To ensure safety in teleoperated driving scenarios, communication between vehicles and remote drivers must satisfy strict latency and reliability requirements. In this context, Predictive Quality of Service (PQoS) was investigated as a tool to predict unanticipated degradation of the Quality of Service (QoS), and allow the network to react accordingly. In this work, we design a reinforcement learning (RL) agent to implement PQoS in vehicular networks. To do so, based on data gathered at the Radio Access Network (RAN) and/or the end vehicles, as well as QoS predictions, our framework is able to identify the optimal level of compression to send automotive data under low latency and reliability constraints. We consider different learning schemes, including centralized, fully-distributed, and federated learning. We demonstrate via ns-3 simulations that, while centralized learning generally outperforms any other solution, decentralized learning, and especially federated learning, offers a good trade-off between convergence time and reliability, with positive implications in terms of privacy and complexity.

In Wireless Local Area Networks (WLANs), Access point (AP) transmit power influences (i) received signal quality for users and thus user throughput, (ii) user association and thus load across APs and (iii) AP coverage ranges and thus interference in the network. Despite decades of academic research, transmit power levels are still, in practice, statically assigned to satisfy uniform coverage objectives. Yet each network comes with its unique distribution of users in space, calling for a power control that adapts to users' probabilities of presence, for example, placing the areas with higher interference probabilities where user density is the lowest. Although nice on paper, putting this simple idea in practice comes with a number of challenges, with gains that are difficult to estimate, if any at all. This paper is the first to address these challenges and evaluate in a production network serving thousands of daily users the benefits of a user-aware transmit power control system. Along the way, we contribute a novel approach to reason about user densities of presence from historical IEEE 802.11k data, as well as a new machine learning approach to impute missing signal-strength measurements. Results of a thorough experimental campaign show feasibility and quantify the gains: compared to state-of-the-art solutions, the new system can increase the median signal strength by 15dBm, while decreasing airtime interference at the same time. This comes at an affordable cost of a 5dBm decrease in uplink signal due to lack of terminal cooperation.

Prediction has recently been considered as a promising approach to meet low-latency and high-reliability requirements in long-distance haptic communications. However, most of the existing methods did not take features of tasks and the relationship between prediction and communication into account. In this paper, we propose a task-oriented prediction and communication co-design framework, where the reliability of the system depends on prediction errors and packet losses in communications. The goal is to minimize the required radio resources subject to the low-latency and high-reliability requirements of various tasks. Specifically, we consider the just noticeable difference (JND) as a performance metric for the haptic communication system. We collect experiment data from a real-world teleoperation testbed and use time-series generative adversarial networks (TimeGAN) to generate a large amount of synthetic data. This allows us to obtain the relationship between the JND threshold, prediction horizon, and the overall reliability including communication reliability and prediction reliability. We take 5G New Radio as an example to demonstrate the proposed framework and optimize bandwidth allocation and data rates of devices. Our numerical and experimental results show that the proposed framework can reduce wireless resource consumption up to 77.80% compared with a task-agnostic benchmark.

IoT time series analysis has found numerous applications in a wide variety of areas, ranging from health informatics to network security. Nevertheless, the complex spatial temporal dynamics and high dimensionality of IoT time series make the analysis increasingly challenging. In recent years, the powerful feature extraction and representation learning capabilities of deep learning (DL) have provided an effective means for IoT time series analysis. However, few existing surveys on time series have systematically discussed unsupervised DL-based methods. To fill this void, we investigate unsupervised deep learning for IoT time series, i.e., unsupervised anomaly detection and clustering, under a unified framework. We also discuss the application scenarios, public datasets, existing challenges, and future research directions in this area.

Convolutional neural networks (CNN) are widely used in resource-constrained devices in IoT applications. In order to reduce the computational complexity and memory footprint, the resource-constrained devices use fixed-point representation. This representation consumes less area and energy in hardware with similar classification accuracy compared to the floating-point ones. However, to employ the low-precision fixed-point representation, various considerations to gain high accuracy are required. Although many quantization and re-training techniques are proposed to improve the inference accuracy, these approaches are time-consuming and require access to the entire dataset. This paper investigates the effect of different fixed-point hardware units on CNN inference accuracy. To this end, we provide a framework called Fixflow to evaluate the effect of fixed-point computations performed at hardware level on CNN classification accuracy. We can employ different fixed-point considerations at the hardware accelerators.This includes rounding methods and adjusting the precision of the fixed-point operation's result. Fixflow can determine the impact of employing different arithmetic units (such as truncated multipliers) on CNN classification accuracy. Moreover, we evaluate the energy and area consumption of these units in hardware accelerators. We perform experiments on two common MNIST and CIFAR-10 datasets. Our results show that employing different methods at the hardware level specially with low-precision, can significantly change the classification accuracy.

We study the problem of real-time scheduling in a multi-hop millimeter-wave (mmWave) mesh. We develop a model-free deep reinforcement learning algorithm called Adaptive Activator RL (AARL), which determines the subset of mmWave links that should be activated during each time slot and the power level for each link. The most important property of AARL is its ability to make scheduling decisions within the strict time slot constraints of typical 5G mmWave networks. AARL can handle a variety of network topologies, network loads, and interference models, it can also adapt to different workloads. We demonstrate the operation of AARL on several topologies: a small topology with 10 links, a moderately-sized mesh with 48 links, and a large topology with 96 links. We show that for each topology, we compare the throughput obtained by AARL to that of a benchmark algorithm called RPMA (Residual Profit Maximizer Algorithm). The most important advantage of AARL compared to RPMA is that it is much faster and can make the necessary scheduling decisions very rapidly during every time slot, while RPMA cannot. In addition, the quality of the scheduling decisions made by AARL outperforms those made by RPMA.

Future AI applications require performance, reliability and privacy that the existing, cloud-dependant system architectures cannot provide. In this article, we study orchestration in the device-edge-cloud continuum, and focus on edge AI for resource orchestration. We claim that to support the constantly growing requirements of intelligent applications in the device-edge-cloud computing continuum, resource orchestration needs to embrace edge AI and emphasize local autonomy and intelligence. To justify the claim, we provide a general definition for continuum orchestration, and look at how current and emerging orchestration paradigms are suitable for the computing continuum. We describe certain major emerging research themes that may affect future orchestration, and provide an early vision of an orchestration paradigm that embraces those research themes. Finally, we survey current key edge AI methods and look at how they may contribute into fulfilling the vision of future continuum orchestration.

In this work, we share our experience on tele-knowledge pre-training for fault analysis, a crucial task in telecommunication applications that requires a wide range of knowledge normally found in both machine log data and product documents. To organize this knowledge from experts uniformly, we propose to create a Tele-KG (tele-knowledge graph). Using this valuable data, we further propose a tele-domain language pre-training model TeleBERT and its knowledge-enhanced version, a tele-knowledge re-training model KTeleBERT. which includes effective prompt hints, adaptive numerical data encoding, and two knowledge injection paradigms. Concretely, our proposal includes two stages: first, pre-training TeleBERT on 20 million tele-related corpora, and then re-training it on 1 million causal and machine-related corpora to obtain KTeleBERT. Our evaluation on multiple tasks related to fault analysis in tele-applications, including root-cause analysis, event association prediction, and fault chain tracing, shows that pre-training a language model with tele-domain data is beneficial for downstream tasks. Moreover, the KTeleBERT re-training further improves the performance of task models, highlighting the effectiveness of incorporating diverse tele-knowledge into the model.

We study speech enhancement using deep learning (DL) for virtual meetings on cellular devices, where transmitted speech has background noise and transmission loss that affects speech quality. Since the Deep Noise Suppression (DNS) Challenge dataset of Interspeech 2020 does not contain practical disturbance, we collect a transmitted DNS (t-DNS) dataset using Zoom Meetings over T-Mobile network. We select two baseline models: Demucs and FullSubNet. The Demucs is an endto-end model that takes time-domain inputs and outputs time-domain denoised speech, and the FullSubNet takes time-frequency-domain inputs and outputs the energy ratio of the target speech in the inputs. The goal of this project is to enhance the speech transmitted over the cellular networks using deep learning models.

This paper details the design of an autonomous alignment and tracking platform to mechanically steer directional horn antennas in a sliding correlator channel sounder setup for 28 GHz V2X propagation modeling. A pan-and-tilt subsystem facilitates uninhibited rotational mobility along the yaw and pitch axes, driven by open-loop servo units and orchestrated via inertial motion controllers. A geo-positioning subsystem augmented in accuracy by real-time kinematics enables navigation events to be shared between a transmitter and receiver over an Apache Kafka messaging middleware framework with fault tolerance. Herein, our system demonstrates a 3D geo-positioning accuracy of 17 cm, an average principal axes positioning accuracy of 1.1 degrees, and an average tracking response time of 27.8 ms. Crucially, fully autonomous antenna alignment and tracking facilitates continuous series of measurements, a unique yet critical necessity for millimeter wave channel modeling in vehicular networks. The power-delay profiles, collected along routes spanning urban and suburban neighborhoods on the NSF POWDER testbed, are used in pathloss evaluations involving the 3GPP TR38.901 and ITU-R M.2135 standards. Empirically, we demonstrate that these models fail to accurately capture the 28 GHz pathloss behavior in urban foliage and suburban radio environments. In addition to RMS direction-spread analyses for angles-of-arrival via the SAGE algorithm, we perform signal decoherence studies wherein we derive exponential models for the spatial/angular autocorrelation coefficient under distance and alignment effects.