With the increasing operating frequencies and clock speeds in processors, interconnects affect both the reliability and performance of entire electronic systems. Fault detection and diagnosis of the interconnects are crucial for prognostics and health management (PHM) of electronics. However, traditional approaches using electrical signals as prognostic factors often face challenges in distinguishing defect root causes, necessitating additional destructive evaluations, and are prone to noise interference, leading to potential false alarms. To address these limitations, this paper introduces a novel approach for non-destructive detection and diagnosis of defects in Cu interconnects, offering early detection, enhanced diagnostic accuracy, and noise resilience. Our approach uniquely analyzes both the root cause and severity of interconnect defects by leveraging graph patterns of reflection coefficient, a technique distinct from traditional time series signal analysis. We experimentally demonstrate that the graph patterns possess the capability for fault diagnosis and serve as effective input data for learning algorithms. Additionally, we introduce a novel severity rating ensemble learning (SREL) approach, which significantly enhances diagnostic accuracy and noise robustness. Experimental results demonstrate that the proposed method outperforms conventional machine learning methods and multi-class convolutional neural networks (CNN), achieving a maximum accuracy of 99.3%, especially under elevated noise levels.

This paper presents a comprehensive investigation into developing a fault detection and classification system for real-world IIoT applications. The study addresses challenges in data collection, annotation, algorithm development, and deployment. Using a real-world IIoT system, three phases of data collection simulate 11 predefined fault categories. We propose SMTCNN for fault detection and category classification in IIoT, evaluating its performance on real-world data. SMTCNN achieves superior specificity (3.5%) and shows significant improvements in precision, recall, and F1 measures compared to existing techniques.

Although Alzheimer's disease (AD) cannot be reversed or cured, timely diagnosis can significantly reduce the burden of treatment and care. Current research on AD diagnosis models usually regards the diagnosis task as a typical classification task with two primary assumptions: 1) All target categories are known a priori; 2) The diagnostic strategy for each patient is consistent, that is, the number and type of model input data for each patient are the same. However, real-world clinical settings are open, with complexity and uncertainty in terms of both subjects and the resources of the medical institutions. This means that diagnostic models may encounter unseen disease categories and need to dynamically develop diagnostic strategies based on the subject's specific circumstances and available medical resources. Thus, the AD diagnosis task is tangled and coupled with the diagnosis strategy formulation. To promote the application of diagnostic systems in real-world clinical settings, we propose OpenClinicalAI for direct AD diagnosis in complex and uncertain clinical settings. This is the first powerful end-to-end model to dynamically formulate diagnostic strategies and provide diagnostic results based on the subject's conditions and available medical resources. OpenClinicalAI combines reciprocally coupled deep multiaction reinforcement learning (DMARL) for diagnostic strategy formulation and multicenter meta-learning (MCML) for open-set recognition. The experimental results show that OpenClinicalAI achieves better performance and fewer clinical examinations than the state-of-the-art model. Our method provides an opportunity to embed the AD diagnostic system into the current health care system to cooperate with clinicians to improve current health care.

Fault diagnosis of rolling bearings is of great significance for post-maintenance in rotating machinery, but it is a challenging work to diagnose faults efficiently with a few samples. Additionally, faults commonly occur with randomness and fuzziness due to the complexity of the external environment and the structure of rolling bearings, hindering effective mining of fault characteristics and eventually restricting accuracy of fault diagnosis. To overcome these problems, stochastic configuration network (SCN) based cloud ensemble learning, called SCN-CEL, is developed in this work. Concretely, a cloud feature extraction method is first developed by using a backward cloud generator of normal cloud model to mine the uncertainty of fault information. Then, a cloud sampling method, which generates enough cloud droplets using bidirectional cloud generator, is proposed to extend the cloud feature samples. Finally, an ensemble model with SCNs is developed to comprehensively characterize the uncertainty of fault information and advance the generalization performance of fault diagnosis machine. Experimental results demonstrate that the proposed method indeed performs favorably for distinguishing fault categories of rolling bearings in the few shot scenarios.

Current progress in the artificial intelligence domain has led to the development of various types of AI-powered dementia assessments, which can be employed to identify patients at the early stage of dementia. It can revolutionize the dementia care settings. It is essential that the medical community be aware of various AI assessments and choose them considering their degrees of validity, efficiency, practicality, reliability, and accuracy concerning the early identification of patients with dementia (PwD). On the other hand, AI developers should be informed about various non-AI assessments as well as recently developed AI assessments. Thus, this paper, which can be readable by both clinicians and AI engineers, fills the gap in the literature in explaining the existing solutions for the recognition of dementia to clinicians, as well as the techniques used and the most widespread dementia datasets to AI engineers. It follows a review of papers on AI and non-AI assessments for dementia to provide valuable information about various dementia assessments for both the AI and medical communities.

Fault diagnosis is essential in industrial processes for monitoring the conditions of important machines. With the ever-increasing complexity of working conditions and demand for safety during production and operation, different diagnosis methods are required, and more importantly, an integrated fault diagnosis system that can cope with multiple tasks is highly desired. However, the diagnosis subtasks are often studied separately, and the currently available methods still need improvement for such a generalized system. To address this issue, we propose the Generalized Out-of-distribution Fault Diagnosis (GOOFD) framework to integrate diagnosis subtasks, such as fault detection, fault classification, and novel fault diagnosis. Additionally, a unified fault diagnosis method based on internal contrastive learning is put forward to underpin the proposed generalized framework. The method extracts features utilizing the internal contrastive learning technique and then recognizes the outliers based on the Mahalanobis distance. Experiments are conducted on a simulated benchmark dataset as well as two practical process datasets to evaluate the proposed framework. As demonstrated in the experiments, the proposed method achieves better performance compared with several existing techniques and thus verifies the effectiveness of the proposed framework.

The reliable operation of automatic systems is heavily dependent on the ability to detect faults in the underlying dynamical system. While traditional model-based methods have been widely used for fault detection, data-driven approaches have garnered increasing attention due to their ease of deployment and minimal need for expert knowledge. In this paper, we present a novel principal component analysis (PCA) method that uses occupation kernels. Occupation kernels result in feature maps that are tailored to the measured data, have inherent noise-robustness due to the use of integration, and can utilize irregularly sampled system trajectories of variable lengths for PCA. The occupation kernel PCA method is used to develop a reconstruction error approach to fault detection and its efficacy is validated using numerical simulations.

In the modern world, we are permanently using, leveraging, interacting with, and relying upon systems of ever higher sophistication, ranging from our cars, recommender systems in e-commerce, and networks when we go online, to integrated circuits when using our PCs and smartphones, the power grid to ensure our energy supply, security-critical software when accessing our bank accounts, and spreadsheets for financial planning and decision making. The complexity of these systems coupled with our high dependency on them implies both a non-negligible likelihood of system failures, and a high potential that such failures have significant negative effects on our everyday life. For that reason, it is a vital requirement to keep the harm of emerging failures to a minimum, which means minimizing the system downtime as well as the cost of system repair. This is where model-based diagnosis comes into play. Model-based diagnosis is a principled, domain-independent approach that can be generally applied to troubleshoot systems of a wide variety of types, including all the ones mentioned above, and many more. It exploits and orchestrates i.a. techniques for knowledge representation, automated reasoning, heuristic problem solving, intelligent search, optimization, stochastics, statistics, decision making under uncertainty, machine learning, as well as calculus, combinatorics and set theory to detect, localize, and fix faults in abnormally behaving systems. In this thesis, we will give an introduction to the topic of model-based diagnosis, point out the major challenges in the field, and discuss a selection of approaches from our research addressing these issues.

Fox News medical contributor Dr. Janette Nesheiwat joins'Fox News Live' to discuss the results of an Alzheimer's drug trial by Eli Lilly. Alzheimer's is a disease that heavily impacts memory function, typically in older people. Since memory loss commonly comes with aging, it can be hard to detect if a symptom is just one that comes with old age, or a sign of Alzheimer's disease. The main symptom of Alzheimer's disease is memory loss. More than that, it's memory loss that happens frequently and gets worse over time.

Convolutional Neural Networks (CNNs) are widely used in fault diagnosis of mechanical systems due to their powerful feature extraction and classification capabilities. However, the CNN is a typical black-box model, and the mechanism of CNN's decision-making are not clear, which limits its application in high-reliability-required fault diagnosis scenarios. To tackle this issue, we propose a novel interpretable neural network termed as Time-Frequency Network (TFN), where the physically meaningful time-frequency transform (TFT) method is embedded into the traditional convolutional layer as an adaptive preprocessing layer. This preprocessing layer named as time-frequency convolutional (TFconv) layer, is constrained by a well-designed kernel function to extract fault-related time-frequency information. It not only improves the diagnostic performance but also reveals the logical foundation of the CNN prediction in the frequency domain. Different TFT methods correspond to different kernel functions of the TFconv layer. In this study, four typical TFT methods are considered to formulate the TFNs and their effectiveness and interpretability are proved through three mechanical fault diagnosis experiments. Experimental results also show that the proposed TFconv layer can be easily generalized to other CNNs with different depths. The code of TFN is available on https://github.com/ChenQian0618/TFN.