In this work, we introduce SpikeATac, a multimodal tactile finger combining a taxelized and highly sensitive dynamic response (PVDF) with a static transduction method (capacitive) for multimodal touch sensing. Named for its `spiky' response, SpikeATac's 16-taxel PVDF film sampled at 4 kHz provides fast, sensitive dynamic signals to the very onset and breaking of contact. We characterize the sensitivity of the different modalities, and show that SpikeATac provides the ability to stop quickly and delicately when grasping fragile, deformable objects. Beyond parallel grasping, we show that SpikeATac can be used in a learning-based framework to achieve new capabilities on a dexterous multifingered robot hand. We use a learning recipe that combines reinforcement learning from human feedback with tactile-based rewards to fine-tune the behavior of a policy to modulate force. Our hardware platform and learning pipeline together enable a difficult dexterous and contact-rich task that has not previously been achieved: in-hand manipulation of fragile objects. Videos are available at \href{https://roamlab.github.io/spikeatac/}{roamlab.github.io/spikeatac}.

Rehabilitation technology is a natural setting to study the shared learning and decision-making of human and machine agents. In this work, we explore the use of Hierarchical Reinforcement Learning (HRL) to develop adaptive control strategies for lower-limb exoskeletons, aiming to enhance mobility and autonomy for individuals with motor impairments. Inspired by prominent models of biological sensorimotor processing, our investigated HRL approach breaks down the complex task of exoskeleton control adaptation into a higher-level framework for terrain strategy adaptation and a lower-level framework for providing predictive information; this latter element is implemented via the continual learning of general value functions (GVFs). GVFs generated temporal abstractions of future signal values from multiple wearable lower-limb sensors, including electromyography, pressure insoles, and goniometers. We investigated two methods for incorporating actual and predicted sensor signals into a policy network with the intent to improve the decision-making capacity of the control system of a lower-limb exoskeleton during ambulation across varied terrains. As a key result, we found that the addition of predictions made from GVFs increased overall network accuracy. Terrain-specific performance increases were seen while walking on even ground, uneven ground, up and down ramps, and turns, terrains that are often misclassified without predictive information. This suggests that predictive information can aid decision-making during uncertainty, e.g., on terrains that have a high chance of being misclassified. This work, therefore, contributes new insights into the nuances of HRL and the future development of exoskeletons to facilitate safe transitioning and traversing across different walking environments.

In both neuroscience and artificial intelligence, popular functional frameworks and neural network formulations operate by making use of extrinsic error measurements and global learning algorithms. Through a set of conjectures based on evolutionary insights on the origin of cellular adaptive mechanisms, we reinterpret the core meaning of sensory signals to allow the brain to be interpreted as a negative feedback control system, and show how this could lead to local learning algorithms without the need for global error correction metrics. Thereby, a sufficiently good minima in sensory activity can be the complete reward signal of the network, as well as being both necessary and sufficient for biological learning to arise. We show that this method of learning was likely already present in the earliest unicellular life forms on earth. We show evidence that the same principle holds and scales to multicellular organisms where it in addition can lead to division of labour between cells. Available evidence shows that the evolution of the nervous system likely was an adaptation to more effectively communicate intercellular signals to support such division of labour. We therefore propose that the same learning principle that evolved already in the earliest unicellular life forms, i.e. negative feedback control of externally and internally generated sensor signals, has simply been scaled up to become a fundament of the learning we see in biological brains today. We illustrate diverse biological settings, from the earliest unicellular organisms to humans, where this operational principle appears to be a plausible interpretation of the meaning of sensor signals in biology, and how this relates to current neuroscientific theories and findings.

Strain sensors are gaining popularity in soft robotics for acquiring tactile data due to their flexibility and ease of integration. Tactile sensing plays a critical role in soft grippers, enabling them to safely interact with unstructured environments and precisely detect object properties. However, a significant challenge with these systems is their high non-linearity, time-varying behavior, and long-term signal drift. In this paper, we introduce a continual learning (CL) approach to model a soft finger equipped with piezoelectric-based strain sensors for proprioception. To tackle the aforementioned challenges, we propose an adaptive CL algorithm that integrates a Long Short-Term Memory (LSTM) network with a memory buffer for rehearsal and includes a regularization term to keep the model's decision boundary close to the base signal while adapting to time-varying drift. We conduct nine different experiments, resetting the entire setup each time to demonstrate signal drift. We also benchmark our algorithm against two other methods and conduct an ablation study to assess the impact of different components on the overall performance.

Complex engineering systems are often subject to multiple failure modes. Developing a remaining useful life (RUL) prediction model that does not consider the failure mode causing degradation is likely to result in inaccurate predictions. However, distinguishing between causes of failure without manually inspecting the system is nontrivial. This challenge is increased when the causes of historically observed failures are unknown. Sensors, which are useful for monitoring the state-of-health of systems, can also be used for distinguishing between multiple failure modes as the presence of multiple failure modes results in discriminatory behavior of the sensor signals. When systems are equipped with multiple sensors, some sensors may exhibit behavior correlated with degradation, while other sensors do not. Furthermore, which sensors exhibit this behavior may differ for each failure mode. In this paper, we present a simultaneous clustering and sensor selection approach for unlabeled training datasets of systems exhibiting multiple failure modes. The cluster assignments and the selected sensors are then utilized in real-time to first diagnose the active failure mode and then to predict the system RUL. We validate the complete pipeline of the methodology using a simulated dataset of systems exhibiting two failure modes and on a turbofan degradation dataset from NASA.

Remaining useful life (RUL) prediction is crucial for maintaining modern industrial systems, where equipment reliability and operational safety are paramount. Traditional methods, based on small-scale deep learning or physical/statistical models, often struggle with complex, multidimensional sensor data and varying operating conditions, limiting their generalization capabilities. To address these challenges, this paper introduces an innovative regression framework utilizing large language models (LLMs) for RUL prediction. By leveraging the modelling power of LLMs pre-trained on corpus data, the proposed model can effectively capture complex temporal dependencies and improve prediction accuracy. Extensive experiments on the Turbofan engine's RUL prediction task show that the proposed model surpasses state-of-the-art (SOTA) methods on the challenging FD002 and FD004 subsets and achieves near-SOTA results on the other subsets. Notably, different from previous researches, our framework uses the same sliding window length and all sensor signals for all subsets, demonstrating strong consistency and generalization. Moreover, transfer learning experiments reveal that with minimal target domain data for fine-tuning, the model outperforms SOTA methods trained on full target domain data. This research highlights the significant potential of LLMs in industrial signal processing and RUL prediction, offering a forward-looking solution for health management in future intelligent industrial systems.

Operating units often experience various failure modes in complex systems, leading to distinct degradation paths. Relying on a prognostic model trained on a single failure mode may lead to poor generalization performance across multiple failure modes. Therefore, accurately identifying the failure mode is of critical importance. Current prognostic approaches either ignore failure modes during degradation or assume known failure mode labels, which can be challenging to acquire in practice. Moreover, the high dimensionality and complex relations of sensor signals make it challenging to identify the failure modes accurately. To address these issues, we propose a novel failure mode diagnosis method that leverages a dimension reduction technique called UMAP (Uniform Manifold Approximation and Projection) to project and visualize each unit's degradation trajectory into a lower dimension. Then, using these degradation trajectories, we develop a time series-based clustering method to identify the training units' failure modes. Finally, we introduce a monotonically constrained prognostic model to predict the failure mode labels and RUL of the test units simultaneously using the obtained failure modes of the training units. The proposed prognostic model provides failure mode-specific RUL predictions while preserving the monotonic property of the RUL predictions across consecutive time steps. We evaluate the proposed model using a case study with the aircraft gas turbine engine dataset.

Achieving human-level dexterity in robotic grasping remains a challenging endeavor. Robotic hands frequently encounter slippage and deformation during object manipulation, issues rarely encountered by humans due to their sensory receptors, experiential learning, and motor memory. The emulation of the human grasping reflex within robotic hands is referred to as the ``bionic reflex". Past endeavors in the realm of bionic reflex control predominantly relied on model-based and supervised learning approaches, necessitating human intervention during thresholding and labeling tasks. In this study, we introduce an innovative bionic reflex control pipeline, leveraging reinforcement learning (RL); thereby eliminating the need for human intervention during control design. Our proposed bionic reflex controller has been designed and tested on an anthropomorphic hand, manipulating deformable objects in the PyBullet physics simulator, incorporating domain randomization (DR) for enhanced Sim2Real transferability. Our findings underscore the promise of RL as a potent tool for advancing bionic reflex control within anthropomorphic robotic hands. We anticipate that this autonomous, RL-based bionic reflex controller will catalyze the development of dependable and highly efficient robotic and prosthetic hands, revolutionizing human-robot interaction and assistive technologies.

This paper presents a novel framework to realize proprioception and closed-loop control for soft manipulators. Deformations with large elongation and large bending can be precisely predicted using geometry-based sensor signals obtained from the inductive springs and the inertial measurement units (IMUs) with the help of machine learning techniques. Multiple geometric signals are fused into robust pose estimations, and a data-efficient training process is achieved after applying the strategy of sim-to-real transfer. As a result, we can achieve proprioception that is robust to the variation of external loading and has an average error of 0.7% across the workspace on a pneumatic-driven soft manipulator. The realized proprioception on soft manipulator is then contributed to building a sensor-space based algorithm for closed-loop control. A gradient descent solver is developed to drive the end-effector to achieve the required poses by iteratively computing a sequence of reference sensor signals. A conventional controller is employed in the inner loop of our algorithm to update actuators (i.e., the pressures in chambers) for approaching a reference signal in the sensor-space. The systematic function of closed-loop control has been demonstrated in tasks like path following and pick-and-place under different external loads.

Machine learning (ML) has been extensively adopted for the online sensing-based monitoring in advanced manufacturing systems. However, the sensor data collected under abnormal states are usually insufficient, leading to significant data imbalanced issue for supervised machine learning. A common solution for this issue is to incorporate data augmentation technique, i.e., augmenting the available abnormal states data (i.e., minority samples) via synthetic generation. To generate the high-quality minority samples effectively, it is vital to learn the underlying distribution of the abnormal states data. In recent years, the generative adversarial network (GAN)-based approaches become popular to learn data distribution as well as perform data augmentation. However, in practice, the quality of generated samples from GAN-based data augmentation may vary drastically. In addition, the sensor signals are collected sequentially by time from the manufacturing systems, which means the consideration of sequential information is also very important in data augmentation. To address these limitations, inspired by the multi-head attention mechanism, this paper proposed an attention-stacked GAN (AS-GAN) architecture for the sensor data augmentation of online monitoring in advanced manufacturing. In this proposed AS-GAN, a new attention-stacked framework is incorporated to strengthen the generator in GAN with the learning capability of considering sequential information. Furthermore, the developed attention-stacked framework also greatly helps to improve the quality of generated sensor signals. The case studies conducted in additive manufacturing also successfully validate the effectiveness of AS-GAN to augment high-quality artificial multi-channel sensor signals for online monitoring of manufacturing systems.