mean success) modes. Diffusion-based end-to-end learning achieves 73.3% success on inclined transport and 66.7% on orange extraction tasks. Ablation studies confirm that multi-head attention coordinating dual-zone observations provides 13% improvements for contact-aware manipulation. Hardware designs and firmware are available at https://anonymous.4open.science/api/repo/FlexiCup-DA7D/file/index.html?v=8f531b44.

Abstract-- Dexterous in-hand manipulation remains a foun-dational challenge in robotics, with progress often constrained by the prevailing paradigm of imitating the human hand. This anthropomorphic approach creates two critical barriers: 1) it limits robotic capabilities to tasks humans can already perform, and 2) it makes data collection for learning-based methods exceedingly difficult. Both challenges are caused by traditional force-closure which requires coordinating complex, multi-point contacts based on friction, normal force, and gravity to grasp an object. This makes teleoperated demonstrations unstable and amplifies the sim-to-real gap for reinforcement learning. In this work, we propose a paradigm shift: moving away from replicating human mechanics toward the design of novel robotic embodiments. We introduce the Suction Leap-Hand (SLeap Hand), a multi-fingered hand featuring integrated fingertip suction cups that realize a new form of suction-enabled dexterity. More importantly, this suction-based embodiment unlocks a new class of dexterous skills that are difficult or even impossible for the human hand, such as one-handed paper cutting and in-hand writing. Our work demonstrates that by moving beyond anthropomorphic constraints, novel embodiments can not only lower the barrier for collecting robust manipulation data but also enable the stable, single-handed completion of tasks that would typically require two human hands. Dexterous manipulation, the ability to reconfigure objects within a single hand, remains a grand challenge in robotics [1], [2]. The dominant paradigm for achieving this goal has been data-driven learning on anthropomorphic hands, an approach that has led to successes in grasping and reorientation [3], [4], [5].

Please find the citation info @ Zenodo, as the proceedings of ICRA are no longer sent to IEEE Xplore. This is a pre-print version of the paper presented at IEEE International Conference on Robotics and Automation 2025 (ICRA), Atlanta, US. Abstract -- In this work, a control scheme for human-robot collaborative object transportation is proposed, considering a quadruped robot equipped with the MIGHTY suction cup that serves both as a gripper for holding the object and a force/torque sensor . The proposed control scheme is based on the notion of admittance control, and incorporates a variable damping term aiming towards increasing the controllability of the human and, at the same time, decreasing her/his effort. Furthermore, to ensure that the object is not detached from the suction cup during the collaboration, an additional control signal is proposed, which is based on a barrier artificial potential. The proposed control scheme is proven to be passive and its performance is demonstrated through experimental evaluations conducted using the Unitree Go1 robot equipped with the MIGHTY suction cup.

Warehouse automation plays a pivotal role in enhancing operational efficiency, minimizing costs, and improving resilience to workforce variability. While prior research has demonstrated the potential of machine learning (ML) models to increase picking success rates in large-scale robotic fleets by prioritizing high-probability picks and packages, these efforts primarily focused on predicting success probabilities for picks sampled using heuristic methods. Limited attention has been given, however, to leveraging data-driven approaches to directly optimize sampled picks for better performance at scale. In this study, we propose an ML-based framework that predicts transform adjustments as well as improving the selection of suction cups for multi-suction end effectors for sampled picks to enhance their success probabilities. The framework was integrated and evaluated in test workcells that resemble the operations of Amazon Robotics' Robot Induction (Robin) fleet, which is used for package manipulation. Evaluated on over 2 million picks, the proposed method achieves a 20\% reduction in pick failure rates compared to a heuristic-based pick sampling baseline, demonstrating its effectiveness in large-scale warehouse automation scenarios.

Warehouse robotic systems equipped with vacuum grippers must reliably grasp a diverse range of objects from densely packed shelves. However, these environments present significant challenges, including occlusions, diverse object orientations, stacked and obstructed items, and surfaces that are difficult to suction. We introduce \tetra, a novel vacuum-based grasping strategy featuring four suction cups mounted on linear actuators. Each actuator is equipped with an optical time-of-flight (ToF) proximity sensor, enabling reactive grasping. We evaluate \tetra in a warehouse-style setting, demonstrating its ability to manipulate objects in stacked and obstructed configurations. Our results show that our RL-based policy improves picking success in stacked-object scenarios by 22.86\% compared to a single-suction gripper. Additionally, we demonstrate that TetraGrip can successfully grasp objects in scenarios where a single-suction gripper fails due to physical limitations, specifically in two cases: (1) picking an object occluded by another object and (2) retrieving an object in a complex scenario. These findings highlight the advantages of multi-actuated, suction-based grasping in unstructured warehouse environments. The project website is available at: \href{https://tetragrip.github.io/}{https://tetragrip.github.io/}.

The ability of robotic grippers to not only grasp but also re-position and re-orient objects in-hand is crucial for achieving versatile, general-purpose manipulation. While recent advances in soft robotic grasping has greatly improved grasp quality and stability, their manipulation capabilities remain under-explored. This paper presents the DexGrip, a multi-modal soft robotic gripper for in-hand grasping, re-orientation and manipulation. DexGrip features a 3 Degrees of Freedom (DoFs) active suction palm and 3 active (rotating) grasping surfaces, enabling soft, stable, and dexterous grasping and manipulation without ever needing to re-grasp an object. Uniquely, these features enable complete 360 degree rotation in all three principal axes. We experimentally demonstrate these capabilities across a diverse set of objects and tasks. DexGrip successfully grasped, re-positioned, and re-oriented objects with widely varying stiffnesses, sizes, weights, and surface textures; and effectively manipulated objects that presented significant challenges for existing robotic grippers.

The development of large language models and vision-language models (VLMs) has resulted in the increasing use of robotic systems in various fields. However, the effective integration of these models into real-world robotic tasks is a key challenge. We developed a versatile robotic system called SuctionPrompt that utilizes prompting techniques of VLMs combined with 3D detections to perform product-picking tasks in diverse and dynamic environments. Our method highlights the importance of integrating 3D spatial information with adaptive action planning to enable robots to approach and manipulate objects in novel environments. In the validation experiments, the system accurately selected suction points 75.4%, and achieved a 65.0% success rate in picking common items. This study highlights the effectiveness of VLMs in robotic manipulation tasks, even with simple 3D processing.

In warehouse environments, robots require robust picking capabilities to manage a wide variety of objects. Effective deployment demands minimal hardware, strong generalization to new products, and resilience in diverse settings. Current methods often rely on depth sensors for structural information, which suffer from high costs, complex setups, and technical limitations. Inspired by recent advancements in computer vision, we propose an innovative approach that leverages foundation models to enhance suction grasping using only RGB images. Trained solely on a synthetic dataset, our method generalizes its grasp prediction capabilities to real-world robots and a diverse range of novel objects not included in the training set. Our network achieves an 82.3\% success rate in real-world applications. The project website with code and data will be available at http://optigrasp.github.io.