Artificial Intelligence may seem transient, yet it always managed to have a controversial presence. Recently it raised concerns about its sustainability. In June 2019, the University of Massachusetts at Amherst study discovered that a single large (213 million parameters) Transformer-based neural network built using NAS (commonly used in machine translation) has produced around 626,000 pounds of carbon dioxide. This amount is equivalent to five times more than an average car produces in its lifespan. These massive consumption numbers are because of the energy needed to run specialized hardware like GPUs and TPUs for AI training and development.

The use of artificial intelligence (AI) is based on the idea of optimizing, streamlining and expanding the reach of the most diverse operations. Their systems are programmed to identify patterns and carry out predictions, decisions, and ultimately perform and actions with speed and accuracy. The efficiency of the models depends on the quantity and quality of the data, which can be obtained by applications, cameras, and sensors. In the urban context, technology based on the use of artificial intelligence has been seen as a way to improve the management of cities, especially those that are denser and have larger footprints. Artificial intelligence is often associated with the concept of smart cities.

In this paper, the fuzzy multi-objective reliability redundancy allocation problem (FMORRAP) is proposed, which maximizes the system reliability while simultaneously minimizing the system cost under the type 2 fuzzy uncertainty. In the proposed formulation, the higher order uncertainties (such as parametric, manufacturing, environmental, and designers uncertainty) associated with the system are modeled with interval type 2 fuzzy sets (IT2 FS). The footprint of uncertainty of the interval type 2 membership functions (IT2 MFs) accommodates these uncertainties by capturing the multiple opinions from several system experts. We consider IT2 MFs to represent the subsystem reliability and cost, which are to be further aggregated using extension principle to evaluate the total system reliability and cost according to their configurations, i.e., series parallel and parallel series. We proposed a particle swarm optimization (PSO) based novel solution approach to solve the FMORRAP. To demonstrate the applicability of two formulations, namely, series parallel FMORRAP and parallel series FMORRAP, we performed experimental simulations on various numerical data sets. The decision makers/system experts assign different importance to the objectives (system reliability and cost), and these preferences are represented by sets of weights. The optimal results are obtained from our solution approach, and the Pareto optimal front is established using these different weight sets. The genetic algorithm (GA) was implemented to compare the results obtained from our proposed solution approach. A statistical analysis was conducted between PSO and GA, and it was found that the PSO based Pareto solution outperforms the GA.

Ill-posed linear inverse problems appear in many fields of imaging science and engineering, and are typically addressed by solving optimization problems, which are composed of fidelity and prior terms or constraints. Traditionally, the research has been focused on different prior models, while the least squares (LS) objective has been the common choice for the fidelity term. However, recently a few works have considered a back-projection (BP) based fidelity term as an alternative to the LS, and demonstrated excellent reconstruction results for popular inverse problems. These prior works have also empirically shown that using the BP term, rather than the LS term, requires fewer iterations of plain and accelerated proximal gradient algorithms. In the current paper, we examine the convergence rate of the BP objective for the projected gradient descent (PGD) algorithm and identify an inherent source for its faster convergence compared to the LS objective. Numerical experiments with both $\ell_1$-norm and GAN-based priors corroborate our theoretical results for PGD. We also draw the connection to the observed behavior for proximal methods.

Precipitation data collected at sub-hourly resolution represents specific challenges for missing data recovery by being largely stochastic in nature and highly unbalanced in the duration of rain vs nonrain. Here we present a two-step analysis utilising current machine learning techniques for imputing precipitation data sampled at 30-minute intervals by devolving the task into (a) the classification of rain or non-rain samples, and (b) regressing the absolute values of predicted rain samples. Investigating 37 weather stations in the UK, this machine learning process produces more accurate predictions for recovering precipitation data than an established surface fitting technique utilising neighbouring rain gauges. Increasing available features for the training of machine learning algorithms increases performance with the integration of weather data at the target site with externally sourced rain gauges providing the highest performance. This method informs machine learning models by utilising information in concurrently collected environmental data to make accurate predictions of missing rain data. Capturing complex nonlinear relationships from weakly correlated variables is critical for data recovery at sub-hourly resolutions. Such pipelines for data recovery can be developed and deployed for highly automated and near instantaneous imputation of missing values in ongoing datasets at high temporal resolutions. Keywords: machine learning, data imputation, gradient boosted trees, environmental sensor networks, precipitation, soil moisture 1. Introduction Precipitation data is of critical importance across multiple lines of enquiry, informing statistical models and analysis relating to weather forecasting, extreme weather events, climate change, water-resource management, droughts, flooding, agricultural impact, and hydroelectric power. Historical rainfall data can reveal long term trends in environmental hydrological issues with real-time data input allowing for immediate forecasting of future conditions. Distributed networks of rain gauges are typically used to provide precipitation data at the earth's surface at varying temporal resolutions and can cover large geographical areas (Kidd, 2001). As is the case in many databases, particularly those utilising physical sensors, the problem of missing data arises. Missing data can be a result of sensor failure, data storage/transmission failure, or post-collection quality control procedures resulting in removal of identified problem data (Blenkinsop et al., 2017). Missing data in precipitation databases represents a serious limitation for the effective use of the data. Given the global scale and importance of precipitation and meteorological data (Sun et al., 2018), developing solutions to missing data is of paramount importance for maximising information gain.

As more artificial intelligence applications move to smartphones, deep learning models are getting smaller to allow apps to run faster and save battery power. Now, MIT researchers have a new and better way to compress models. It's so simple that they unveiled it in a tweet last month: Train the model, prune its weakest connections, retrain the model at its fast, early training rate, and repeat, until the model is as tiny as you want. "That's it," says Alex Renda, a PhD student at MIT. "The standard things people do to prune their models are crazy complicated." Renda discussed the technique when the International Conference of Learning Representations (ICLR) convened remotely this month.

As more artificial intelligence applications move to smartphones, deep learning models are getting smaller to allow apps to run faster and save battery power. Now, MIT researchers have a new and better way to compress models. It's so simple that they unveiled it in a tweet last month: Train the model, prune its weakest connections, retrain the model at its fast, early training rate, and repeat, until the model is as tiny as you want. "That's it," says Alex Renda, a PhD student at MIT. "The standard things people do to prune their models are crazy complicated." Renda discussed the technique when the International Conference of Learning Representations (ICLR) convened remotely this month.

Artificial intelligence has become a focus of certain ethical concerns, but it also has some major sustainability issues. Last June, researchers at the University of Massachusetts at Amherst released a startling report estimating that the amount of power required for training and searching a certain neural network architecture involves the emissions of roughly 626,000 pounds of carbon dioxide. This issue gets even more severe in the model deployment phase, where deep neural networks need to be deployed on diverse hardware platforms, each with different properties and computational resources. MIT researchers have developed a new automated AI system for training and running certain neural networks. Results indicate that, by improving the computational efficiency of the system in some key ways, the system can cut down the pounds of carbon emissions involved -- in some cases, down to low triple digits.

Analytica Advisors is a boutique consulting firm engaged in building global capital markets for sustainability leaders among both long-term investors and companies. It focuses on financial and technical innovation for its clients the world over. Development of natural language processing and machine learning tools to analyze structured and unstructured datasets in high and low carbon sectors using company annual reports. COVID19 has accelerated shifts in global energy market such that energy companies and banks may be impacted in the medium to long term. For investors and policy makers it is important to understand the scope and scale of potential change/consolidation from the point of view of individual companies.

Researchers have developed a machine learning method that can predict battery health with ten times higher accuracy than current industry standard, which could aid in the development of safer and more reliable batteries for electric vehicles and consumer electronics. The researchers, from Cambridge and Newcastle Universities, have designed a new way to monitor batteries by sending electrical pulses into them and measuring the response. The measurements are then processed by a machine learning algorithm to predict the battery's health and useful lifespan. Their method is non-invasive and is a simple add-on to any existing battery system. The results are reported here.