Traditional communications focus on regular and orthogonal signal waveforms for simplified signal processing and improved spectral efficiency. In contrast, the next-generation communications would aim for irregular and non-orthogonal signal waveforms to introduce new capabilities. This work proposes a spectrally efficient irregular Sinc (irSinc) shaping technique, revisiting the traditional Sinc back to 1924, with the aim of enhancing performance in industrial Internet of things (IIoT). In time-critical IIoT applications, low-latency and time-jitter tolerance are two critical factors that significantly impact the performance and reliability. Recognizing the inevitability of latency and jitter in practice, this work aims to propose a waveform technique to mitigate these effects via reducing latency and enhancing the system robustness under time jitter effects. The utilization of irSinc yields a signal with increased spectral efficiency without sacrificing error performance. Integrating the irSinc in a two-stage framework, a single-carrier non-orthogonal frequency shaping (SC-NOFS) waveform is developed, showcasing perfect compatibility with 5G standards, enabling the direct integration of irSinc in existing industrial IoT setups. Through 5G standard signal configuration, our signal achieves faster data transmission within the same spectral bandwidth. Hardware experiments validate an 18% saving in timing resources, leading to either reduced latency or enhanced jitter tolerance.

Control systems are indispensable for ensuring the safety of cyber-physical systems (CPS), spanning various domains such as automobiles, airplanes, and missiles. Safeguarding CPS necessitates runtime methodologies that continuously monitor safety-critical conditions and respond in a verifiably safe manner. A fundamental aspect of many safety approaches involves predicting the future behavior of systems. However, achieving this requires accurate models that can operate in real time. Motivated by DeepONets, we propose a novel strategy that combines the inductive bias of B-splines with data-driven neural networks to facilitate real-time predictions of CPS behavior. We introduce our hybrid B-spline neural operator, establishing its capability as a universal approximator and providing rigorous bounds on the approximation error. These findings are applicable to a broad class of nonlinear autonomous systems and are validated through experimentation on a controlled 6-degree-of-freedom (DOF) quadrotor with a 12 dimensional state space. Furthermore, we conduct a comparative analysis of different network architectures, specifically fully connected networks (FCNN) and recurrent neural networks (RNN), to elucidate the practical utility and trade-offs associated with each architecture in real-world scenarios.

This paper introduces E(n) Equivariant Message Passing Cellular Networks (EMPCNs), an extension of E(n) Equivariant Graph Neural Networks to CW-complexes. Our approach addresses two aspects of geometric message passing networks: 1) enhancing their expressiveness by incorporating arbitrary cells, and 2) achieving this in a computationally efficient way with a decoupled EMPCNs technique. We demonstrate that EMPCNs achieve close to state-of-the-art performance on multiple tasks without the need for steerability, including many-body predictions and motion capture. Moreover, ablation studies confirm that decoupled EMPCNs exhibit stronger generalization capabilities than their non-topologically informed counterparts. These findings show that EMPCNs can be used as a scalable and expressive framework for higher-order message passing in geometric and topological graphs

Fifth-generation (5G) core networks in network digital twins (NDTs) are complex systems with numerous components, generating considerable data. Analyzing these data can be challenging due to rare failure types, leading to imbalanced classes in multiclass classification. To address this problem, we propose a novel method of integrating a graph Fourier transform (GFT) into a message-passing neural network (MPNN) designed for NDTs. This approach transforms the data into a graph using the GFT to address class imbalance, whereas the MPNN extracts features and models dependencies between network components. This combined approach identifies failure types in real and simulated NDT environments, demonstrating its potential for accurate failure classification in 5G and beyond (B5G) networks. Moreover, the MPNN is adept at learning complex local structures among neighbors in an end-to-end setting. Extensive experiments have demonstrated that the proposed approach can identify failure types in three multiclass domain datasets at multiple failure points in real networks and NDT environments. The results demonstrate that the proposed GFT-MPNN can accurately classify network failures in B5G networks, especially when employed within NDTs to detect failure types.

In recent years, machine learning (ML) techniques have created numerous opportunities for intelligent mobile networks and have accelerated the automation of network operations. However, complex network tasks may involve variables and considerations even beyond the capacity of traditional ML algorithms. On the other hand, large language models (LLMs) have recently emerged, demonstrating near-human-level performance in cognitive tasks across various fields. However, they remain prone to hallucinations and often lack common sense in basic tasks. Therefore, they are regarded as assistive tools for humans. In this work, we propose the concept of "generative AI-in-the-loop" and utilize the semantic understanding, context awareness, and reasoning abilities of LLMs to assist humans in handling complex or unforeseen situations in mobile communication networks. We believe that combining LLMs and ML models allows both to leverage their respective capabilities and achieve better results than either model alone. To support this idea, we begin by analyzing the capabilities of LLMs and compare them with traditional ML algorithms. We then explore potential LLM-based applications in line with the requirements of next-generation networks. We further examine the integration of ML and LLMs, discussing how they can be used together in mobile networks. Unlike existing studies, our research emphasizes the fusion of LLMs with traditional ML-driven next-generation networks and serves as a comprehensive refinement of existing surveys. Finally, we provide a case study to enhance ML-based network intrusion detection with synthesized data generated by LLMs. Our case study further demonstrates the advantages of our proposed idea.

The convergence of communication and computation, along with the integration of machine learning and artificial intelligence, stand as key empowering pillars for the sixth-generation of communication systems (6G). This paper considers a network of one base station serving a number of devices simultaneously using spatial multiplexing. The paper then presents an innovative deep learning-based approach to simultaneously manage the transmit and computing powers, alongside computation allocation, amidst uncertainties in both channel and computing states information. More specifically, the paper aims at proposing a robust solution that minimizes the worst-case delay across the served devices subject to computation and power constraints. The paper uses a deep neural network (DNN)-based solution that maps estimated channels and computation requirements to optimized resource allocations. During training, uncertainty samples are injected after the DNN output to jointly account for both communication and computation estimation errors. The DNN is then trained via backpropagation using the robust utility, thus implicitly learning the uncertainty distributions. Our results validate the enhanced robust delay performance of the joint uncertainty injection versus the classical DNN approach, especially in high channel and computational uncertainty regimes.

This paper explores the integration of active machine learning (ML) for 6G networks, an area that remains under-explored yet holds potential. Unlike passive ML systems, active ML can be made to interact with the network environment. It actively selects informative and representative data points for training, thereby reducing the volume of data needed while accelerating the learning process. While active learning research mainly focuses on data annotation, we call for a network-centric active learning framework that considers both annotation (i.e., what is the label) and data acquisition (i.e., which and how many samples to collect). Moreover, we explore the synergy between generative artificial intelligence (AI) and active learning to overcome existing limitations in both active learning and generative AI. This paper also features a case study on a mmWave throughput prediction problem to demonstrate the practical benefits and improved performance of active learning for 6G networks. Furthermore, we discuss how the implications of active learning extend to numerous 6G network use cases. We highlight the potential of active learning based 6G networks to enhance computational efficiency, data annotation and acquisition efficiency, adaptability, and overall network intelligence. We conclude with a discussion on challenges and future research directions for active learning in 6G networks, including development of novel query strategies, distributed learning integration, and inclusion of human- and machine-in-the-loop learning.

In this paper, we address the problem of uncertainty quantification for cellular network speed. It is a well-known fact that the actual internet speed experienced by a mobile phone can fluctuate significantly, even when remaining in a single location. This high degree of variability underscores that mere point estimation of network speed is insufficient. Rather, it is advantageous to establish a prediction interval that can encompass the expected range of speed variations. In order to build an accurate network estimation map, numerous mobile data need to be collected at different locations. Currently, public datasets rely on users to upload data through apps. Although massive data has been collected, the datasets suffer from significant noise due to the nature of cellular networks and various other factors. Additionally, the uneven distribution of population density affects the spatial consistency of data collection, leading to substantial uncertainty in the network quality maps derived from this data. We focus our analysis on large-scale internet-quality datasets provided by Ookla to construct an estimated map of connection quality. To improve the reliability of this map, we introduce a novel conformal prediction technique to build an uncertainty map. We identify regions with heightened uncertainty to prioritize targeted, manual data collection. In addition, the uncertainty map quantifies how reliable the prediction is in different areas. Our method also leads to a sampling strategy that guides researchers to selectively gather high-quality data that best complement the current dataset to improve the overall accuracy of the prediction model.

Large Language Models (LLMs) are continuously being applied in a more diverse set of contexts. At their current state, however, even state-of-the-art LLMs such as Generative Pre-Trained Transformer 4 (GTP-4) have challenges when extracting information from real-world technical documentation without a heavy preprocessing. One such area with real-world technical documentation is telecommunications engineering, which could greatly benefit from domain-specific LLMs. The unique format and overall structure of telecommunications internal specifications differs greatly from standard English and thus it is evident that the application of out-of-the-box Natural Language Processing (NLP) tools is not a viable option. In this article, we outline the limitations of out-of-the-box NLP tools for processing technical information generated by telecommunications experts, and expand the concept of Technical Language Processing (TLP) to the telecommunication domain. Additionally, we explore the effect of domain-specific LLMs in the work of Specification Engineers, emphasizing the potential benefits of adopting domain-specific LLMs to speed up the training of experts in different telecommunications fields.

In the modern era, mobile phones have become ubiquitous, and Short Message Service (SMS) has grown to become a multi-million-dollar service due to the widespread adoption of mobile devices and the millions of people who use SMS daily. However, SMS spam has also become a pervasive problem that endangers users' privacy and security through phishing and fraud. Despite numerous spam filtering techniques, there is still a need for a more effective solution to address this problem [1]. This research addresses the pervasive issue of SMS spam, which poses threats to users' privacy and security. Despite existing spam filtering techniques, the high false-positive rate persists as a challenge. The study introduces a novel approach utilizing Natural Language Processing (NLP) and machine learning models, particularly BERT (Bidirectional Encoder Representations from Transformers), for SMS spam detection and classification. Data preprocessing techniques, such as stop word removal and tokenization, are applied, along with feature extraction using BERT. Machine learning models, including SVM, Logistic Regression, Naive Bayes, Gradient Boosting, and Random Forest, are integrated with BERT for differentiating spam from ham messages. Evaluation results revealed that the Na\"ive Bayes classifier + BERT model achieves the highest accuracy at 97.31% with the fastest execution time of 0.3 seconds on the test dataset. This approach demonstrates a notable enhancement in spam detection efficiency and a low false-positive rate. The developed model presents a valuable solution to combat SMS spam, ensuring faster and more accurate detection. This model not only safeguards users' privacy but also assists network providers in effectively identifying and blocking SMS spam messages.