Imitation learning is one of the methods for reproducing human demonstration adaptively in robots. So far, it has been found that generalization ability of the imitation learning enables the robots to perform tasks adaptably in untrained environments. However, motion styles such as motion trajectory and the amount of force applied depend largely on the dataset of human demonstration, and settle down to an average motion style. In this study, we propose a method that adds parametric bias to the conventional imitation learning network and can add constraints to the motion style. By experiments using PR2 and the musculoskeletal humanoid MusashiLarm, we show that it is possible to perform tasks by changing its motion style as intended with constraints on joint velocity, muscle length velocity, and muscle tension.

The estimation and management of motor temperature are important for the continuous movements of robots. In this study, we propose an online learning method of thermal model parameters of motors for an accurate estimation of motor core temperature. Also, we propose a management method of motor core temperature using the updated model and anomaly detection method of motors. Finally, we apply this method to the muscles of the musculoskeletal humanoid and verify the ability of continuous movements.

The flexible musculoskeletal hand is difficult to modelize, and its model can change constantly due to deterioration over time, irreproducibility of initialization, etc. Also, for object recognition, contact detection, and contact control using the hand, it is desirable not to use a neural network trained for each task, but to use only one integrated network. Therefore, we develop a method to acquire a sensor state equation of the musculoskeletal hand using a recurrent neural network with parametric bias. By using this network, the hand can realize recognition of the grasped object, contact simulation, detection, and control, and can cope with deterioration over time, irreproducibility of initialization, etc. by updating parametric bias. We apply this study to the hand of the musculoskeletal humanoid Musashi and show its effectiveness.

Various robotic tool manipulation methods have been developed so far. However, to our knowledge, none of them have taken into account the fact that the grasping state such as grasping position and tool angle can change at any time during the tool manipulation. In addition, there are few studies that can handle deformable tools. In this study, we develop a method for estimating the position of a tool-tip, controlling the tool-tip, and handling online adaptation to changes in the relationship between the body and the tool, using a neural network including parametric bias. We demonstrate the effectiveness of our method for online change in grasping state and for deformable tools, in experiments using two different types of robots: axis-driven robot PR2 and tendon-driven robot MusashiLarm.

The flexible under-actuated musculoskeletal hand is superior in its adaptability and impact resistance. On the other hand, since the relationship between sensors and actuators cannot be uniquely determined, almost all its controls are based on feedforward controls. When grasping and using a tool, the contact state of the hand gradually changes due to the inertia of the tool or impact of action, and the initial contact state is hardly kept. In this study, we propose a system that trains the predictive network of sensor state transition using the actual robot sensor information, and keeps the initial contact state by a feedback control using the network. We conduct experiments of hammer hitting, vacuuming, and brooming, and verify the effectiveness of this study.

This paper summarizes an autonomous driving project by musculoskeletal humanoids. The musculoskeletal humanoid, which mimics the human body in detail, has redundant sensors and a flexible body structure. These characteristics are suitable for motions with complex environmental contact, and the robot is expected to sit down on the car seat, step on the acceleration and brake pedals, and operate the steering wheel by both arms. We reconsider the developed hardware and software of the musculoskeletal humanoid Musashi in the context of autonomous driving. The respective components of autonomous driving are conducted using the benefits of the hardware and software. Finally, Musashi succeeded in the pedal and steering wheel operations with recognition.

The musculoskeletal humanoid is difficult to modelize due to the flexibility and redundancy of its body, whose state can change over time, and so balance control of its legs is challenging. There are some cases where ordinary PID controls may cause instability. In this study, to solve these problems, we propose a method of learning a correlation model among the joint angle, muscle tension, and muscle length of the ankle and the zero moment point to perform balance control. In addition, information on the changing body state is embedded in the model using parametric bias, and the model estimates and adapts to the current body state by learning this information online. This makes it possible to adapt to changes in upper body posture that are not directly taken into account in the model, since it is difficult to learn the complete dynamics of the whole body considering the amount of data and computation. The model can also adapt to changes in body state, such as the change in footwear and change in the joint origin due to recalibration. The effectiveness of this method is verified by a simulation and by using an actual musculoskeletal humanoid, Musashi.

In this study, we investigate object grasping by visual servoing in a low-rigidity robot. It is difficult for a low-rigidity robot to handle its own body as intended compared to a rigid robot, and calibration between vision and body takes some time. In addition, the robot must constantly adapt to changes in its body, such as the change in camera position and change in joints due to aging. Therefore, we develop a method for a low-rigidity robot to autonomously learn visual servoing of its body. We also develop a mechanism that can adaptively change its visual servoing according to temporal body changes. We apply our method to a low-rigidity 6-axis arm, MyCobot, and confirm its effectiveness by conducting object grasping experiments based on visual servoing.

While the musculoskeletal humanoid has various biomimetic benefits, its complex modeling is difficult, and many learning control methods have been developed. However, for the actual robot, the hysteresis of its joint angle tracking is still an obstacle, and realizing target posture quickly and accurately has been difficult. Therefore, we develop a feedback control method considering the hysteresis. To solve the problem in feedback controls caused by the closed-link structure of the musculoskeletal body, we update a neural network representing the relationship between the error of joint angles and the change in target muscle lengths online, and realize target joint angles accurately in a few trials. We compare the performance of several configurations with various network structures and loss definitions, and verify the effectiveness of this study on an actual musculoskeletal humanoid, Musashi.

Various robots have been developed so far; however, we face challenges in modeling the low-rigidity bodies of some robots. In particular, the deflection of the body changes during tool-use due to object grasping, resulting in significant shifts in the tool-tip position and the body's center of gravity. Moreover, this deflection varies depending on the weight and length of the tool, making these models exceptionally complex. However, there is currently no control or learning method that takes all of these effects into account. In this study, we propose a method for constructing a neural network that describes the mutual relationship among joint angle, visual information, and tactile information from the feet. We aim to train this network using the actual robot data and utilize it for tool-tip control. Additionally, we employ Parametric Bias to capture changes in this mutual relationship caused by variations in the weight and length of tools, enabling us to understand the characteristics of the grasped tool from the current sensor information. We apply this approach to the whole-body tool-use on KXR, a low-rigidity plastic-made humanoid robot, to validate its effectiveness.