Spacecraft pose estimation is crucial for autonomous in-space operations, such as rendezvous, docking and on-orbit servicing. Vision-based pose estimation methods, which typically employ RGB imaging sensors, is a compelling solution for spacecraft pose estimation, but are challenged by harsh lighting conditions, which produce imaging artifacts such as glare, over-exposure, blooming and lens flare. Due to their much higher dynamic range, neuromorphic or event sensors are more resilient to extreme lighting conditions. However, event sensors generally have lower spatial resolution and suffer from reduced signal-to-noise ratio during periods of low relative motion. A beam-splitter prism was employed to achieve precise optical and temporal alignment. Then, a RANSAC-based technique was developed to fuse the information from the RGB and event channels to achieve pose estimation that leveraged the strengths of the two modalities. The pipeline was complemented by dropout uncertainty estimation to detect extreme conditions that affect either channel. To benchmark the performance of the proposed event-RGB fusion method, we collected a comprehensive real dataset of RGB and event data for satellite pose estimation in a laboratory setting under a variety of challenging illumination conditions. Encouraging results on the dataset demonstrate the efficacy of our event-RGB fusion approach and further supports the usage of event sensors for spacecraft pose estimation. To support community research on this topic, our dataset has been released publicly. Keywords: event-based pose estimation, rendezvous, domain gap, sensor fusion, close proximity, harsh lighting1. Introduction Spacecraft pose estimation is the problem of determining the 6-degrees-of-freedom (6DoF) pose consisting of the position and orientation of a space-borne object, typically a satellite. It is a critical step in a wide range of space applications, including rendezvous, close proximity operations, debris removal, refueling and on-orbit servicing [1, 2, 3, 4]. Robust pose estimation is paramount to safely and effectively executing these tasks [5, 6]. Several types of sensor technologies can be employed for spacecraft pose estimation, but they are all subject to size-weight-power and cost (SWaP-C) constraints. Optical sensors such as RGB imaging sensors are favored due to their low SWaP-C requirements, high resolution and the availability of established vision-based algorithms. However, operating in the space environment can present nontrivial challenges to vision-based systems.

Event-based localization research and datasets are a rapidly growing area of interest, with a tenfold increase in the cumulative total number of published papers on this topic over the past 10 years. Whilst the rapid expansion in the field is exciting, it brings with it an associated challenge: a growth in the variety of required code and package dependencies as well as data formats, making comparisons difficult and cumbersome for researchers to implement reliably. To address this challenge, we present Event-LAB: a new and unified framework for running several event-based localization methodologies across multiple datasets. Event-LAB is implemented using the Pixi package and dependency manager, that enables a single command-line installation and invocation for combinations of localization methods and datasets. To demonstrate the capabilities of the framework, we implement two common event-based localization pipelines: Visual Place Recognition (VPR) and Simultaneous Localization and Mapping (SLAM). We demonstrate the ability of the framework to systematically visualize and analyze the results of multiple methods and datasets, revealing key insights such as the association of parameters that control event collection counts and window sizes for frame generation to large variations in performance. The results and analysis demonstrate the importance of fairly comparing methodologies with consistent event image generation parameters. Our Event-LAB framework provides this ability for the research community, by contributing a streamlined workflow for easily setting up multiple conditions.

Event cameras offer microsecond latency, high dynamic range, and low power consumption, making them ideal for real-time robotic perception under challenging conditions such as motion blur, occlusion, and illumination changes. However, despite their advantages, synthetic event-based vision remains largely unexplored in mainstream robotics simulators. This lack of simulation setup hinders the evaluation of event-driven approaches for robotic manipulation and navigation tasks. This work presents an open-source, user-friendly v2e robotics operating system (ROS) package for Gazebo simulation that enables seamless event stream generation from RGB camera feeds. The package is used to investigate event-based robotic policies ( ERP) for real-time navigation and manipulation. Two representative scenarios are evaluated: ( 1) object following with a mobile robot and ( 2) object detection and grasping with a robotic manipulator. Transformer-based ERP s are trained by behavior cloning and compared to RGB-based counterparts under various operating conditions. Experimental results show that event-guided policies consistently deliver competitive advantages. The results highlight the potential of event-driven perception to improve real-time robotic navigation and manipulation, providing a foundation for broader integration of event cameras into robotic policy learning.

Existing tracking algorithms typically rely on low-frame-rate RGB cameras coupled with computationally intensive deep neural network architectures to achieve effective tracking. However, such frame-based methods inherently face challenges in achieving low-latency performance and often fail in resource-constrained environments. Visual object tracking using bio-inspired event cameras has emerged as a promising research direction in recent years, offering distinct advantages for low-latency applications. In this paper, we propose a novel Slow-Fast Tracking paradigm that flexibly adapts to different operational requirements, termed SFTrack. The proposed framework supports two complementary modes, i.e., a high-precision slow tracker for scenarios with sufficient computational resources, and an efficient fast tracker tailored for latency-aware, resource-constrained environments. Specifically, our framework first performs graph-based representation learning from high-temporal-resolution event streams, and then integrates the learned graph-structured information into two FlashAttention-based vision backbones, yielding the slow and fast trackers, respectively. The fast tracker achieves low latency through a lightweight network design and by producing multiple bounding box outputs in a single forward pass. Finally, we seamlessly combine both trackers via supervised fine-tuning and further enhance the fast tracker's performance through a knowledge distillation strategy. Extensive experiments on public benchmarks, including FE240, COESOT, and EventVOT, demonstrate the effectiveness and efficiency of our proposed method across different real-world scenarios. The source code has been released on https://github.com/Event-AHU/SlowFast_Event_Track.

Event-based cameras are bio-inspired sensors that detect light changes asynchronously for each pixel. They are increasingly used in fields like computer vision and robotics because of several advantages over traditional frame-based cameras, such as high temporal resolution, low latency, and high dynamic range. As with any camera, the output's quality depends on how well the camera's settings, called biases for event-based cameras, are configured. While frame-based cameras have advanced automatic configuration algorithms, there are very few such tools for tuning these biases. A systematic testing framework would require observing the same scene with different biases, which is tricky since event cameras only generate events when there is movement. Event simulators exist, but since biases heavily depend on the electrical circuit and the pixel design, available simulators are not well suited for bias tuning. To allow reproducibility, we present BiasBench, a novel event dataset containing multiple scenes with settings sampled in a grid-like pattern. We present three different scenes, each with a quality metric of the downstream application. Additionally, we present a novel, RL-based method to facilitate online bias adjustments.

Precise action spotting has attracted considerable attention due to its promising applications. While existing methods achieve substantial performance by employing well-designed model architecture, they overlook a significant challenge: the temporal misalignment inherent in ground-truth labels. This misalignment arises when frames labeled as containing events do not align accurately with the actual event times, often as a result of human annotation errors or the inherent difficulties in precisely identifying event boundaries across neighboring frames. T o tackle this issue, we propose a novel dynamic label assignment strategy that allows predictions to have temporal offsets from ground-truth action times during training, ensuring consistent event spotting. Our method extends the concept of minimum-cost matching, which is utilized in the spatial domain for object detection, to the temporal domain. By calculating matching costs based on predicted action class scores and temporal offsets, our method dynamically assigns labels to the most likely predictions, even when the predicted times of these predictions deviate from ground-truth times, alleviating the negative effects of temporal misalignment in labels. W e conduct extensive experiments and demonstrate that our method achieves state-of-the-art performance, particularly in conditions where events are visually distinct and temporal misalignment in labels is common.

EVLoc: Event-based Visual Localization in LiDAR Maps via Event-Depth Registration Kuangyi Chen Jun Zhang Friedrich Fraundorfer Abstract -- Event cameras are bio-inspired sensors with some notable features, including high dynamic range and low latency, which makes them exceptionally suitable for perception in challenging scenarios such as high-speed motion and extreme lighting conditions. In this paper, we explore their potential for localization within pre-existing LiDAR maps, a critical task for applications that require precise navigation and mobile manipulation. Our framework follows a paradigm based on the refinement of an initial pose. Specifically, we first project LiDAR points into 2D space based on a rough initial pose to obtain depth maps, and then employ an optical flow estimation network to align events with LiDAR points in 2D space, followed by camera pose estimation using a PnP solver . T o enhance geometric consistency between these two inherently different modalities, we develop a novel frame-based event representation that improves structural clarity. Additionally, given the varying degrees of bias observed in the ground truth poses, we design a module that predicts an auxiliary variable as a regularization term to mitigate the impact of this bias on network convergence. Experimental results on several public datasets demonstrate the effectiveness of our proposed method. T o facilitate future research, both the code and the pre-trained models are made available online 1 . I. I NTRODUCTION Accurate localization techniques are essential for autonomous robots, such as self-driving vehicles and drones.

These sensors and processing has led to an unprecedented increase in spacecraft methods are already attracting growing interest launches and large-scale constellation projects. As a in the space community [7] with the first SNN on result, the orbits around our planet are becoming congested board in space [8] and studies on EBC behaviour under and the risk of collisions is increasing due to radiation [9]. With this paper, we propose the first the presence of fast-moving space debris [1]. Recognizing fully event-based approach for spacecraft pose estimation, the potential dangers, the Inter-Agency Space Debris but also a novel method to account for the event Coordination Committee (IADC) has established stream. Section 2 introduces the event-based camera, guidelines for the containment of space debris and spiking neural network and pose estimation for space the safe disposal of satellites at the end of their operational application. In Section 3 we present the dataset and life. Agencies and companies have planned the network used, and finally in Section 4 we discuss missions such as On-Orbit Servicing (OOS) or Active the results and future works. Debris Removal (ADR) [2][3][4] to extend the life of satellites and address the problem of space debris.

Neuromorphic cameras, also known as event cameras, are asynchronous brightness-change sensors that can capture extremely fast motion without suffering from motion blur, making them particularly promising for 3D reconstruction in extreme environments. However, existing research on 3D reconstruction using monocular neuromorphic cameras is limited, and most of the methods rely on estimating physical priors and employ complex multi-step pipelines. In this work, we propose an end-to-end method for dense voxel 3D reconstruction using neuromorphic cameras that eliminates the need to estimate physical priors. Our method incorporates a novel event representation to enhance edge features, enabling the proposed feature-enhancement model to learn more effectively. Additionally, we introduced Optimal Binarization Threshold Selection Principle as a guideline for future related work, using the optimal reconstruction results achieved with threshold optimization as the benchmark. Our method achieves a 54.6% improvement in reconstruction accuracy compared to the baseline method.

We introduce a wearable driving status recognition device and our open-source dataset, along with a new real-time method robust to changes in lighting conditions for identifying driving status from eye observations of drivers. The core of our method is generating event frames from conventional intensity frames, and the other is a newly designed Attention Driving State Network (ADSN). Compared to event cameras, conventional cameras offer complete information and lower hardware costs, enabling captured frames to encode rich spatial information. However, these textures lack temporal information, posing challenges in effectively identifying driving status. DriveGazen addresses this issue from three perspectives. First, we utilize video frames to generate realistic synthetic dynamic vision sensor (DVS) events. Second, we adopt a spiking neural network to decode pertinent temporal information. Lastly, ADSN extracts crucial spatial cues from corresponding intensity frames and conveys spatial attention to convolutional spiking layers during both training and inference through a novel guide attention module to guide the feature learning and feature enhancement of the event frame. We specifically collected the Driving Status (DriveGaze) dataset to demonstrate the effectiveness of our approach. Additionally, we validate the superiority of the DriveGazen on the Single-eye Event-based Emotion (SEE) dataset. To the best of our knowledge, our method is the first to utilize guide attention spiking neural networks and eye-based event frames generated from conventional cameras for driving status recognition. Please refer to our project page for more details: https://github.com/TooyoungALEX/AAAI25-DriveGazen.