The paper proposes an efficient algebraic solution to the problem of forward kinematics for a general Stewart-Gough platform. The problem involves determining all possible postures of a mobile platform connected to a fixed base by six legs, given the leg lengths and the internal geometries of the platform and base. The problem is known to have 40 solutions (whether real or complex). The proposed algorithm consists of three main steps: (i) a specific sparse matrix of size 293x362 (the elimination template) is constructed from the coefficients of the polynomial system describing the platform's kinematics; (ii) the PLU decomposition of this matrix is used to construct a pair of 69x69 matrices; (iii) all 40 solutions (including complex ones) are obtained by computing the generalized eigenvectors of this matrix pair. The proposed algorithm is numerically robust, computationally efficient, and straightforward to implement - requiring only standard linear algebra decompositions. MATLAB, Julia, and Python implementations of the algorithm will be made publicly available.

Nowadays, being fast and precise are key requirements in Robotics. This work introduces a novel methodology to tune the stiffness of Cable-Driven Parallel Robots (CDPRs) while simultaneously addressing the tension distribution problem. In particular, the approach relies on the Analytic-Centre method. Indeed, weighting the barrier functions makes natural the stiffness adaptation. The intrinsic ability to adjust the stiffness during the execution of the task enables the CDPRs to effectively meet above-mentioned requirements. The capabilities of the method are demonstrated through simulations by comparing it with the existing approach.

Aerial Manipulators (AMs) provide a versatile platform for various applications, including 3D printing, architecture, and aerial grasping missions. However, their operational speed is often sacrificed to uphold precision. Existing control strategies for AMs often regard the manipulator as a disturbance and employ robust control methods to mitigate its influence. This research focuses on elevating the precision of the end-effector and enhancing the agility of aerial manipulator movements. We present a composite control scheme to address these challenges. Initially, a Nonlinear Disturbance Observer (NDOB) is utilized to compensate for internal coupling effects and external disturbances. Subsequently, manipulator dynamics are processed through a high pass filter to facilitate agile movements. By integrating the proposed control method into a fully autonomous delta-arm-based AM system, we substantiate the controller's efficacy through extensive real-world experiments. The outcomes illustrate that the end-effector can achieve accuracy at the millimeter level.

Parallel kinematic manipulators (PKM) are characterized by closed kinematic loops, due to the parallel arrangement of limbs but also due to the existence of kinematic loops within the limbs. Moreover, many PKM are built with limbs constructed by serially combining kinematic loops. Such limbs are called hybrid, which form a particular class of complex limbs. Design and model-based control requires accurate dynamic PKM models desirably without model simplifications. Dynamics modeling then necessitates kinematic relations of all members of the PKM, in contrast to the standard kinematics modeling of PKM, where only the forward and inverse kinematics solution for the manipulator (relating input and output motions) are computed. This becomes more involved for PKM with hybrid limbs. In this paper a modular modeling approach is employed, where limbs are treated separately, and the individual dynamic equations of motions (EOM) are subsequently assembled to the overall model. Key to the kinematic modeling is the constraint resolution for the individual loops within the limbs. This local constraint resolution is a special case of the general \emph{constraint embedding} technique. The proposed method finally allows for a systematic modeling of general PKM. The method is demonstrated for the IRSBot-2, where each limb comprises two independent loops.

Mobility, which is a basic property for a mechanism has to be analyzed to find the degrees of freedom. A quick method for calculation of degrees of freedom in a mechanism is proposed in this work. The mechanism is represented in a way that resembles a zebra crossing. An algorithm is proposed which is used to determine the mobility from the zebra crossing diagram. This algorithm takes into account the number of patches between the black patches, the number of joints attached to the fixed link and the number of loops in the mechanism. A number of cases have been discussed which fail to give the desired results using the widely used classical Kutzbach-Grubler formula.

This study investigates the stiffness characteristics of the Sprint Z3 head, also known as 3-PRS Parallel Kinematics Machines, which are among the most extensively researched and viably successful manipulators for precision machining applications. Despite the wealth of research on these robotic manipulators, no previous work has demonstrated their stiffness performance within the parasitic motion space. Such an undesired motion influences their stiffness properties, as stiffness is configuration-dependent. Addressing this gap, this paper develops a stiffness model that accounts for both the velocity-level parasitic motion space and the regular workspace. Numerical simulations are provided to illustrate the stiffness characteristics of the manipulator across all considered spaces. The results indicate that the stiffness profile within the parasitic motion space is both shallower and the values are smaller when compared to the stiffness distribution across the orientation workspace. This implies that evaluating a manipulator's performance adequately requires assessing its ability to resist external loads during parasitic motion. Therefore, comprehending this aspect is crucial for redesigning components to enhance overall stiffness.

This paper aims to study a specific kind of parallel robot: Spherical Parallel Manipulators (SPM) that are capable of unlimited rolling. A focus is made on the kinematics of such mechanisms, especially taking into account uncertainties (e.g. on conception & fabrication parameters, measures) and their propagations. Such considerations are crucial if we want to control our robot correctly without any undesirable behavior in its workspace (e.g. effects of singularities). In this paper, we will consider two different approaches to study the kinematics and the singularities of the robot of interest: symbolic and semi-numerical. By doing so, we can compute a singularity-free zone in the work- and joint spaces, considering given uncertainties on the parameters. In this zone, we can use any control law to inertially stabilize the upper platform of the robot.

This study presents a comparison between the Sprint Z3 and A3 head parallel kinematics machines, distinguished by their joint sequence. The analysis focuses on performance attributes critical for precision machining specifically, parasitic motion, workspace capability, stiffness performance over the independent and parasitic spaces, and condition number distribution. Although these machines are extensively utilized in precision machining for the aerospace and automotive industries, a definitive superior choice has not been identified for machining large components. Moreover, the distribution of stiffness across the configuration of parasitic space has not previously been addressed for either mechanism. This research reveals that despite identical parameters used and exhibiting similar parasitic motions, the Sprint Z3 demonstrates superior stiffness, workspace volume, and condition number distribution. This performance advantage is attributed to variations in joint and link sequence, which enhance deflection resilience, crucial for manufacturing large-scale components. This also results in a higher condition number and a larger workspace. The result highlights the importance of design architecture in the efficacy of parallel kinematics machines and suggest

This study presents a systematic enumeration of spherical ($SO(3)$) type parallel robots' variants using an analytical velocity-level approach. These robots are known for their ability to perform arbitrary rotations around a fixed point, making them suitable for numerous applications. Despite their architectural diversity, existing research has predominantly approached them on a case-by-case basis. This approach hinders the exploration of all possible variants, thereby limiting the benefits derived from architectural diversity. By employing a generalized analytical approach through the reciprocal screw method, we systematically explore all the kinematic conditions for limbs yielding $SO(3)$ motion.Consequently, all 73 possible types of non-redundant limbs suitable for generating the target $SO(3)$ motion are identified. The approach involves performing an in-depth algebraic motion-constraint analysis and identifying common characteristics among different variants. This leads us to systematically explore all 73 symmetric and 5256 asymmetric variants, which in turn become a total of 5329, each potentially having different workspace capability, stiffness performance, and dynamics. Hence, having all these variants can facilitate the innovation of novel spherical robots and help us easily find the best and optimal ones for our specific applications.

Although parallel manipulators (PMs) started with the introduction of architectures with 6 Degrees of Freedom (DoF), a vast number of applications require less than 6 DoF. Consequently, scholars have proposed architectures with 3 DoF and 4 DoF, but relatively few 4 DoF PMs have become prototypes, especially of the two rotation (2R) and two translation (2T) motion types. In this paper, we explain the mechatronics design, prototype and control architecture design of a 4 DoF PM with 2R2T motions. We chose to design a 4 DoF manipulator based on the motion needed to complete the tasks of lower limb rehabilitation. To the author's best knowledge, PMs between 3 and 6 DoF for rehabilitation of lower limbs have not been proposed to date. The developed architecture enhances the three minimum DoF required by adding a 4 DoF which allows combinations of normal or tangential efforts in the joints, or torque acting on the knee. We put forward the inverse and forward displacement equations, describe the prototype, perform the experimental setup, and develop the hardware and control architecture. The tracking accuracy experiments from the proposed controller show that the manipulator can accomplish the required application.