Multimodal time series forecasting is foundational in various fields, such as utilizing satellite imagery and numerical data for predicting typhoons in climate science. However, existing multimodal approaches primarily focus on utilizing text data to help time series forecasting, leaving the visual data in existing time series datasets untouched. Furthermore, it is challenging for models to effectively capture the physical information embedded in visual data, such as satellite imagery's temporal and geospatial context, which extends beyond images themselves. To address this gap, we propose physics-informed positional e ncoding ( PIPE), a lightweight method that embeds physical information into vision language models (VLMs). PIPE introduces two key innovations: (1) a physics-informed positional indexing scheme for mapping physics to positional IDs, and (2) a variant-frequency positional encoding mechanism for encoding frequency information of physical variables and sequential order of tokens within the embedding space. By preserving both the physical information and sequential order information, PIPE significantly improves multimodal alignment and forecasting accuracy. Through the experiments on the most representative and the largest open-sourced satellite image dataset, PIPE achieves state-of-the-art performance in both deep learning forecasting and climate domain methods, demonstrating superiority across benchmarks, including a 12% improvement in typhoon intensity forecasting over prior works. Our code is provided in the supplementary material.

Handling objects with unknown or changing masses is a common challenge in robotics, often leading to errors or instability if the control system cannot adapt in real-time. In this paper, we present a novel approach that enables a six-degrees-of-freedom robotic manipulator to reliably follow waypoints while automatically estimating and compensating for unknown payload weight. Our method integrates an admittance control framework with a mass estimator, allowing the robot to dynamically update an excitation force to compensate for the payload mass. This strategy mitigates end-effector sagging and preserves stability when handling objects of unknown weights. We experimentally validated our approach in a challenging pick-and-place task on a shelf with a crossbar, improved accuracy in reaching waypoints and compliant motion compared to a baseline admittance-control scheme. By safely accommodating unknown payloads, our work enhances flexibility in robotic automation and represents a significant step forward in adaptive control for uncertain environments.

This paper presents a data-integrated framework for learning the dynamics of fractional-order nonlinear systems in both discrete-time and continuous-time settings. The proposed framework consists of two main steps. In the first step, input-output experiments are designed to generate the necessary datasets for learning the system dynamics, including the fractional order, the drift vector field, and the control vector field. In the second step, these datasets, along with the memory-dependent property of fractional-order systems, are used to estimate the system's fractional order. The drift and control vector fields are then reconstructed using orthonormal basis functions. To validate the proposed approach, the algorithm is applied to four benchmark fractional-order systems. The results confirm the effectiveness of the proposed framework in learning the system dynamics accurately . Finally, the same datasets are used to learn equivalent integer-order models. The numerical comparisons demonstrate that fractional-order models better capture long-range dependencies, highlighting the limitations of integer-order representations.

Recent advancements in reinforcement learning (RL) have led to significant progress in humanoid robot locomotion, simplifying the design and training of motion policies in simulation. However, the numerous implementation details make transferring these policies to real-world robots a challenging task. To address this, we have developed a comprehensive code framework that covers the entire process from training to deployment, incorporating common RL training methods, domain randomization, reward function design, and solutions for handling parallel structures. This library is made available as a community resource, with detailed descriptions of its design and experimental results. We validate the framework on the Booster T1 robot, demonstrating that the trained policies seamlessly transfer to the physical platform, enabling capabilities such as omnidirectional walking, disturbance resistance, and terrain adaptability. We hope this work provides a convenient tool for the robotics community, accelerating the development of humanoid robots. The code can be found in https://github.com/BoosterRobotics/booster_gym.

-- Generating motions for robots interacting with objects of various shapes is a complex challenge, further complicated by the robot's geometry and multiple desired behaviors. While current robot programming tools (such as inverse kinematics, collision avoidance, and manipulation planning) often treat these problems as constrained optimization, many existing solvers focus on specific problem domains or do not exploit geometric constraints effectively. We propose an efficient first-order method, Augmented Lagrangian Spectral Projected Gradient Descent (ALSPG), which leverages geometric projections via Euclidean projections, Minkowski sums, and basis functions. We show that by using geometric constraints rather than full constraints and gradients, ALSPG significantly improves real-time performance. Compared to second-order methods like iLQR, ALSPG remains competitive in the unconstrained case. We validate our method through toy examples and extensive simulations, and demonstrate its effectiveness on a 7-axis Franka robot, a 6-axis P-Rob robot and a 1:10 scale car in real-world experiments. Source codes, experimental data and videos are available on the project webpage: https://sites.google.com/view/alspg-oc

Determining onflow parameters is crucial from the perspectives of wind tunnel testing and regular flight and wind turbine operations. These parameters have traditionally been predicted via direct measurements which might lead to challenges in case of sensor faults. Alternatively, a data-driven prediction model based on surface pressure data can be used to determine these parameters. It is essential that such predictors achieve close to real-time learning as dictated by practical applications such as monitoring wind tunnel operations or learning the variations in aerodynamic performance of aerospace and wind energy systems. To overcome the challenges caused by changes in the data distribution as well as in adapting to a new prediction task, we propose a transfer learning methodology to predict the onflow parameters, specifically angle of attack and onflow speed. It requires first training a convolutional neural network (ConvNet) model offline for the core prediction task, then freezing the weights of this model except the selected layers preceding the output node, and finally executing transfer learning by retraining these layers. A demonstration of this approach is provided using steady CFD analysis data for an airfoil for i) domain adaptation where transfer learning is performed with data from a target domain having different data distribution than the source domain and ii) task adaptation where the prediction task is changed. Further exploration on the influence of noisy data, performance on an extended domain, and trade studies varying sampling sizes and architectures are provided. Results successfully demonstrate the potential of the approach for adaptation to changing data distribution, domain extension, and task update while the application for noisy data is concluded to be not as effective.

We present a novel under-actuated gripper with two 3-joint fingers, which realizes force feedback control by the deep learning technique- Long Short-Term Memory (LSTM) model, without any force sensor. First, a five-linkage mechanism stacked by double four-linkages is designed as a finger to automatically achieve the transformation between parallel and enveloping grasping modes. This enables the creation of a low-cost under-actuated gripper comprising a single actuator and two 3-phalange fingers. Second, we devise theoretical models of kinematics and power transmission based on the proposed gripper, accurately obtaining fingertip positions and contact forces. Through coupling and decoupling of five-linkage mechanisms, the proposed gripper offers the expected capabilities of grasping payload/force/stability and objects with large dimension ranges. Third, to realize the force control, an LSTM model is proposed to determine the grasping mode for synthesizing force-feedback control policies that exploit contact sensing after outlining the uncertainty of currents using a statistical method. Finally, a series of experiments are implemented to measure quantitative indicators, such as the payload, grasping force, force sensing, grasping stability and the dimension ranges of objects to be grasped. Additionally, the grasping performance of the proposed gripper is verified experimentally to guarantee the high versatility and robustness of the proposed gripper.

Wybot's solar skimmer does a surprisingly good job of grabbing leaves off the surface of the pool, but its loud operation and poor power management knock it down a peg. Solar-powered pool skimmers flit along the surface of your pool operating under the idea that if they can scoop up debris before it sinks, you won't need to clean the bottom of the pool. It sounds logical, but in practice, most pool skimmers don't do the absolute best of jobs--there's only so much surface area a skimmer can cover before leaves get waterlogged and sink to the depths. But robotic skimmers are better than nothing, especially if you don't have a good in-wall skimmer. The Wybot F1 Pool Skimmer was much more effective at capturing floating leaves than any skimmer I've used to date.

-- Quadrotor Morpho-Transition, or the act of transitioning from air to ground through mid-air transformation, involves complex aerodynamic interactions and a need to operate near actuator saturation, complicating controller design. In recent work, morpho-transition has been studied from a model-based control perspective, but these approaches remain limited due to unmodeled dynamics and the requirement for planning through contacts. Here, we train an end-to-end Reinforcement Learning (RL) controller to learn a morpho-transition policy and demonstrate successful transfer to hardware. We find that the RL control policy achieves agile landing, but only transfers to hardware if motor dynamics and observation delays are taken into account. On the other hand, a baseline MPC controller transfers out-of-the-box without knowledge of the actuator dynamics and delays, at the cost of reduced recovery from disturbances in the event of unknown actuator failures. Our work opens the way for more robust control of agile in-flight quadrotor maneuvers that require mid-air transformation. Ground aerial robotic systems are ideally poised to increase the reliability and scope of autonomous robotic missions.

--The reliability of machine learning (ML) software systems is heavily influenced by changes in data over time. For that reason, ML systems require regular maintenance, typically based on model retraining. However, retraining requires significant computational demand, which makes it energy-intensive and raises concerns about its environmental impact. T o understand which retraining techniques should be considered when designing sustainable ML applications, in this work, we study the energy consumption of common retraining techniques. Since the accuracy of ML systems is also essential, we compare retraining techniques in terms of both energy efficiency and accuracy. We showcase that retraining with only the most recent data, compared to all available data, reduces energy consumption by up to 25%, being a sustainable alternative to the status quo. Furthermore, our findings show that retraining a model only when there is evidence that updates are necessary, rather than on a fixed schedule, can reduce energy consumption by up to 40%, provided a reliable data change detector is in place. Our findings pave the way for better recommendations for ML practitioners, guiding them toward more energy-efficient retraining techniques when designing sustainable ML software systems. The increasing adoption of Machine Learning (ML) and Artificial Intelligence (AI) within organizations has resulted in the development of more ML/AI software systems [1]. Although ML/AI brings plenty of business value, it is known that the accuracy of ML applications decreases over time [2]. Thus, ML developers must monitor and maintain their ML systems in production. One reason for this phenomenon is the fact that ML applications are highly dependent on the data on which they have been trained. Real-world data usually changes over time [3] - a phenomenon often referred to as concept drift [4] - which can significantly impact the normal operation of ML systems [5]. Therefore, appropriate maintenance techniques are required for the design of ML software systems. One common approach to maintaining these systems is to periodically update these applications by retraining the underlying ML models with the latest version of the data [6], [7]. On another note, the process of training machine learning models has raised substantial concerns about the carbon footprint of ML applications [8], [9].