Fox News anchor Bret Baier examines the U.S. power supply on'Special Report.' If your electricity bill seems shockingly high, you're not imagining it. A big part of the spike is being driven by rising artificial intelligence electricity demand. PJM Interconnection, the largest power grid operator in the United States, says electricity usage is climbing sharply this summer. Some areas may see bills increase by as much as 20%.

A solar-powered surveillance drone with a wingspan larger than a Boeing 747 jumbo jet could fly for weeks or months at a time, according to its operator, while watching for drug-smuggling vessels, pirates or naval warships. It has been performing test flights off the US Gulf Coast this month. The Skydweller drone, operated by US-Spanish firm Skydweller Aero, has a wingspan of 72 metres – exceeding the width of most commercial passenger jets. But it weighs only about 2500 kilograms – as much as a Ford F-150 truck. It is based on the Solar Impulse 2 aircraft, which performed the first solar-powered flight around the world in 2016. Skydweller Aero purchased and converted the pioneering aircraft with the goal of building a fleet of similar solar-powered, carbon-fibre drones capable of "perpetual flight" at altitudes exceeding 13 kilometres in daytime hours.

Breakthroughs, discoveries, and DIY tips sent every weekday. A new type of 3D printer could help households do their part to reduce food waste while also producing some nifty household accessories. In 2019 alone, the US generated 66 million tons of food waste. The majority of that waste (60 percent) ended up in landfills. According to one EPA report, the carbon dioxide generated from food waste is equivalent to the emissions of 42 coal-fired power plants.

This project presents the development of a gait recognition system using Tiny Machine Learning (Tiny ML) and Inertial Measurement Unit (IMU) sensors. The system leverages the XIAO-nRF52840 Sense microcontroller and the LSM6DS3 IMU sensor to capture motion data, including acceleration and angular velocity, from four distinct activities: walking, stationary, going upstairs, and going downstairs. The data collected is processed through Edge Impulse, an edge AI platform, which enables the training of machine learning models that can be deployed directly onto the microcontroller for real-time activity classification.The data preprocessing step involves extracting relevant features from the raw sensor data using techniques such as sliding windows and data normalization, followed by training a Deep Neural Network (DNN) classifier for activity recognition. The model achieves over 80% accuracy on a test dataset, demonstrating its ability to classify the four activities effectively. Additionally, the platform enables anomaly detection, further enhancing the robustness of the system. The integration of Tiny ML ensures low-power operation, making it suitable for battery-powered or energy-harvesting devices.

In recent years, Compressed Sensing (CS) has gained significant interest as a technique for acquiring high-resolution sensory data using fewer measurements than traditional Nyquist sampling requires. At the same time, autonomous robotic platforms such as drones and rovers have become increasingly popular tools for remote sensing and environmental monitoring tasks, including measurements of temperature, humidity, and air quality. Within this context, this paper presents, to the best of our knowledge, the first investigation into how the structure of CS measurement matrices can be exploited to design optimized sampling trajectories for robotic environmental data collection. We propose a novel Monte Carlo optimization framework that generates measurement matrices designed to minimize both the robot's traversal path length and the signal reconstruction error within the CS framework. Central to our approach is the application of Dictionary Learning (DL) to obtain a data-driven sparsifying transform, which enhances reconstruction accuracy while further reducing the number of samples that the robot needs to collect. We demonstrate the effectiveness of our method through experiments reconstructing $NO_2$ pollution maps over the Gulf region. The results indicate that our approach can reduce robot travel distance to less than $10\%$ of a full-coverage path, while improving reconstruction accuracy by over a factor of five compared to traditional CS methods based on DCT and polynomial dictionaries, as well as by a factor of two compared to previously-proposed Informative Path Planning (IPP) methods.

The Tibetan Plateau, known as the Asian Water Tower, faces significant water security challenges due to its high sensitivity to climate change. Advancing Earth observation for sustainable water monitoring is thus essential for building climate resilience in this region. This study proposes a two-stage transfer learning strategy using the SegFormer model to overcome domain shift and data scarcit--key barriers in developing robust AI for climate-sensitive applications. After pre-training on a diverse source domain, our model was fine-tuned for the arid Zhada Tulin area. Experimental results show a substantial performance boost: the Intersection over Union (IoU) for water body segmentation surged from 25.50% (direct transfer) to 64.84%. This AI-driven accuracy is crucial for disaster risk reduction, particularly in monitoring flash flood-prone systems. More importantly, the high-precision map reveals a highly concentrated spatial distribution of water, with over 80% of the water area confined to less than 20% of the river channel length. This quantitative finding provides crucial evidence for understanding hydrological processes and designing targeted water management and climate adaptation strategies. Our work thus demonstrates an effective technical solution for monitoring arid plateau regions and contributes to advancing AI-powered Earth observation for disaster preparedness in critical transboundary river headwaters.

The sparse identification of nonlinear dynamics (SINDy) approach can discover the governing equations of dynamical systems based on measurement data, where the dynamical model is identified as the sparse linear combination of the given basis functions. A major challenge in SINDy is the design of a library, which is a set of candidate basis functions, as the appropriate library is not trivial for many dynamical systems. To overcome this difficulty, this study proposes SINDy with library optimization mechanism (SINDy-LOM), which is a combination of the sparse regression technique and the novel learning strategy of the library. In the proposed approach, the basis functions are parametrized. The SINDy-LOM approach involves a two-layer optimization architecture: the inner-layer, in which the data-driven model is extracted as the sparse linear combination of the candidate basis functions, and the outer-layer, in which the basis functions are optimized from the viewpoint of the recursive long-term (RLT) prediction accuracy; thus, the library design is reformulated as the optimization of the parametrized basis functions. The resulting SINDy-LOM model has good interpretability and usability, as the proposed approach yields the parsimonious model. The library optimization mechanism significantly reduces user burden. The RLT perspective improves the reliability of the resulting model compared with the traditional SINDy approach that can only ensure the one-step-ahead prediction accuracy. The validity of the proposed approach is demonstrated by applying it to a diesel engine airpath system, which is a well-known complex industrial system.

The growing need for intelligent, adaptive, and energy-efficient autonomous systems across fields such as robotics, mobile agents (e.g., UAVs), and self-driving vehicles is driving interest in neuromorphic computing. By drawing inspiration from biological neural systems, neuromorphic approaches offer promising pathways to enhance the perception, decision-making, and responsiveness of autonomous platforms. This paper surveys recent progress in neuromorphic algorithms, specialized hardware, and cross-layer optimization strategies, with a focus on their deployment in real-world autonomous scenarios. Special attention is given to event-based dynamic vision sensors and their role in enabling fast, efficient perception. The discussion highlights new methods that improve energy efficiency, robustness, adaptability, and reliability through the integration of spiking neural networks into autonomous system architectures. We integrate perspectives from machine learning, robotics, neuroscience, and neuromorphic engineering to offer a comprehensive view of the state of the field. Finally, emerging trends and open challenges are explored, particularly in the areas of real-time decision-making, continual learning, and the development of secure, resilient autonomous systems.

Land Use Land Cover (LULC) mapping is essential for urban and resource planning, and is one of the key elements in developing smart and sustainable cities.This study evaluates advanced LULC mapping techniques, focusing on Look-Up Table (LUT)-based Atmospheric Correction applied to Cartosat Multispectral (MX) sensor images, followed by supervised and semi-supervised learning models for LULC prediction. We explore DeeplabV3+ and Cross-Pseudo Supervision (CPS). The CPS model is further refined with dynamic weighting, enhancing pseudo-label reliability during training. This comprehensive approach analyses the accuracy and utility of LULC mapping techniques for various urban planning applications. A case study of Hyderabad, India, illustrates significant land use changes due to rapid urbanization. By analyzing Cartosat MX images over time, we highlight shifts such as urban sprawl, shrinking green spaces, and expanding industrial areas. This demonstrates the practical utility of these techniques for urban planners and policymakers.

Multipactor is a nonlinear electron avalanche phenomenon that can severely impair the performance of high-power radio frequency (RF) devices and accelerator systems. Accurate prediction of multipactor susceptibility across different materials and operational regimes remains a critical yet computationally intensive challenge in accelerator component design and RF engineering. This study presents the first application of supervised machine learning (ML) for predicting multipactor susceptibility in two-surface planar geometries. A simulation-derived dataset spanning six distinct secondary electron yield (SEY) material profiles is used to train regression models - including Random Forest (RF), Extra Trees (ET), Extreme Gradient Boosting (XGBoost), and funnel-structured Multilayer Perceptrons (MLPs) - to predict the time-averaged electron growth rate, $δ_{avg}$. Performance is evaluated using Intersection over Union (IoU), Structural Similarity Index (SSIM), and Pearson correlation coefficient. Tree-based models consistently outperform MLPs in generalizing across disjoint material domains. MLPs trained using a scalarized objective function that combines IoU and SSIM during Bayesian hyperparameter optimization with 5-fold cross-validation outperform those trained with single-objective loss functions. Principal Component Analysis reveals that performance degradation for certain materials stems from disjoint feature-space distributions, underscoring the need for broader dataset coverage. This study demonstrates both the promise and limitations of ML-based multipactor prediction and lays the groundwork for accelerated, data-driven modeling in advanced RF and accelerator system design.