Recent Wave Energy Converters (WEC) are equipped with multiple legs and generators to maximize energy generation. Traditional controllers have shown limitations to capture complex wave patterns and the controllers must efficiently maximize the energy capture. This paper introduces a Multi-Agent Reinforcement Learning controller (MARL), which outperforms the traditionally used spring damper controller. Our initial studies show that the complex nature of problems makes it hard for training to converge. Hence, we propose a novel skip training approach which enables the MARL training to overcome performance saturation and converge to more optimum controllers compared to default MARL training, boosting power generation. We also present another novel hybrid training initialization (STHTI) approach, where the individual agents of the MARL controllers can be initially trained against the baseline Spring Damper (SD) controller individually and then be trained one agent at a time or all together in future iterations to accelerate convergence. We achieved double-digit gains in energy efficiency over the baseline Spring Damper controller with the proposed MARL controllers using the Asynchronous Advantage Actor-Critic (A3C) algorithm.

Twelve years ago, the European Union began with the gradual phase-out of energy-inefficient incandescent light bulbs under the Ecodesign Directive. In this work, we implement an agent-based simulation to model the consumer behaviour in the EU lighting market with the goal to explain consumer behaviour and explore alternative policies. Agents are based on the Consumat II model, have individual preferences based on empirical market research, gather experience from past actions, and socially interact with each other in a dynamic environment. Our findings suggest that the adoption of energy-friendly lighting alternatives was hindered by a low level of consumer interest combined with high-enough levels of satisfaction about incandescent bulbs and that information campaigns can partially address this. These findings offer insight into both individual-level driving forces of behaviour and society-level outcomes in a niche market. With this, our work demonstrates the strengths of agent-based models for policy generation and evaluation.

Over the past few years, total financial investment in the agricultural sector has increased substantially. Palm tree is important for many countries' economies, particularly in northern Africa and the Middle East. Monitoring in terms of detection and counting palm trees provides useful information for various stakeholders; it helps in yield estimation and examination to ensure better crop quality and prevent pests, diseases, better irrigation, and other potential threats. Despite their importance, this information is still challenging to obtain. This study systematically reviews research articles between 2011 and 2021 on artificial intelligence (AI) technology for smart palm tree detection. A systematic review (SR) was performed using the PRISMA approach based on a four-stage selection process. Twenty-two articles were included for the synthesis activity reached from the search strategy alongside the inclusion criteria in order to answer to two main research questions. The study's findings reveal patterns, relationships, networks, and trends in applying artificial intelligence in palm tree detection over the last decade. Despite the good results in most of the studies, the effective and efficient management of large-scale palm plantations is still a challenge. In addition, countries whose economies strongly related to intelligent palm services, especially in North Africa, should give more attention to this kind of study. The results of this research could benefit both the research community and stakeholders.

Event cameras are bio-inspired sensors that offer advantages over traditional cameras. They operate asynchronously, sampling the scene at microsecond resolution and producing a stream of brightness changes. This unconventional output has sparked novel computer vision methods to unlock the camera's potential. Here, the problem of event-based stereo 3D reconstruction for SLAM is considered. Most event-based stereo methods attempt to exploit the high temporal resolution of the camera and the simultaneity of events across cameras to establish matches and estimate depth. By contrast, this work investigates how to estimate depth without explicit data association by fusing Disparity Space Images (DSIs) originated in efficient monocular methods. Fusion theory is developed and applied to design multi-camera 3D reconstruction algorithms that produce state-of-the-art results, as confirmed by comparisons with four baseline methods and tests on a variety of available datasets.

In this paper, we propose to solve a regularized distributionally robust learning problem in the decentralized setting, taking into account the data distribution shift. By adding a Kullback-Liebler regularization function to the robust min-max optimization problem, the learning problem can be reduced to a modified robust minimization problem and solved efficiently. Leveraging the newly formulated optimization problem, we propose a robust version of Decentralized Stochastic Gradient Descent (DSGD), coined Distributionally Robust Decentralized Stochastic Gradient Descent (DR-DSGD). Under some mild assumptions and provided that the regularization parameter is larger than one, we theoretically prove that DR-DSGD achieves a convergence rate of $\mathcal{O}\left(1/\sqrt{KT} + K/T\right)$, where $K$ is the number of devices and $T$ is the number of iterations. Simulation results show that our proposed algorithm can improve the worst distribution test accuracy by up to $10\%$. Moreover, DR-DSGD is more communication-efficient than DSGD since it requires fewer communication rounds (up to $20$ times less) to achieve the same worst distribution test accuracy target. Furthermore, the conducted experiments reveal that DR-DSGD results in a fairer performance across devices in terms of test accuracy.

This work proposes a novel 2-D formation control scheme for acyclic triangulated directed graphs (a class of minimally acyclic persistent graphs) based on bipolar coordinates with (almost) global convergence to the desired shape. Prescribed performance control is employed to devise a decentralized control law that avoids singularities and introduces robustness against external disturbances while ensuring predefined transient and steady-state performance for the closed-loop system. Furthermore, it is shown that the proposed formation control scheme can handle formation maneuvering, scaling, and orientation specifications simultaneously. Additionally, the proposed control law is implementable in agents' arbitrarily oriented local coordinate frames using only low-cost onboard vision sensors, which are favorable for practical applications. Finally, a formation maneuvering simulation study verifies the proposed approach.

The multi-source electromechanical coupling makes the energy management of fuel cell electric vehicles (FCEVs) relatively nonlinear and complex especially in the types of 4-wheel-drive (4WD) FCEVs. Accurate state observing for complicated nonlinear system is the basis for fantastic energy managing in FCEVs. Aiming at releasing the energy-saving potential of FCEVs, a novel learning-based robust model predictive control (LRMPC) strategy is proposed for a 4WD FCEV, contributing to suitable power distribution among multiple energy sources. The well-designed strategy based on machine learning (ML) translates the knowledge of the nonlinear system to the explicit controlling scheme with superior robust performance. To start with, ML methods with high regression accuracy and superior generalization ability are trained offline to establish the precise state observer for SOC. Then, explicit data tables for SOC generated by state observer are used for grabbing accurate state changing, whose input features include the vehicle status and the states of vehicle components. To be specific, the vehicle velocity estimation for providing future speed reference is constructed by deep forest. Next, the components including explicit data tables and vehicle velocity estimation are combined with model predictive control (MPC) to release the state-of-the-art energy-saving ability for the multi-freedom system in FCEVs, whose name is LRMPC. At last, the detailed assessment is performed in simulation test to validate the advancing performance of LRMPC. The corresponding results highlight the optimal control effect in energy-saving potential and strong real-time application ability of LRMPC.

Evaluating the efficiency of organizations and branches within an organization is a challenging issue for managers. Evaluation criteria allow organizations to rank their internal units, identify their position concerning their competitors, and implement strategies for improvement and development purposes. Among the methods that have been applied in the evaluation of bank branches, non-parametric methods have captured the attention of researchers in recent years. One of the most widely used non-parametric methods is the data envelopment analysis (DEA) which leads to promising results. However, the static DEA approaches do not consider the time in the model. Therefore, this paper uses a dynamic DEA (DDEA) method to evaluate the branches of a private Iranian bank over three years (2017-2019). The results are then compared with static DEA. After ranking the branches, they are clustered using the K-means method. Finally, a comprehensive sensitivity analysis approach is introduced to help the managers to decide about changing variables to shift a branch from one cluster to a more efficient one.

This paper studies the trade-off between the degree of decentralization and the performance of a distributed controller in a linear-quadratic control setting. We study a system of interconnected agents over a graph and a distributed controller, called $\kappa$-distributed control, which lets the agents make control decisions based on the state information within distance $\kappa$ on the underlying graph. This controller can tune its degree of decentralization using the parameter $\kappa$ and thus allows a characterization of the relationship between decentralization and performance. We show that under mild assumptions, including stabilizability, detectability, and a subexponentially growing graph condition, the performance difference between $\kappa$-distributed control and centralized optimal control becomes exponentially small in $\kappa$. This result reveals that distributed control can achieve near-optimal performance with a moderate degree of decentralization, and thus it is an effective controller architecture for large-scale networked systems.

In a paper recently published in the open-access journal Energies, researchers reviewed and summarized published articles to determine the most promising approach for artificial intelligence (AI) applications in environmental and energy engineering systems. AI is a computer science tool that works on creating intelligent devices, machines, and systems that carry out operations akin to human decision-making and learning. It can comprehend external data and learn from it, and adapt to its learning with practice. Combining AI with the internet of things (IoT) technologies could be another promising approach as this combination can harvest large amounts of data, and the AI can study data patterns to enable task automation for several business benefits. AI has been widely utilized in agriculture, focusing particularly on rice diseases, crop and pest management, product monitoring, and yield prediction. Medical and healthcare applications of AI include the understanding of diseases such as cancer as well as brain and heart disorders.